Intel Copper Core Socket 478 Heat Sink and Fan up to 3.4GHz
As an Amazon Associate, SpecPicks earns from qualifying purchases.
*Price sourced from Amazon.com. Last updated 2026-04-19. Price and availability subject to change.
Bottom line: The Intel Copper Core Socket 478 Heat Sink and Fan up to 3.4GHz is a specs-and-price decision rather than a crowd-consensus one in the retro cpus category, priced around $69.99. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.
Maximum Cooling Protection! This Intel C33218-003 Heat Sink and Fan delivers the cooling performance your CPU needs! It features an aluminum heat sink with copper core and a 2.5-inch fan! It supports Intel Pentium 4 Socket 478 CPU's up to 3.4 GHz! Don't let sluggish performance or malfunction put an end to any computing tasks! Keep it cool with this Intel C33218-003 Heat Sink and Fan ! Upgrade today!
SpecPicks Verdict
SpecPicks scored Intel Copper Core Socket 478 Heat Sink and Fan up to 3.4GHz using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the retro cpus category. Compare with similarly-priced alternatives in the retro cpus category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpus of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Pros & Cons
Pros
- ✓ Supports Intel Pentium 4 Socket 478 CPU up to 3.4 GHz
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
Key Features
- Intel Socket 478 Heat Sink and Fan General Features: Copper core Aluminum heat sink 2.5-inch fan
- Supports Intel Pentium 4 Socket 478 CPU up to 3.4 GHz
- 3-pin fan connector (approximately 9-inch cord length) Regulatory Approvals: CE UL
Ready to buy?
Intel Copper Core Socket 478 Heat Sink and Fan up to 3.4GHz is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-04-19. Price and availability subject to change.
Related Retro CPUs
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Single-Board Computer Project Kits for Beginners (2026)
- Best Retro Gaming Console to Buy in 2026
- Logitech G502 Hero vs SteelSeries QcK: Building a Competitive FPS Loadout in 2026
- Best 4K Monitor Under $300 for RTX 3060 12GB Gaming in 2026
- Raspberry Pi 5 Secondary Monitor Setup Guide (2025)
- Pi Pico Puts Bluetooth Keyboards on the I2C Bus
- Best Gaming Mouse Pads for FPS and MOBA in 2026
- Best SSD for a Retro PC Build: CompactFlash vs SATA in 2026
- Samsung Winds Down Chip Output Before Strike — Brace for SSD Prices
- GPT-5.6 Sol matches Fable 5 near one-third the cost
- Best Controller for Fighting Games on PC in 2026: HORI HORIPAD vs 8BitDo Pro 2 vs DualSense
- DIY Steam Controller Puck Adds Xbox, Switch and PS Emulation Modes
- Cerebras Says It's Running GPT-5.5 Internally — What It Means for Local LLM Boxes
- Best GPU for Stable Diffusion and Local Image Generation in 2026
- Moonshot Pauses Kimi K3 Signups After GPU Demand Maxes Out
- Best Gaming CPUs for 2026: Why the Ryzen 7 9800X3D Leads the Pack
- Best Raspberry Pi Alternative for Klipper (2025 Guide)
- Running Windows XP Off a 2.5-inch SATA SSD via an IDE Adapter (2026 Guide)
- AMD EXPO Ultra-Low Latency BIOS Updates: 600-Series Guide
- Host a Quake 3 + UT99 LAN Server on a Raspberry Pi 4 in 2026
- Anthropic Extends Free Fable 5 as GPT-5.6 Sol Heats Pricing War
- How Much VRAM Does 32k Context Use on an RTX 3060 12GB? (2026)
- GameSir G7 SE vs DualSense: Best Controller for PC
- Best SSD for a Retro PC Build: SATA, CompactFlash, or IDE Bridge?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090