Skip to main content
FNIRSI HS-02A 100W Portable Corded Soldering Iron Kit, 3S Fast Heating, 212-842℉, Pre-set 3 Groups Temperature, 6 F245 Soldering Tips, Smart Digital Soldering Iron Pen Tool for Electronics Repair
FNIRSI

FNIRSI HS-02A 100W Portable Corded Soldering Iron Kit

Bottom line: The FNIRSI HS-02A 100W Portable Corded Soldering Iron Kit: Up to 100W from a 9-20V input, with about 3-second tinning per FNIRSI; main trade-off: corded only; no cordless or battery operation.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For PC and retro-hardware cleaning and maintenance tools, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Up to 100W from a 9-20V input, with about 3-second tinning per FNIRSI
  • ✓ Six F245 tips included: K, KU, JS, I, C2 and B
  • ✓ Three temperature presets across an adjustable 212-842°F range
  • ✓ Larger 0.96-inch display, shorter tip and better grip than the HS01
  • ✓ 100W adapter and carry case included, ready to use out of the box

Cons

  • ✗ Corded only; no cordless or battery operation
  • ✗ May restart under load unless set to Adaptive Power Mode or a lower voltage
  • ✗ 0.96-inch screen is small for reading settings at arm's length
  • ✗ Listing does not mention a stand or tip-cleaning sponge in the kit

Manufacturer description

The FNIRSI HS-02A is a 100W smart soldering iron kit for electronics repair, circuit board work, jewelry repair and micro soldering. It replaces the HS01 with a better grip, a shorter tip, a larger 0.96-inch display and faster heating. FNIRSI rates its tinning time at about 3 seconds. The iron draws up to 100W from a 9-20V input, and the 100W adapter is in the box, so you can start soldering right away. If the iron restarts under load, switch to Adaptive Power Mode or lower the voltage to keep it running steadily. You can set the temperature anywhere from 212 to 842°F, and three preset…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for FNIRSI HS-02A 100W Portable Corded Soldering Iron Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "Up to 100W from a 9-20V input, with about 3-second tinning per FNIRSI"; the main trade-off is "Corded only; no cordless or battery operation". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Can the FNIRSI HS-02A be used cordless?

No. The HS-02A must be used with its supplied cable and does not support cordless or battery operation.

What power supply does the HS-02A need?

It takes 9-20V and handles up to 100W. A 100W adapter is included. If the iron restarts under load, switch to Adaptive Power Mode or lower the voltage.

What is the temperature range, and can I save settings?

You can set the temperature from 212 to 842°F, and there are three preset groups for quick switching between your usual working temperatures.

Which soldering tips come with the kit?

Six F245 tips: K, KU, JS, I, C2 and B. They cover drag soldering, fine-pitch pads, point work and larger joints.

What should I do if the iron will not power on?

FNIRSI recommends flipping the connector or swapping the CC cable ports, then restoring factory settings, then updating to the latest firmware.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 【FNIRSI HS02 Soldering Iron】We upgraded HS01, HS02 has a better grip, shorter tip, larger 0.96'' display, and faster heating speed.It is suitable for electronic component repair, jewellery repair, circuit board soldering, micro soldering.
  • 【Supports up to 100W & 3 S Tinning】Handles up to 100W (9–20V). Runs smoothly even at lower power. If restart occurs, simply switch to Adaptive Power Mode or lower the voltage for safe.
  • 【Portable and Lightweight】We provide a storage case for the soldering pen, which will make it easier for you to carry it outside.Its ergonomics are ensures greater results and comfort
  • 【3 Groups Pre-set Temp】Preset multiple groups of fixed temperature, fast temperature adjustment without time-consuming.The temperature is adjustable within the range of 212-842 °F.
  • 【Smart & Safe】 features sleep, automatic power-off, and other modes.Customize setting,set soldering iron parameters according to needs to meet daily usage.
  • 【Extensive Accessories】 HS02A is equipped with 6 soldering iron tips (K、KU、JS、I、C2、B). The integrated design allows the soldering iron to heat up quickly and maintain a stable temperature.The 100W charging adapter allows you to use it immediately.

Full Specifications

BrandFNIRSI
Wattage100 watts
Head StylePencil
Style NamePencil
Item Length7.01 Inches
Model NumberFNIRSI-HS-02A-6
Power SourcePD/DC
CompatibilitySwitch
Handle MaterialRubber or Silicone
Heating ElementNichrome
Special FeaturePortable
Additional FeaturesPortable
Included Components100W PD Adapter, Soldering Iron, Soldering Iron Stand, Soldering Iron Tips, USB
Manufacturer Part NumberFNIRSI-HS-02A-6
Specific Uses For ProductJewelry Soldering, Residential Use
Full listing titleFNIRSI HS-02A 100W Portable Corded Soldering Iron Kit, 3S Fast Heating, 212-842℉, Pre-set 3 Groups Temperature, 6 F245 Soldering Tips, Smart Digital Soldering Iron Pen Tool for Electronics Repair

Ready to buy?

FNIRSI HS-02A 100W Portable Corded Soldering Iron Kit, 3S Fast Heating, 212-842℉, Pre-set 3 Groups Temperature, 6 F245 Soldering Tips, Smart Digital Soldering Iron Pen Tool for Electronics Repair is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Tools & Maintenance

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →