1" Square x 3/16" Height Rubber Feet for Electronics
Bottom line: The 1" Square x 3/16" Height Rubber Feet for Electronics is a specs-and-price decision rather than a crowd-consensus one in the retro cases & modding category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by Generic's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
1" Square × 3/16" Thick Black Silicone Rubber Feet provide reliable vibration isolation, non-slip support, and surface protection for electronics, audio equipment, computers, speakers, amplifiers, cabinets, and small appliances. The thick silicone construction distributes weight evenly while helping reduce vibration, noise, and surface wear. Each pad features a strong peel-and-stick acrylic adhesive for quick installation without screws or hardware. Simply clean the mounting surface before application and allow the adhesive to fully cure for maximum bond strength. Ideal for Hi-Fi audio…
SpecPicks Verdict
SpecPicks scored 1" Square x 3/16" Height Rubber Feet for Electronics using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cases & modding category. Generic's retro cases & modding lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cases & modding of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 1" × 1-1/2" × 3/16" Silicone Rubber Feet – Thick black silicone rubber feet with peel & stick acrylic adhesive for TVs, soundbars, stereo receivers, audio equipment, desktop computers, electronic enclosures, network equipment, and small appliances.
- Vibration Isolation – Helps reduce vibration, rattle, and unwanted movement while protecting desks, shelves, cabinets, and finished surfaces from scratches and wear.
- Strong Acrylic Adhesive – Peel-and-stick installation requires no screws or drilling. Bonds securely to clean, smooth surfaces after proper adhesive cure.
- Ideal for Electronics & Audio Equipment – Perfect for TVs, soundbars, stereo receivers, Hi-Fi amplifiers, speakers, desktop computers, network equipment, electronic enclosures, laboratory instruments, 3D printers, and small appliances.
- Durable Silicone Construction – Flexible silicone resists compression, cracking, and permanent deformation while maintaining reliable grip during long-term indoor use.
- Package Options – Available in multiple pack sizes for replacement equipment feet, cabinet bumpers, vibration isolation pads, equipment spacers, and surface protection.
Full Specifications
| Brand | Generic |
|---|---|
| Color | Black |
| Shape | Square |
| Material | Silicone Rubber |
| Unit Count | 12 Count |
| Fixture Type | Adhesive backed |
| Model Number | DC 12 |
| Material Type | Silicone Rubber |
| Number of Items | 12 |
| Number of Pieces | 12 |
| Vibration/Rumble | Yes |
| Additional Features | Anti-Scratch, Non-Slip, Peel & Stick, Surface Protection, Vibration Isolation |
| Included Components | 12 Rubber pads |
| Surface Recommendation | All hard surfaces including metal, wood, plastic, and composite equipment bases |
| Manufacturer Part Number | DC 13 |
| Recommended Uses For Product | Audio Equipment, Computers, Control Boxes, Electronic Enclosures, Electronics, Medical Equipment, Network Equipment, Soundbars, Speakers, Stereo Receivers, TVs |
| Item Dimensions L x W x Thickness | 1"L x 1"W x 0.18"Th |
| Full listing title | 1" Square x 3/16" Height Rubber Feet for Electronics, Audio Equipment, Laptops, Desktop Equipment, Game Consoles, Spacers, Bumpers, 12 Pack |
Ready to buy?
1" Square x 3/16" Height Rubber Feet for Electronics, Audio Equipment, Laptops, Desktop Equipment, Game Consoles, Spacers, Bumpers, 12 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Cases & Modding
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- AI Coding Agents Find the Right File but Miss the Lines — What Local Code Models on a 12GB GPU Get Wrong
- ComfyUI on an RTX 3060 12GB: Stable Diffusion & Flux Throughput in 2026
- Best Gaming Mouse for Office Productivity Crossover (2026)
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5070
- Stable Diffusion on Intel Arc vs RTX 3060 12GB: Which Budget GPU Renders Faster?
- Best Storage Upgrades for Older Gaming PCs in 2026
- Samsung Winds Down Chip Output Before Strike — Brace for SSD Prices
- Claude Fable 5 Tops the Intelligence Index: What Frontier Cloud AI Means for Local Rig Builders
- Why You Shouldn't Leave Model Selection on Default in Copilot, Gemini, and Other AI Tools
- Best Budget Gaming PC Build 2026: AMD Parts Guide
- The $500M Claude Bill: What Local LLM Inference Actually Costs
- Best Single-Board Computer Kits for Beginners (2026)
- Intel Arc Pro B60 Gaming Performance: 2025 Benchmarks
- Hailo-10H AI Accelerator on Raspberry Pi 5: Real Tok/s for On-Device LLMs
- Samsung's 2026 Odyssey Lineup Adds 5K, 6K and a 360Hz 4K QD-OLED
- Wired vs Bluetooth Headsets for Competitive FPS in 2026: The Latency Math
- Steam Deck OLED vs ROG Xbox Ally X: 2026 Comparison
- Best Mac for AI & LLM Workloads in 2026
- BENGOO G9000 vs Turtle Beach Recon 50: Best Sub-$40 Wired Headset
- Best $1000 Gaming PC Build for 2026: Parts We'd Actually Buy
- Best Mechanical Keyboard for Office and Hybrid Work in 2026
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- Voodoo3 3000 PCI No-Display Troubleshooting on Windows 98 SE (2026)
- Bridging Retro Audio: Sound Blaster Legacy to a Modern Sound BlasterX G6
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090