NEIKO

NEIKO 01407A Electronic Digital Caliper Measuring Tool, 0 - 6 Inches Stainless Steel Construction with Large LCD Screen Quick Change Button for Inch Fraction Millimeter Conversions, Digital Caliper Measuring Tool

Name: NEIKO 01407A Electronic Digital Caliper Measuring Tool, 0 - 6 Inches Stainless Steel Construction with Large LCD Screen Quick Change Button for Inch
Brand: NEIKO
SKU: B000GSLKIW
Price: 25.39 USD
Availability: InStock

By Mike Perry, Hardware Editor · Verified 2026-09-13

Mike Perry has researched PC hardware since 2014, tracking 80+ GPU generations, 50+ retro handheld platforms, and 30+ vintage PC configurations. He synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. View full credentials →

$25.39

As an Amazon Associate, SpecPicks earns from qualifying purchases.

🛒 See live eBay price Also on Amazon — View Current Price → Compare to similar retro cpus

*Price sourced from Amazon.com. Last updated 2026-08-17. Price and availability subject to change.

Bottom line: The NEIKO 01407A Electronic Digital Caliper Measuring Tool, 0 - 6 Inches Stainless Steel Construction with Large LCD Screen Quick Change Button for Inch Fraction Millimeter Conversions, Digital Caliper Measuring Tool is a specs-and-price decision rather than a crowd-consensus one in the retro cpus category, priced around $25.39. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.

The NEIKO 01407A digital caliper covers the 0-6 inch (0-150 mm) range with a resolution of 0.0005 inch, 1/128 inch, or 0.01 mm, and a stated accuracy of 0.001 inch (0.02 mm). That fractional readout is the reason this model shows up in retro PC and workshop toolkits so often: a quick-change button cycles inch, fraction, and millimeter modes mid-measurement, so you are not converting drive bay widths, standoff heights, or heatsink clearances in your head. The body is polished stainless steel with a knurled thumb roller and a locking screw, so the jaws stay put once you set them. Two sets of…

SpecPicks Verdict

SpecPicks scored NEIKO 01407A Electronic Digital Caliper Measuring Tool, 0 - 6 Inches… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the retro cpus category. NEIKO's retro cpus lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for retro cpus of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.

Frequently Asked Questions

What is the measuring range of the NEIKO 01407A?

It measures 0 to 6 inches, or 0 to 150 mm, covering inside, outside, depth, and step measurements.

How accurate is this digital caliper?

NEIKO lists a resolution of 0.0005 inch, 1/128 inch, or 0.01 mm and an accuracy of 0.001 inch (0.02 mm). It ships factory calibrated.

Can it display fractions instead of decimals?

Yes. The quick-change button cycles between inch, fraction, and millimeter modes, with fractional readings down to 1/128 inch.

Is a case included?

Yes, each caliper comes with a gray portable storage case that NEIKO describes as pressure resistant and shockproof.

Is it durable enough for garage or worksite use?

The body is polished stainless steel with a knurled thumb roller and locking screw, and NEIKO rates it splash and dust resistant. It holds a 4.5/5 rating from 19,276 reviewers.

Pros & Cons

Pros

✓ Backed by NEIKO's warranty and support channels
✓ Ships via Amazon with Prime eligibility and the standard returns policy

Cons

✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified

Key Features

MULTI-FUNCTION: This measuring tool has a quick-change button that changes between three measuring modes such as inch, fraction, and millimeter to make conversion a snap during measurement. Our metric caliper measuring tool is splash and dust resistant.
THREE UNIT CONVERSION: The electronic digital caliper micrometer measurement range is 0” - 6” and 0 mm – 150 mm with a resolution of 0.0005” / 1/128” / 0.01 mm and an accuracy of 0.001” / 0.02 mm for precise readings in all your measurement needs.
QUALITY: The body of the digital caliper is constructed using finely polished stainless steel with a knurled thumb roller and locking screw that ensures smooth sliding and accurate positioning when taking measurements. The large digital caliper screen makes it easy to get quick and accurate readings.
VERSATILE: The Neiko 01407A electronic digital caliper measurement tool is perfect to measure inside, outside, depth and step with two sets of jaws and a probe as a vernier caliper.
EXTRA LARGE LCD SCREEN: Each digital stainless-steel caliper has an extra-large LCD screen for easy and clear readings for faster efficiency and accuracy for all jobs. Each digital caliper comes with a gray portable strong case for easy storage, pressure resistant and shockproof.

Full Specifications

Brand	NEIKO
Model	01407A
Range	1.5E+2
Material	Stainless Steel
Unit Count	1.0 Count
Part Number	01407A
Material Type	Stainless Steel
Item Type Name	Electronic Digital Caliper \| 0 - 6 Inches \| Stainless Steel Construction with Large LCD Screen \| Quick Change Button for Inch/Fraction/Millimeter Conversions
Included Components	Case
Number of Batteries	1 LR44 batteries required. (included)
Measurement Accuracy	0.001” / 0.02 mm
Item Dimensions L x W	6"L x 1"W
Manufacturer Contact Information	GARDENA, CA, 90248 US

Ready to buy?

NEIKO 01407A Electronic Digital Caliper Measuring Tool, 0 - 6 Inches Stainless Steel Construction with Large LCD Screen Quick Change Button for Inch Fraction Millimeter Conversions, Digital Caliper Measuring Tool is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

See live eBay listings →

*Price sourced from Amazon.com. Last updated 2026-08-17. Price and availability subject to change.