LINDY 1 Port Low Profile Parallel Card PCIe (51246)
Bottom line: The LINDY 1 Port Low Profile Parallel Card PCIe is a specs-and-price decision rather than a crowd-consensus one in the expansion cards category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Card Connector: 44 Way D Female
- ✓ Backed by Lindy's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Low profile PCIe ,Speed: Up to 1.5Mbps,Built-in 32 byte hardware FIFO,SPP/EPP/ECP compatible,IEEE 1284 standard,Supports PCIe Base Specification Rev 1.1,Supports x1, x2, x8, x16 (lane) PCIe Bus connector keys,Card Connector: 25 Way D Female ,Software Compatibility: Windows 2000/ME/XP/Vista/Windows 7/Server 2003, 2008, Linux Kernel 2.6.x,Chipset: Oxford OXPCIe840,2 Year warranty ,
SpecPicks Verdict
SpecPicks scored LINDY 1 Port Low Profile Parallel Card PCIe using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. Lindy's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service. The finger contacts are gold-plated to limit oxidization and extend the life of the card. Bus Type: 32 Bit PCI
- Card Connector: 44 Way D Female
- Adapter Cable: 44 Way D Male to 2 x 9 Way D Male + 25 Way D Female
- Software Compatibility: DOS, Windows 98SE/ME/NT/2000/XP/Server 2003/Vista, Linux
- 3 Year Warranty
Full Specifications
| Brand | Lindy |
|---|---|
| Style | Classic |
| Style Name | Classic |
| Model Number | 51246 |
| Adapter Cable | 44 Way D Male to 2 x 9 Way D Male + 25 Way D Female |
| Compatibility | Linux |
| Card Connector | 44 Way D Female |
| Mfr Part Number | 51246 |
| Hardware Interface | IEEE 1284, PCI |
| Software Compatibility | DOS, Windows 98SE/ME/NT/2000/XP/Server 2003/Vista, Linux |
| Global Trade Identification Number | 04002888512466 |
Ready to buy?
LINDY 1 Port Low Profile Parallel Card PCIe (51246) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- GameSir G7 SE vs DualSense for PC Gaming: Which Controller Wins?
- Cloning a Win98 Voodoo3 Boot Drive: SATA-IDE Adapter Workflow
- Amstrad CPC Emulator Now Runs on the Raspberry Pi Pico 2
- Building a Period-Correct 2003 LAN Party Rig with Athlon XP and Audigy 2 ZS
- Pentium II/III LAN Party Build Brand Profile: Why Creative and 3dfx Defined the Era
- KOORUI 27" 4K vs Samsung Odyssey 27" 4K for PS5 and PC Gaming
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- Sound Blaster X G6 on a Win98 + Voodoo3 Build: Period-Correct Audio That Beats On-Board
- Raspberry Pi 4 8GB as a Jellyfin Media Server: Real Limits
- Best Fighting Game Controller and Arcade Stick for PC in 2026
- vLLM on an RTX 3060 12GB: Is It Worth It for Single-User Chat?
- Build a Home NAS on a Raspberry Pi 4 8GB in 2026
- Meta's AI Bill Hits Billions: The Case for Local Inference on a $300 GPU
- IPEX-LLM + Ollama vs a CUDA RTX 3060 Rig
- Is the RTX 3060 12GB Still the Best Budget 1080p GPU in 2026?
- SATA/IDE to USB Adapters in 2026: FIDECO vs Unitek vs Vantec for Retro PC Data Recovery
- Sound Blaster Audigy FX in a Period-Correct WinXP Build: 2026 Install and Tuning Guide
- Run a Local LLM on a Raspberry Pi 4 (8GB) in 2026: What Actually Works and How Slow It Is
- Best Sim Racing Wheel for Beginners on PS5 & PC (2026)
- Running a Local Coding Agent on a Small Model: What Actually Breaks (and How to Fix It)
- Raspberry Pi AI HAT+ 2025: TOPS, Price, Setup Guide
- Imaging Your Big-Box CD-ROM Collection: A CompactFlash + IDE Workflow
- Motherboard Sales Fell 33% in 2026: Is DIY PC Building Dying?
- Qwen 3.6 27B vs Mistral 3.5 Medium: Local Hardware Showdown for 24GB GPUs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090