GDSTIME 40mm x 10mm 4010 Blower Fan 24V Dual Ball Bearing, Ender 3 Upgrade 24 Volt DC Brushless Hotend Part Cooling Fan 2 Pin with 3.3 FT Wires for Ender 3 V3 KE Ender 5 Pro CR-6 SE 3D Printer, 2-Pack
*Price sourced from Amazon.com. Last updated 2026-05-12. Price and availability subject to change.
DescriptionThis is a 3D printer cooling blowing fan, which is made of PBT plastic material. It is excellent for cooling heatsinks on hot ends, prints, or other cooling needs, bearing is high precision, long life and low noise. Containing long life dual ball bearings, the fans can be run continuously for 50,000 hours and be mounted in any direction. 40mm blower fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3、Ender-3 Pro、Ender-3S、Ender-3 v2、Ender-3 Max、Ender-5、Ender-5s、Ender-5 Pro、 Ender—5 Plus、Ender_6、CR-5 Pro H、CR-X、CR-X Pro、CR-6 SE、CR-6 Max、CR-30 (Installation Position for Noz…
SpecPicks Verdict
SpecPicks classifies GDSTIME 40mm x 10mm 4010 Blower Fan 24V Dual Ball Bearing, Ender 3 Up… as a solid pick with broad community endorsement in the PC & gaming hardware category, based on 69 verified Amazon reviews and our ranking model that weights rating × review-volume × price-fit. GDSTIME's positioning sits comfortably above the category median. Use the Compare tool to put it side-by-side with two or three close alternatives before clicking through to Amazon.
Common buyer scenarios for PC & gaming hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Pros & Cons
Pros
- ✓ Highly rated — 4.5★ average across customer reviews
- ✓ Backed by GDSTIME's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
Key Features
- Replace the old broken noisy stock blower fan on 3d printer: Ideal upgrade / replacement 40 mm blower fan for 3D printer (hot end or part cooling) and other 24V applications; Fit for Ender 3, Ender 3 v2, Ender 3 pro, Ender 3 V3 KE, Ender 3 Max Neo, Ender 5, Ender 5 Pro, Ender 6, CR-X, CR-6 SE, CR-30 and so on
- High Speed Blower: 40 mm small turbo blower fan is constructed of PBT material; Built-in high end pure copper coil dual ball bearings, this 3D printer part cooling fan can run continuously for 50,000 hours at high speeds without hassle or concern
- 3.3 FT Long Cable Wire: XH2.54 2Pin Connector with 1 meter (3.3 ft) cable wire for power supply; make sure positive (Red wire) and negative (Black wire) poles are in right place and match up to your 3d printer motherboard; Whether you want to replace a broken fan, improve overhang and bridging distances, or improve the airflow towards your parts, this 4010 blower fan upgrade is something that can get you there
- 4010 Blower Fan 24V Specs: Size: 40 x 40 x 10 mm (1.57 x 1.57 x 0.39 inches) | Hole to Hole Distance: 35 mm (1.38 inches) | Rated Voltage: 24V | Rated Current: 0.08 A | Power: 1.5 W | Speed: 9500 RPM | Noise: 35 dBA | Airflow: 3.62 CFM | Static Pressure: 0.68 In H2O
- Easy to Use: Includes 2Pcs DC 24V 40x40x10mm Blower Fans and 8pcs mounting screws and nuts; Highly speed with low power consumption for durable use; Startup Voltage: 3V; Opearating Voltage: 14 to 26V (If over 26v, it also can wirk, but will affects the fan life)
Full Specifications
| Brand | GDSTIME |
|---|---|
| Model | 2xGDB4010B24N95X2521M-US |
| Turbo | Yes |
| Voltage | 24 Volts |
| Wattage | 1.5 |
| Material | Plastic |
| Dimensions | 40 x 40 x 10 mm |
| Unit Count | 2.0 Count |
| Noise Level | 35 Decibels |
| Part Number | 2*GDB4010B24N95X2521M-US |
| Material Type | Plastic |
| Cooling Method | Air |
| Number of Items | 2 |
| Air Flow Capacity | 3.62 Cubic Feet Per Minute |
Ready to buy?
GDSTIME 40mm x 10mm 4010 Blower Fan 24V Dual Ball Bearing, Ender 3 Upgrade 24 Volt DC Brushless Hotend Part Cooling Fan 2 Pin with 3.3 FT Wires for Ender 3 V3 KE Ender 5 Pro CR-6 SE 3D Printer, 2-Pack is available on Amazon with Prime shipping and the full Amazon returns policy. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-05-12. Price and availability subject to change.