ErGear Fully Adjustable Dual Monitor Mount for 2 Screens up to 32 Inches
Bottom line: The ErGear Fully Adjustable Dual Monitor Mount: Fits monitors 13 to 32 inches on both arms; main trade-off: 17.6 lb per-arm cap rules out heavier 32-inch panels.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Fits monitors 13 to 32 inches on both arms
- ✓ Each arm rated for 17.6 lbs
- ✓ Plus or minus 90 degree swivel and 360 degree rotation
- ✓ Works with 75x75 mm and 100x100 mm VESA patterns
- ✓ C-clamp and grommet mounting both included in the box
Cons
- ✗ 17.6 lb per-arm cap rules out heavier 32-inch panels
- ✗ Manufacturer recommends wooden desks only
- ✗ Grommet option needs a desk 2.36 inches thick or less
- ✗ No VESA holes on your monitor means no fit, no adapter included
Manufacturer description
The ErGear dual monitor mount holds two screens from 13 to 32 inches on a single desk base, with a 30.71-inch arm span and a 16-inch high bar that gives each panel room to sit side by side without crowding. Each arm supports up to 17.6 lbs, and both VESA patterns you are likely to have on a modern monitor, 75x75 mm and 100x100 mm, bolt straight on. Positioning is where this ErGear stand earns its keep: plus or minus 90 degrees of swivel, plus or minus 45 degrees of tilt, and full 360-degree rotation let you pivot one screen vertical for code or documents while keeping the other in landscape…
SpecPicks Verdict
SpecPicks scored ErGear Fully Adjustable Dual Monitor Mount using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. ErGear's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this fit two 32-inch monitors?
Yes. The arm span is 30.71 inches wide with a 16-inch high bar, sized for two 32-inch screens, as long as each monitor weighs 17.6 lbs or less and has VESA holes.
What VESA sizes does the ErGear mount support?
It supports 75x75 mm and 100x100 mm VESA hole patterns. If the back of your monitor has no VESA holes, this mount will not attach.
Can I rotate a monitor to portrait mode?
Yes. Each arm offers 360-degree rotation, plus or minus 90-degree swivel, and plus or minus 45-degree tilt, so you can run one screen vertical and the other horizontal.
How thick can my desk be?
The C-clamp fits desks 0.39 to 3 inches thick; the grommet mount fits 0.39 to 2.36 inches. ErGear recommends wooden desks, with no beams or panels underneath that would block the clamp.
Key Features
- Computer Compatibility - To ensure compatibility of the dual monitor mount, each of your monitors must meet three conditions: Firstly, screen size range: 13 to 32 inches. Secondly, screen weight limit: 17.6lbs. Thirdly, there must be VESA mounting holes on the back of the monitor screen that are spaced 75x75 mm or 100x100 mm apart. Please make sure that your monitor meets all of the above conditions before purchasing, if you are still unsure, you can seek help from customer service.
- Versatile Compatibility - With a 30.71“ wide arm span and 16” high bar, this dual monitor arm accommodates two 32” monitors, providing a very large amount of adjustability for your work use and allowing you to enjoy an immersive viewing experience.
- Flexible Screen Positioning - Experience ultimate flexibility with our dual monitor stand that features +/-90° swivel, +/-45° tilt, and 360° rotation. Easily adjust monitor angle for ergonomic viewing to avoid neck and eye strain. Achieve optimal comfort with customizable screen positioning, perfect for your office desk, gaming setup, or multitasking workspace.
- Free Up Desk Space - Elevate your monitors closer to eye level with our dual monitor desk mount, freeing up valuable desk space for laptops, keyboards, speakers, or other devices. Integrated cable management clips allow you to route cables for a clean look that maximizes efficiency and focus.
- Two Installation Options - With a detailed instruction manual and labeled hardware, the ErGear monitor mount is a breeze to set up. For the sake of using experience, please check if your table meets the following three conditions: Material first, we only recommend wooden table. Secondly, The bottom of the table should preferably be free of any beams or panels that may interfere with installation. Table thickness thirdly,'C' clamp fits 0.39"-3" while grommet mount fits 0.39"-2.36".
Full Specifications
| Brand | ErGear |
|---|---|
| Color | White |
| Material | Alloy Steel |
| Model Number | EGCM1W |
| Mounting Type | Tabletop Mount |
| Movement Type | tilt,swivel,ratation,articulating |
| Number of Items | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Alloy Steel |
| Maximum-Supported Screen Size | 32 inches |
| Minimum-Supported Screen Size | 13 inches |
| Full listing title | ErGear Fully Adjustable Dual Monitor Mount for 2 Screens up to 32 Inches, Holds up to 17.6 lbs Each Arm, Desk Stand, White |
Ready to buy?
ErGear Fully Adjustable Dual Monitor Mount for 2 Screens up to 32 Inches, Holds up to 17.6 lbs Each Arm, Desk Stand, White is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- AI-Driven Driver Install on WinXP: Vision LLM Walks the Audigy FX Setup
- Imaging Vintage IDE Drives in 2026: A CompactFlash + USB Adapter Workflow
- ASUS ROG Crosshair 2006 X870E: A Retro-Styled AM5 Mobo for ROG's 20th Anniversary
- Best Retro Mini Console & Handheld in 2026
- Plug-and-Play Retro Consoles Compared: Genesis Mini vs SNES vs NES Classic
- Jan vs LM Studio: The Best No-Terminal Local LLM App for an RTX 3060 (2026)
- Sega Genesis Mini vs SNES Classic: The Definitive 2026 Plug-and-Play Retro Showdown
- Claude Code Artifacts Just Shipped: What It Adds, and the Local Aider Alternative
- Qwen MTP on LLaMA.cpp + TurboQuant: What's Actually Verified
- Homebrew Hardware Mod Gives the NES a Graphics Upgrade
- AI-Driven Win98 Voodoo Driver Install: A Repeatable Vision-LLM Playbook for the Sound Blaster Audigy FX
- RTX 3060 12GB vs Ryzen 5 5600G iGPU for Entry Local LLM Inference
- GameSir G7 SE vs DualSense vs 8BitDo Pro 2 for PC Gaming in 2026
- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026: Setup and Real Transcode Limits
- Xbox Cloud Gaming in 2025: How It Works & What You Need
- CompactFlash as Your IDE Hard Drive: A Silent, Reliable Retro PC Boot Disk
- GPT-5.6 Deleted a User's Files: Why Local, Sandboxed Agents Matter
- Ryzen 9 9950X3D vs Core Ultra 9 285K
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- OpenAI Codex 'Watch Once, Repeat Forever': What It Means for Local Coding Rigs
- Prime Big Deal Days 2026 Desk Deals: 5 L-Shaped and Standing Desks for a Tower + Multi-Monitor Setup
- Build a RetroPie Handheld with the Raspberry Pi Zero W in 2026: Full BOM + Setup
- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- Forza Horizon 6 Boots in 4 Seconds with Advanced Shader Delivery
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090