AA AUDIO ACCESSORY

AA AUDIO ACCESSORY Design for Shure SM7B SM7dB MV7 Never-Sag Mic Boom Arm

Name: AA AUDIO ACCESSORY Design for Shure SM7B SM7dB MV7 Never-Sag Mic Boom Arm, Extra-Long 950mm Reach, 6.6lbs Load Capacity, Gear-Lock Suspension
Brand: AA AUDIO ACCESSORY
SKU: B0G6KKMGMC

Status: AA AUDIO ACCESSORY Design for Shure SM7B SM7dB…: Unavailable on Amazon as of 2026-10-06 10:29 UTC. SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

🛒 Search eBay for this model

Bottom line: The AA AUDIO ACCESSORY Design: Gear-lock system holds up to 6.6lbs (3kg) without the sag of spring-loaded arms; main trade-off: 15-degree gear steps limit fine-tuning between detents.

Unavailable on Amazon as of 2026-10-06 10:29 UTC

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: AA AUDIO ACCESSORY Mic Arm Desk Mount — $42.49 on Amazon as of 2026-10-06 20:20 UTC (price may vary).

View Current Price — $42.49

Similar: InnoGear Low Profile Mic Arm Boom Arm Microphone… — $37.99 on Amazon as of 2026-10-06 20:20 UTC (price may vary).

View Current Price — $37.99

Similar: Aenllosi Hard Carrying Case Compatible with… — $28.99 on Amazon as of 2026-10-06 22:24 UTC (price may vary).

View Current Price — $28.99

Original listing (currently unavailable) → Compare to similar accessories

By Mike Perry, Founder & Editor-in-Chief · Listing data updated 2026-10-06

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. About the author →

Pros & Cons

Pros

✓ Gear-lock system holds up to 6.6lbs (3kg) without the sag of spring-loaded arms
✓ 950mm/37.4in reach clears wide desks and dual-monitor setups
✓ Rated for Shure SM7B, SM7dB, MV7+, Blue Yeti, Rode PodMic and other heavy studio mics
✓ Aluminum alloy plus glass-fiber nylon composite build, not stamped steel
✓ Six snap-in clips and built-in channels route XLR/USB cable out of frame

Cons

✗ 15-degree gear steps limit fine-tuning between detents
✗ Manufacturer notes it may settle slightly after mounting until fully tightened
✗ Large gear knob must be retightened by hand rather than self-tensioning

SpecPicks Verdict

SpecPicks scored AA AUDIO ACCESSORY Design using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. AA AUDIO ACCESSORY's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

[6.6lbs Max Load Capacity] The shure mic arm desk mount supports microphones up to 6.6lbs (3kg). It’s ideal for heavier models like the Shure SM7B, SM7dB, MV7+, MV7X, Blue Yeti, AT2020, AT2035, FIFINE, Rode PodMic, and other studio mics that typical mic arms can’t hold.
[Why It Supports Up to 6.6 lbs] Unlike spring-loaded arms that weanken and sag over time, this boom arm uses a gear-lock system to hold your mic firmly in place. The large gear knob allows easy adjustments and long-term stability without losing tension.
[Ultra-Sturdy & Durable Construction] Made of heavy-duty aluminum alloy and glass-fiber nylon composite, this mic boom arm delivers outstanding stability and durability.
[950mm/37.4” Extra-Long Reach] Quietly Rotates Full 360-Degrees & Provides up to 37.4” (950mm) of Mic Arm Extension.
[Built-In Cable Management] Keep your setup clean with built-in cable channels and six snap-in clips.
[Worry-Free Support] Our professional & friendly support team is here to help with any issues. This gear-lock arm adjusts in 15° steps with rigid locking system, it has no rebound and may settle slightly after mounting, then stays firmly in place. Always fully tighten the gear knob for best stability.

Full Specifications

Brand	AA AUDIO ACCESSORY
Color	Black
Style	Suspension Mic Boom Arm
Weight	3kg
Material	Aluminum, Metal
Base Type	Flat
Model Number	ABA02 Mic Boom Arm
Material Type	Aluminum, Metal
Product Style	Suspension Mic Boom Arm
Maximum Height	95 centimeters
Warranty Description	1 year warranty.
Manufacturer Part Number	ABA02
Maximum Weight Recommendation	6.6 pounds
Full listing title	AA AUDIO ACCESSORY Design for Shure SM7B SM7dB MV7 Never-Sag Mic Boom Arm, Extra-Long 950mm Reach, 6.6lbs Load Capacity, Gear-Lock Suspension Microphone Stand Desk Mount for Blue Yeti Rode Heavy Mics

Ready to buy?

Amazon shows no buyable offer for AA AUDIO ACCESSORY Design for Shure SM7B SM7dB… at the last check. A similar in-stock product is AA AUDIO ACCESSORY Mic Arm Desk Mount. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $42.49