Suptek Dual LED LCD Monitor Stand up Free-Standing Desk Mount
Bottom line: The Suptek Dual LED LCD Monitor Stand up Free-Standing Desk Mount ($35.99 on Amazon as of 2026-10-07): Extra-tall 31.5 in pole leaves real room for a stacked vertical two-monitor array; main trade-off: 22 lb per-arm ceiling rules out heavier 32 in panels and most ultrawides.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Extra-tall 31.5 in pole leaves real room for a stacked vertical two-monitor array
- ✓ Free-standing weighted base means no desk clamp, no grommet hole, no drilling
- ✓ Fits both 75x75mm and 100x100mm VESA patterns on screens up to 32 inches
- ✓ Full 360-degree rotation lets either screen flip to portrait for code or documents
Cons
- ✗ 22 lb per-arm ceiling rules out heavier 32 in panels and most ultrawides
- ✗ Free-standing base occupies desk depth that a clamp mount would leave open
- ✗ Tilt and swivel cap at plus or minus 45 degrees, less than premium gas-spring arms
- ✗ Height sets by sliding along the pole, not spring-assisted one-hand adjustment
Manufacturer description
The Suptek ML6802 is a free-standing dual monitor stand built for people who want a vertical two-screen array without drilling or clamping anything to the desk. Its 31.5-inch extra-tall center pole gives you real stacking room, and the weighted free-standing base means you can reposition the whole rig mid-project instead of re-mounting hardware. Each arm handles screens up to 32 inches and 22 pounds, with standard 75x75mm or 100x100mm VESA hole patterns covering most panels you already own. Height adjusts along the pole, so you can set one display at eye level and park the second above or…
SpecPicks Verdict
SpecPicks scored Suptek Dual LED LCD Monitor Stand up Free-Standing Desk Mount using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. suptek's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this hold two 32-inch monitors?
Yes, as long as each screen weighs 22 lbs or less. The ML6802 is rated for screens up to 32 inches per arm, so check your monitor's listed weight before ordering.
Do I have to clamp it to my desk or drill a hole?
No. This is a free-standing stand with a weighted base, so it just sits on the desk surface and can be picked up and moved to another spot without tools.
What VESA patterns does it support?
The mounting plates fit 75x75mm and 100x100mm backside hole patterns, which covers most consumer monitors. Panels with no VESA holes will need a separate adapter.
Can I mount the monitors vertically, one above the other?
Yes. The 31.5-inch extra-tall center pole is built for a vertical array, and both mounts adjust in height independently along the pole.
Is it hard to assemble?
It ships with a step-by-step user manual and a sorted hardware kit. Assembly guidance is called out in the product's listed features.
Key Features
- Compatibility - Dual monitor mount ideal for most screens up to 32" and 22lbs each with 75x75mm or 100x100mm backside mounting holes.
- Aticulation - Rotate 360°, tilt ±45° up and down, swivel ±45° left and right, extra tall height adjustment along the center pole.
- Free standing Stand - Free standing base let you easily move your monitors to anywhere.
- Integrated cable management - Keeps your desk tidy and clean by organizing your power and AV cables in detachable cable holder.
- Easy installtion - Step-by-step user manual and organized hardware kit for hassle free mounting.
Full Specifications
| Brand | suptek |
|---|---|
| Color | black |
| Material | Alloy Steel |
| Model Number | ML6802 z |
| Mounting Type | Tabletop Mount |
| Movement Type | Rotate, Swivel, Tilt, Articulating |
| Mfr Part Number | ML6802 |
| Compatible Devices | Monitor |
| Enclosure Material | Alloy Steel |
| Maximum Tilt Angle | 45 degrees |
| Maximum-Supported Screen Size | 32 inches |
| Minimum-Supported Screen Size | 13 inches |
| Global Trade Identification Number | 00739450799423 |
| Full listing title | Suptek Dual LED LCD Monitor Stand up Free-Standing Desk Mount for 2 / Two Screens up to 32 inch Extra Tall 31.5 inch Pole Heavy Duty Fully Adjustable Stand Vertical Array (ML6802) |
Ready to buy?
Suptek Dual LED LCD Monitor Stand up Free-Standing Desk Mount for 2 / Two Screens up to 32 inch Extra Tall 31.5 inch Pole Heavy Duty Fully Adjustable Stand Vertical Array (ML6802) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- vLLM 0.21 Adds Intel GPU Support: What It Means for Budget AI Rigs
- Set Up a Local LLM Coding Assistant in VS Code on an RTX 3060 12GB (2026)
- Best Gaming Mouse Pad for Competitive FPS in 2026: 5 Picks Ranked by Glide, Tracking, and Sweat Resistance
- AMD Ryzen AI Halo ($4K) vs a $900 RTX 3060 12GB Local-LLM Build: Buy or Build?
- Best SATA SSD for Retro PC Upgrades in 2026
- Ryzen 7 9800X3D Hits Record-Low Price — What It Means for AM4 Upgraders
- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026?
- Best Streaming Gear for PC Gamers in 2026
- Best SATA SSD for a PS4 Upgrade in 2026: BX500 vs 870 EVO vs WD Blue
- Crucial BX500 vs Samsung 870 EVO for Budget & Retro Builds
- Best Mac for AI & LLM Workloads in 2026
- Strix Halo vs RTX 3060 12GB: Unified Memory or Discrete VRAM?
- Best budget SSD for a gaming PC in 2026: BX500 vs 970 EVO Plus vs SSD Plus
- Period-Correct 1999 LAN Rig: Pentium III, Voodoo3 3000, Sound Blaster
- The Sound Blaster Monopoly: How Creative Still Shapes Retro PC Audio in 2026
- Best NVMe Boot SSD for an AM4 Ryzen Build: 970 EVO Plus vs the Budget Field
- Arc B580 12GB vs RTX 3060 12GB: Which 12GB Card for 1440p in 2026?
- 32GB of DDR5 Drops to $240 in New Newegg Build Bundles
- Samsung and SK Hynix Plan $590B Chip Push as Memory Prices Climb
- Best Single-Board Computers for AI and Robotics Projects in 2026
- Best 4K Monitor for PS5 and PC Under $500: KOORUI QD-Mini LED vs Samsung Odyssey
- Best GPU Under $400 for Llama-Class 8B Models in 2026
- Adafruit's Cyberdeck Raspberry Pi Music Workstation Guide Lands
- GeForce 4 Ti 4600 Won't Boot in Windows XP — Field Troubleshooting Guide
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090