JRready ST6556 MLX Pin Connector Kit
Bottom line: Per its Amazon listing, the JRready ST6556 MLX Pin Connector Kit: HIGH QUALITY CONNECTOR: JRN001 series 6.35mm pitch connector is made of PA66 material; the operating temperature range is from -40°C to +105°C.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ HIGH QUALITY CONNECTOR: JRN001 series 6.35mm pitch connector is made of PA66 material
- ✓ The operating temperature range is from -40°C to +105°C
- ✓ Backed by JRready's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for JRready ST6556 MLX Pin Connector Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- HIGH QUALITY CONNECTOR: JRN001 series 6.35mm pitch connector is made of PA66 material,with a wire range of 12-24 AWG.Rated current is 13.5A MAX. The operating temperature range is from -40°C to +105°C. The flame retardant rating is UL94-V2. Under environmental conditions of 23°C ± 5°, the temperature rise at 13.5A current is no more than 30°C.The connector can be mated and unmated over 100 times.Exposure to air may result in slight color differences, but it doesn't affect the performance of the product. If you have any questions about this, please contact us anytime.
- EASY INSTALLATION DESIGN: The connector has a keying design to prevent incorrect insertion and ensure correct mating; Independent cavity design Prevents terminal interference during insertion and provides electrical isolation. Locking housing have snap-on design ensures secure connection with audible "click" when mated, preventing accidental disconnection.
- EXCELLENT CONDUCTIVE PERFORMANCE: The 14-20AWG terminals are made of tinned brass, offering excellent conductivity, oxidation resistance, and superior corrosion and wear resistance.Reliable and safe connection, no loosening problems, provide an economical and efficient solution for industrial applications.The kit includes a large quantity of terminals for crimping practice or as spares, providing a great user experience, especially for beginners.
- UPGRADED PIN REMOVAL TOOL:JRDDS-T280320-01 is easy and safe terminal removal without damaging connector housings. Push rod design allows easy pin removal from terminals with short or no wires.
- WIDE APPLICATION: Apply in wire to board and wire to wire combinations for industrial . The connectors can be applied to car, aero space, household appliances, electrical maintenance, consumer electronics, network servers, industrial automation, data computing etc.
Full Specifications
| Brand | JRready |
|---|---|
| Gauge | 22.0 |
| Model | ST6556 |
| Material | Brass, Nylon |
| Terminal | Pin Terminal |
| Part Number | ST6556 |
| Material Type | Brass, Nylon |
| Connector Type | Pin |
| Number of Items | 3 |
| Connector Gender | Male |
| Contact Material | Brass |
| Specification Met | UL |
| Insulation Material | Nylon |
| Insulation Material Type | Nylon |
| Full listing title | JRready ST6556 MLX Pin Connector Kit with Molex Pin Extractor Tool 6.35mm Pitch Wire Power .084” Connectors 14-20AWG Pin Terminals 2.13mm Diameter 42024 Series with Terminal Removal Tool |
Ready to buy?
JRready ST6556 MLX Pin Connector Kit with Molex Pin Extractor Tool 6.35mm Pitch Wire Power .084” Connectors 14-20AWG Pin Terminals 2.13mm Diameter 42024 Series with Terminal Removal Tool is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Streaming + Gaming CPU in 2026
- Best CPU Cooler for a Ryzen 7 5800X (AM4) in 2026
- Forza Horizon 6 on Steam Deck: Best Dock and Controller Setup for 2026
- Ryzen 5 5600G vs Ryzen 7 5700X: Best Budget Build CPU 2026
- Intel Arc Pro B60 AI Performance: 24GB VRAM Explained
- Open WebUI on a Raspberry Pi 4, Inference on an RTX 3060: The Split-Brain Home LLM Stack
- Running Qwen 3.6 27B on a Single RTX 3060 12GB: Quantization, Context, and Real Tok/s
- NVIDIA Nemotron 3 Ultra: What It Takes to Run Locally
- RTX 3060 12GB Local LLM: Reddit Consensus on What Runs (2026)
- Handheld Gaming PC Sale: Best 2026 Deals to Buy Now
- Best Parts for a Local LLM Box That Also Runs Jellyfin in 2026
- RetroPie Handheld Build Guide 2026: Hardware & Setup
- Cheapest 1440p GPU in 2026: Budget Buying Guide
- Building a Period-Correct 2001 GeForce 3 + Windows 98 SE Gaming Rig
- Qwen 3.8 Open Weights: What Fits on a 12GB GPU
- PCIe Gen2/Gen3 1:2 Analog MUX: Practical Maker Implementation
- Ryzen 7 5800X vs 5700X for Streaming and Gaming in 2026
- Gemma 4 Tool-Calling Fix: Re-test Function Calls Locally
- llama.cpp vs vLLM for Single-User Local Chat in 2026: Which Backend Fits?
- Beyond LLMs: How Agent Logic Scales Enterprise AI
- Voodoo5 5500 PCI Boots on a Modern Z77 Board: Retro-on-Modern Just Got Easier
- Best Mini PC for Local LLMs in 2026: Ryzen AI Halo vs a DIY 3060 Box
- Best GPU for 1080p Gaming in 2026: Where the RTX 3060 12GB Lands
- Building a Period-Correct 1998 Voodoo2 SLI Win98 Gaming PC in 2026: Parts, Boot Media, and Glide Setup
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090