Putilsen Mount 2-in-1 Laptop Wall Mount with Detachable Tray
Bottom line: The Putilsen Mount 2-in-1 Laptop Wall Mount with Detachable Tray ($34.39 on Amazon as of 2026-10-06): Gas spring arm holds 2.2-19.8 lbs, spanning ultrabooks to 19 lb monitors; main trade-off: wall studs required; no desk-clamp or freestanding option included.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Gas spring arm holds 2.2-19.8 lbs, spanning ultrabooks to 19 lb monitors
- ✓ Tray widens 276-472 mm for 12-17 inch laptops
- ✓ 250 mm height range plus -90/+90 degree rotation
- ✓ VESA 75x75 and 100x100 pattern doubles it as a monitor mount
- ✓ Vented platform and padded corners protect finish and airflow
Cons
- ✗ Wall studs required; no desk-clamp or freestanding option included
- ✗ Drilling makes repositioning costly versus a clamp-on arm
- ✗ Under-2.2 lb laptops may not load the spring enough to stay put
- ✗ Cable channel runs on the arm only, not to the wall outlet
SpecPicks Verdict
SpecPicks scored Putilsen Mount 2-in-1 Laptop Wall Mount with Detachable Tray using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Putilsen Mount's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Fits 12-17-inch notebook or 17-32 inch screens: Putilsen Mount premium laptop holder width of the platform can be adjusted from 276-472 mm and the load 2-9 kg for better adjustment and fixing of the notebook. Can also be used as a display wall mount monitor, VESA 75 x 75/100 x 100 mm.
- Fully adjustable: this laptop stand can rotate left and right -90/+90.250 mm height adjustment range, you can always rotate your computer to the most comfortable angle, a better viewing angle helps maintain the correct posture of the neck and back.
- Prevent scratches: the 4 corners of this platform and the side contact points with the laptop are equipped with pads that can hold the laptop firmly in place while avoiding scratches after contact with the surface of the laptop.
- Easy cable management: the concealed cable management system helps you to organise the cables neatly on the hanging arm for an aesthetically pleasing office environment.
- Ventilated cooling platform: the ventilation holes in the middle of the platform contribute to heat dissipation when your notebook runs at high speed.
Full Specifications
| Brand | Putilsen Mount |
|---|---|
| Color | Black |
| Weight | 9 kg |
| Material | Alloy Steel |
| Unit Count | 1.0 Count |
| Model Number | cdcdde57-c76b-4a6f-833b-f2c5647cdd1a |
| Mounting Type | Wall Mount |
| Movement Type | Articulating |
| Number of Items | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Alloy Steel |
| Maximum Tilt Angle | 90 Degrees |
| Warranty Description | 10 years |
| Easy cable management | the concealed cable management system helps you to organise the cables neatly on the hanging arm for an aesthetically pleasing office environment. |
| Ventilated cooling platform | the ventilation holes in the middle of the platform contribute to heat dissipation when your notebook runs at high speed. |
| Maximum-Supported Screen Size | 32 Inches |
| Minimum-Supported Screen Size | 17 Inches |
| Full listing title | 2-in-1 Laptop Wall Mount with Detachable Tray | Gas Spring Adjustable Arm for 12-17 Inch Laptops & Monitors | Full Motion Articulating Stand | Holds 2.2-19.8 lbs (Black) |
Ready to buy?
2-in-1 Laptop Wall Mount with Detachable Tray | Gas Spring Adjustable Arm for 12-17 Inch Laptops & Monitors | Full Motion Articulating Stand | Holds 2.2-19.8 lbs (Black) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- AI-Driven Sound Blaster Driver Install on WinXP via Vision LLM
- Best GPU for AI code generation in 2026
- Grok Imagine Hits #5: Can a $300 RTX 3060 Run Local Image AI?
- GeForce 4 Ti 4600 vs GeForce FX 5900: The Last Great AGP Cards Compared (2026)
- OpenAI and Broadcom Unveil 'Jalapeño' Inference Chip
- GLM-5.2's 37k-Token Reasoning Outputs and What They Mean for Local Rigs
- Asus ROG Xreal R1: 240Hz AR gaming glasses land
- Best SATA SSD for Gaming and Console Upgrades in 2026
- NVIDIA Cosmos 3 vs Ideogram 4.0: Which Open Image Model to Run on 12GB
- UT99 OldUnreal 469 Patch in 2026: Migration, Servers, and Period-Correct Controller Mapping
- CompactFlash as a Win98 Boot Drive: Transcend CF133 + IDE Adapter Walkthrough
- Open-WebUI + Ollama on RTX 3060 12 GB: A 2026 Self-Hosted Stack
- Raspberry Pi 5 IOMMU Support Lands in Mainline Linux: What It Means
- How to run Qwen 3 14B on Arc B580
- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Streaming + Gaming CPU in 2026
- Best Gaming SSD in 2026: 5 Picks for PS5, Steam Deck, and Custom Builds
- Gemini API Adds MCP + Background Execution: Build a Local Agent Host
- Best Mac for running local LLMs in 2026
- GeForce 3 Ti 500 vs Radeon 8500: The 2001 DirectX 8 GPU Showdown
- Best Local LLM for Coding Agents on a 24GB GPU (Late 2026)
- Best GPU for Forza Horizon 6 at 1080p & 1440p in 2026
- Best Controller for Fighting Games on PC in 2026
- ESP32-S3 vs RP2350 vs Nordic nRF54L15: Which MCU for On-Device AI in 2026?
- Rescue a Dying Vintage IDE Drive: Imaging Retro Disks with a USB-to-IDE Adapter
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090