Skip to main content
C2G/Cables to Go 31381 Cat6 Snagless Unshielded (UTP) Network Crossover Ethernet Cable, Red (5 Feet/1.52 Meters)
C2G

C2G/Cables to Go 31381 Cat6 Snagless Unshielded (UTP) Network Crossover Ethernet Cable

Bottom line: The C2G/Cables to Go 31381 Cat6 Snagless Unshielded: Crossover pinout links two PCs peer-to-peer with no hub or switch needed; main trade-off: crossover wiring is redundant on modern auto-MDI-X ports, limiting its use cases.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Crossover pinout links two PCs peer-to-peer with no hub or switch needed
  • ✓ Cat6 copper braid rated for 10 Gigabit transmission on 10GBase-T gear
  • ✓ Snagless molded boot protects the RJ45 clip during frequent re-patching
  • ✓ Tested to ANSI/TIA 568 C.2 Cat6 component spec, not just generic Cat6 claims

Cons

  • ✗ Crossover wiring is redundant on modern auto-MDI-X ports, limiting its use cases
  • ✗ 5 feet (1.52 m) only, too short for anything beyond a bench or rack run
  • ✗ Unshielded UTP offers no foil protection near motors, drives, or power runs
  • ✗ Red jacket is the only color listed here, so color-coding schemes may not match

Manufacturer description

This Cat6 network crossover patch cable is an ideal solution for connecting two computer to share files or data. The crossed pin configuration allows two computers to be connected peer-to-peer without the need for a hub or switch. This cable may also be used to connect network switches and hubs without an uplink port to other switches and hubs. Each cable is fully tested, quality inspected, and meets all TIA/EIA Cat6 standards. This cable has been designed tor educe both impedance and structural return loss (SRL) which ensures error-free transmission. Constructed from high quality cable and…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for C2G/Cables to Go 31381 Cat6 Snagless Unshielded (UTP) Network…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. On the listing's own facts, the case for it is "Crossover pinout links two PCs peer-to-peer with no hub or switch needed"; the main trade-off is "Crossover wiring is redundant on modern auto-MDI-X ports, limiting its use cases". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Cat6 Crossover Patch Cable - One (1) Red 5 Foot Crossover Ethernet Cable with RJ45 Male Connector
  • Use - This snagless unshielded cat6 patch cable will easily transfer files and data between two computers by using this cable to connect and create a peer-to-peer network
  • Durable - With a copper braid and PVC jacket, this patch cable is designed to support 10 Gigabit data transmission from 10GBase-T ports and equipment, like network adapters, hubs, switches, and more
  • High Quality - Each snagless UTP ethernet cable is fully tested to meet ANSI/TIA 568 C.2 Cat6 component requirements, and each is bonded together to help maintain the twist-spacing throughout the line right up to the termination point
  • Cables 2 Go Brand - Since 1984, C2G has provided connectivity solutions for a variety of markets, including corporate, education, healthcare, home theater, digital signage, hospitality, and more, joining Legrand in 2014

Full Specifications

BrandC2G
ColorRed
Model31381
Weight2g
Frequency250 MHz
Cable TypeEthernet
Item ShapeRound
Model Name5ft Cat6 550MHz Snagless Crossover Cable
Unit Count1 Count
Item Length5 feet
Part Number31381
Connector TypeRJ45
Number of Pins8
Outer MaterialPolyvinyl Chloride (PVC)
Maximum Current1 A
Maximum Voltage10 volts
Number of Items1
Special FeatureHigh Speed
Connector GenderMale-to-Male
Specification MetUL
Full listing titleC2G/Cables to Go 31381 Cat6 Snagless Unshielded (UTP) Network Crossover Ethernet Cable, Red (5 Feet/1.52 Meters)

Ready to buy?

C2G/Cables to Go 31381 Cat6 Snagless Unshielded (UTP) Network Crossover Ethernet Cable, Red (5 Feet/1.52 Meters) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →