F-Yi
F-Yi GRBL Controller Board 3 Axis Controller Panel for DIY CNC 3018 1610 2418
Bottom line: The F-Yi GRBL Controller Board 3 Axis Controller Panel is a specs-and-price decision rather than a crowd-consensus one in the displays & upscalers category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Support GRBL and benbox firmware.Support CNC 3-axis laser engraving machine.
- ✓ Backed by F-Yi's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
GRBL 3 Axis Control BoardOutput signal:1: Fan: used for shaft motor cooling2: Shaft: connect motor shaft, keep the same with power supply voltage, 5A electricity, if the motor power of the spindle is high, can connect external relays such as the switch.G code M3 open, M5 closed, with version 0.9/1.1 of the firmware can adjust PWM, achieve the speed of the axis governing and tunable laser3: X axis motor signal output, A4988 max 1.5A electric current4: Y-axis motor signal output, A4988 max 1.5A electric current5: Z-axis motor signal output, A4988 max 1.5A electric currentInput signal:1: X-axis…
SpecPicks Verdict
SpecPicks scored F-Yi GRBL Controller Board 3 Axis Controller Panel using a rating × review-volume × price-fit model applied to published specs and reviews across the displays & upscalers category. F-Yi's displays & upscalers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for displays & upscalers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Support GRBL and benbox firmware.Support CNC 3-axis laser engraving machine.
- Input voltage: DC7V-36V. Power supply：Recommended use 12V-24V , Recommended current value5A-10A. (the power supply voltage should be the same as the laser voltage.)
- USB cable:Length 20cm.Firmware: GRBL 08, 09, 1.1and so on.
- It suitable for 3018 Pro,2418 and so on.Please set the stroke in the command.For example 3018, please set the stroke in the command, 30cm length and 18cm width;2418, please set the XY stroke in the command, length 24cm, width 18cm.
- Package List:1pcs GRBL Control Board +1pcs USB cable + 3pcs Heat sinks.
Full Specifications
| Brand | F-Yi |
|---|---|
| Color | black |
| Voltage | 24 volts |
| Material | Copper |
| USB cable | Length 20cm.Firmware: GRBL 08, 09, 1.1and so on. |
| Connectivity | USB |
| Display Type | LCD or LED |
| Package List | 1pcs GRBL Control Board +1pcs USB cable + 3pcs Heat sinks. |
| Input voltage | DC7V-36V. Power supply：Recommended use 12V-24V , Recommended current value5A-10A. (the power supply voltage should be the same as the laser voltage.) |
| Material Type | Copper |
| Number of Items | 1 |
| Number of Packs | 1 |
Ready to buy?
F-Yi GRBL Controller Board 3 Axis Controller Panel for DIY CNC 3018 1610 2418 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Displays & Upscalers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 5 2600 vs Ryzen 5 5600X for CPU-Only gpt-oss 20B (2026)
- Build a Raspberry Pi Retro Handheld in 2026: Parts and Setup
- KOORUI 27" 4K vs Samsung Odyssey 4K: Best 27-Inch Panel for PC and Console
- Steam Deck Sleep Mode: Should You Leave It Plugged In?
- Best Storage for a Raspberry Pi 4 Home Server: microSD vs SATA SSD vs NVMe
- Best SSD for a Raspberry Pi 4 Media Server in 2026
- Best SATA SSD for a 2026 Game Library Drive
- Voodoo3 3000 Period-Correct Build Log: Quake 3 + UT99 LAN Rig for 1999
- Best PC Game Streaming Gear in 2026: 5 Picks for Mic, Light & Capture
- Forza Horizon 6 Hits 130K Concurrent on Steam, Tops PC Gamer at 84/100
- Best Force-Feedback Racing Wheel for PC in 2026: G29 vs HORI vs Thrustmaster
- Best PC Gaming Peripherals Under $50 in 2026
- Best Gaming PC Upgrades Under $200 in 2026: 5 Picks That Move the Needle
- Google's Tiny Gemma 3 Board: What a $0 SBC Gemma Demo Means for Local AI
- NVIDIA RTX A6000 48GB Review: The Workstation Card That Still Owns Local 70B Inference (2026)
- All-AMD Gaming PC Build for 2026: Our Top 5 Ryzen + Radeon Configurations
- Ryzen 7 5800X vs 5700X for Gaming: Is the $60 Gap Worth It?
- Best 8GB GPU for Local LLMs in 2026
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- Best Plug-and-Play Retro Console and Handheld to Buy in 2026: 5 Ranked Picks
- Self-Host Immich on a Budget Homelab Box: Storage Tiers That Make Sense
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- The Best Raspberry Pi Projects for Students in 2026 (With a Real Parts List)
- Qwen3 Local: RTX 3060 12GB Build vs Mac Mini for Inference
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090