Easycargo
Easycargo 4pcs 3D Printer 40mm Fan 12V DC
Bottom line: The Easycargo 4pcs 3D Printer 40mm Fan 12V DC: Four 4010 fans plus four grills and mounting screws in one 10.99 dollar kit; main trade-off: sleeve bearing, not ball bearing, so vertical mounting shortens service life.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Four 4010 fans plus four grills and mounting screws in one 10.99 dollar kit
- ✓ 5.49 CFM at 6500rpm handles NEMA 17 steppers and stepper driver heatsinks
- ✓ Rated 25.1dBA, quiet enough for an enclosure-free 3D printer on a desk
- ✓ 40,000-hour sleeve bearing life rating on every fan in the pack
- ✓ Starts at 7VDC, so it still spins on undervolted or PWM-controlled headers
Cons
- ✗ Sleeve bearing, not ball bearing, so vertical mounting shortens service life
- ✗ 2-pin connector has no tach or PWM wire for fan-speed monitoring
- ✗ 5.6 inch (150mm) leads often need an extension on larger printer frames
- ✗ 10.8-13.2VDC working range rules out 24V printer boards without a converter
Manufacturer description
4 pieces 4010 40mm 12V DC cooler fanSpecifications:- Bearing: Sleeve Bearing- Dimension: 40x40x10mm (LxWxH)- Connector: 2-pin-2.5mm- Wire length: 5.6 inch (150mm)- Weight: 13.5 gram- Air flow: (5.49 CFM)- Speed: (6500rpm)- Noise level: (25.1dBA)- Air pressure: (2.87AmmAq)- Life time: (40,000 hours)- Working Voltage: (10.8-13.2VDC)- Start-up Voltage: (7VDC)- Current: (100mA)Package includes:- 4 pieces 40mm Fan 12V DC- 4 Pack 40mm Fan grill / guard- Screw and nuts mounting kit.Can be used for cooling stepper motor driver, 3D printers, NEMA 17, Thermoelectric Peltier Module TEC1-12706 and other…
SpecPicks Verdict
SpecPicks scored Easycargo 4pcs 3D Printer 40mm Fan 12V DC using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. Easycargo's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Hypro sleeve bearing cooling fan 40mm 12V DC.
- Dimension (40x40x10mm), Connector (2-pin-2.5mm), Wire length (5.6"/150mm), Weight (13.5 gram).
- Air flow (5.49 CFM), Speed (6500rpm), Noise level (25.1dBA), Life time (40,000 hours), Working Voltage (10.8-13.2VDC)
- Can be used for for cooling stepper motor driver, 3D printers, NEMA 17, Thermoelectric Peltier Module TEC1-12706 and other electronics & robotic projects.
- Package includes: 4 pieces 40mm Fan 12V DC + 4 Pack 40mm Fan Grill / Guard + Screw Bolts Mounting Kit.
Full Specifications
| Brand | Easycargo |
|---|---|
| Model | EDM4010C12-04 |
| Weight | 13.5 gram |
| Voltage | 12 volts |
| Wattage | 1.2 watts |
| Material | Copper |
| Dimensions | 40x40x10mm |
| Unit Count | 4 Count |
| Noise Level | 25.1 db |
| Part Number | EDM4010C12-04 |
| Material Type | Copper |
| Cooling Method | Air |
| Number of Items | 4 |
| Package includes | 4 pieces 40mm Fan 12V DC + 4 Pack 40mm Fan Grill / Guard + Screw Bolts Mounting Kit. |
| Air Flow Capacity | 5.49 cfm |
| Compatible Devices | Printer |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 6500 rpm |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
| Full listing title | Easycargo 4pcs 3D Printer 40mm Fan 12V DC, 4010 Cooling Fan Sleeve Bearing Brushless 2 pin, 40mm Cooler Fan + Grill Mounting Kit 40mm x 40mm x10mm |
Ready to buy?
Easycargo 4pcs 3D Printer 40mm Fan 12V DC, 4010 Cooling Fan Sleeve Bearing Brushless 2 pin, 40mm Cooler Fan + Grill Mounting Kit 40mm x 40mm x10mm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- ASUS A7N8X-Deluxe + Athlon XP Barton 2500+: The Definitive 2003 Enthusiast Build Guide
- Intel Arc A770 LLM Performance: Local Inference Guide
- Steam Deck OLED vs ROG Xbox Ally: 2026 Comparison
- Logitech G502 Hero vs SteelSeries QcK: The Cheap FPS Setup That Still Wins in 2026
- Build Your Own Gaming PC in 2026: The 5 Components That Actually Matter
- llama.cpp vs vLLM for Single-User Local Chat in 2026: Which Backend Fits?
- Inside the Intel 8087: Decapping a 1980 Math Coprocessor's Microcode
- Direct3D vs OpenGL vs Glide: The API War That Shaped PC Gaming
- Local AI Image Generation: Best AMD GPUs for 2026
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive
- llama.cpp vs vLLM for Single-User Local Chat on a 12GB GPU (2026)
- Best Sim Racing Wheel for Forza on Xbox + PC 2026
- Best Budget SSD for a Gaming PC in 2026: SATA vs NVMe
- Intel Plans Two 22-Core Nova Lake-S SKUs With Game-Boosting Cache
- Sony to End Physical PlayStation Disc Production by 2028: What It Means for Retro Collectors
- How to run Qwen 3 32B on AMD Radeon RX 7900 XTX
- NVIDIA Nemotron 3 Ultra: What It Takes to Run Locally
- GameSir G7 SE vs 8BitDo Pro 2: Best Wired-Feel Controller for PC & Steam Deck
- Wired vs Bluetooth Headsets for Competitive FPS in 2026: The Latency Math
- Gemma 4 31B Heretic Finetune: Can It Run on a 12GB RTX 3060?
- Minecraft on Raspberry Pi via Vulkan: 2026 Setup Guide
- Best Gaming Controllers for PC in 2026: 5 Picks Tested Across Genres
- Best Budget Battlestation 2026: 5 Picks That Punch Up
- Best Wired Gear for Tournament-Legal LAN Play in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090