Small Pulley Block 1" Mini Duplex Pulley Roller Frictionless Silent Wheel Heavy Duty Fixed Sheave Loading 176 lb for Rope Cable Cord Guide & Wall Ceiling Mount DIY Project - 2 Pack
Bottom line: The Small Pulley Block 1" Mini Duplex Pulley Roller Frictionless Silent ($7.98 on Amazon as of 2026-10-08): 176 lb rated load in a 1-inch sheave that spans just 2.4 in wide; main trade-off: fixed sheave only - no swivel, so rope angle is locked by mount orientation.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-08. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 176 lb rated load in a 1-inch sheave that spans just 2.4 in wide
- ✓ Chrome-plated iron sheave with nickel-plated carbon steel frame resists corrosion
- ✓ 2 pulleys per pack, so you can rig a two-point run without a second order
- ✓ Includes 4 expansion tubes and 4 self-tapping screws - no separate hardware run
- ✓ Accepts rope up to 0.236 in (6 mm) - covers most paracord and clothesline gauges
Cons
- ✗ Fixed sheave only - no swivel, so rope angle is locked by mount orientation
- ✗ Requires an 8mm masonry bit you supply for the wall install
- ✗ Dimensions measured manually with 1-3mm tolerance per dojobkinb
- ✗ 1-inch sheave is too small for thick 8mm+ climbing or rigging rope
SpecPicks Verdict
SpecPicks scored Small Pulley Block 1" Mini Duplex Pulley Roller Frictionless Silent… using a rating × review-volume × price-fit model applied to published specs and reviews across the vr headsets & accessories category. dojobkinb's vr headsets & accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for vr headsets & accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Specifications & Weight Capacity】 Pulley Total Height: 3.4 cm/1.3 inch; Pulley Total Width: 6.1 cm/2.4 inch. Sheave Diameter: 2.5 cm/1.0 inch; Maximum rope diameter: 0.6 cm/0.236 inch; Weight Capacity: 176 lb. Screw Length: 3 cm/1.18 inch
- 【Quality Small Pulley Block 】 The small lifting pulley is made of iron with chrome plated surface, high strength and stability, which can ensure long lasting performance
- 【Wide Application】 This rope pulley is widely applied to the industry and household for material handling and moving, which is a useful DIY attachment for home gym, wood shed, sun shade sails, material handling and so on
- 【Easy installation】 Equipped with screws and expansion pipes, the wall mounted pulley is simple to install. First, make the location of the mounting holes with a pen. Next, use 8mm drill bit to drill two holes in the wall. Then, insert the expansion tubes into the holes. Finally, fix the pulley block with the screws and finish
- 【What You Get】 You will get 2 packs of Pulley Block, which are made of quality carbon steel and nickel plated on surface . Also equipped with 4 pcs applicable expansion pipes and 4 pcs corrosion resistant self-tapping screws. All dimensions are measured manually, please allow 1-3mm differences
Full Specifications
| Brand | dojobkinb |
|---|---|
| Weight | 176 lb |
| Package Dimensions | 3.35 x 3.35 x 1.22 inches |
Ready to buy?
Small Pulley Block 1" Mini Duplex Pulley Roller Frictionless Silent Wheel Heavy Duty Fixed Sheave Loading 176 lb for Rope Cable Cord Guide & Wall Ceiling Mount DIY Project - 2 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-08. Price and availability subject to change.
Related VR Headsets & Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Samsung 870 EVO vs Crucial BX500: Best SATA SSD 2026
- Pentium II/III LAN Party Build Brand Profile: Why Creative and 3dfx Defined the Era
- Best Webcam for PC Game Streaming Under $100 (2026)
- Is Your First Homelab Right? A 2026 Hardware Sanity Check on a Ryzen 5 5600G
- Best Game Controller in 2026: 5 Picks for PC, Console and Retro
- GLM-5.2 Local: What GPU Actually Runs the Top Open-Weights LLM
- SteamOS Boots on Intel Hardware in Community Hack
- Best Budget GPU for CNN and Image-Model Training in 2026: The RTX 3060 12GB Deep Dive
- Best Game Controller for Couch & Big-Screen PC Gaming in 2026
- Building a Silent Pentium III Windows 98 Gaming Rig in 2026
- 21 GPU's benchmarked running a small TTS model (vram peak: 5GB)
- SteamOS Boots on Intel Hardware After Community Port
- vLLM vs llama.cpp for Single-User Local Chat on a 12GB GPU
- Best First Upgrades for a Prebuilt Gaming PC in 2026
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 3090
- Radxa Rock 5B+ Review (2026): The Enthusiast's RK3588 Board
- MAYFLASH F300 vs GameSir G7 SE: Best Controller for PC Fighting Games (2026)
- Best SATA SSD for a PS4 Slim and Emulation Box in 2026
- Ryzen 7 5700X + RTX 3060 12GB: The Best Value 1080p Combo in 2026
- Best CPU for AI Inference Workstations in 2026
- Best CPU for the RTX 3060 12GB (No Bottleneck) in 2026
- Set Up a Local LLM Coding Assistant in VS Code on an RTX 3060 12GB (2026)
- Best AM4 Upgrade Parts Under $100 Each in 2026
- Build a Budget Local-LLM Workstation Under $1,500: Ryzen 7 5800X + RTX 3060 12GB Benchmarks
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090