upHere 10-Port ARGB PWM Fan Hub Controller - Magnetic Installation PC Case Fan Splitter with SATA Power, 5V 3-Pin RGB LED Support for PC Case Cooling & Lighting Customization Black P13PARGB BK
As an Amazon Associate, SpecPicks earns from qualifying purchases.
*Price sourced from Amazon.com. Last updated 2026-08-15. Price and availability subject to change.
Bottom line: The upHere 10-Port ARGB PWM Fan Hub Controller - Magnetic Installation PC Case Fan Splitter with SATA Power, 5V 3-Pin RGB LED Support for PC Case Cooling & Lighting Customization Black P13PARGB BK is a specs-and-price decision rather than a crowd-consensus one in the controllers & gamepads category, priced around $13.99. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.
Pros & Cons
Pros
- ✓ Backed by upHere's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
SpecPicks Verdict
SpecPicks scored upHere 10-Port ARGB PWM Fan Hub Controller - Magnetic Installation… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the controllers & gamepads category. upHere's controllers & gamepads lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for controllers & gamepads of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Key Features
- 10-Port All-in-One PC Fan & Lighting ARGB Hub: Upgrade your PC with our 2-in-1 PWM & ARGB Fan Hub—solves motherboard port shortages, simplifies cable management, and enhances cooling/lighting. Ideal for gaming rigs, workstations, and custom builds, its user-friendly for enthusiasts and beginners
- 10-Port ARGB Controller: 10 ARGB ports let you connect fans/strips for custom lighting. Compatibility Note: Only works with 5V 3-pin ARGB motherboards—DO NOT use with 12V 4-pin RGB headers (avoids damage)
- 10-Port PWM Fan Hub: 10 PWM ports support synchronized speed control to optimize airflow and reduce noise. Note: PWM fan speed is only detected via the white FAN 1 port
- Smart Safety Protection: Our hub is equipped with a 10-channel dual-circuit protection device, with independent short-circuit/overload protection for each ARGB port, increasing safety performance by 200%. Even if the connection is wrong, only the affected port will be disabled, effectively protecting your motherboard and connected devices from damage
- Stable SATA Power Supply: Dedicated SATA power interface draws directly from your PC's PSU, ensuring stable output even at full 10-port load. Relieves motherboard header burden, avoiding overload and inconsistent performance
- Magnetic Installation & Compact Design: Strong magnetic base enables tool-free, quick installation inside your PC case. At 9.6X5.8X1.5 cm / 3.78X1.74X0.59 in (L×W×H), its compact size hides easily, keeping your case neat
Full Specifications
| Brand | upHere |
|---|---|
| Dimensions | 9.6x5.8x1.5 cm |
| Unit Count | 1 Count |
| Noise Level | 21 db |
| Part Number | P13PARGB-BK HKUS |
| Compatibility | PC |
| Cooling Method | Air |
| Number of Items | 1 |
| Compatible Devices | Desktop |
| 10-Port PWM Fan Hub | 10 PWM ports support synchronized speed control to optimize airflow and reduce noise. Note: PWM fan speed is only detected via the white FAN 1 port |
| Included Components | case fan x3 |
| Power Connector Type | SATA |
| Maximum Rotational Speed | 1800 rpm |
| Item Dimensions L x W x H | 3.78"L x 2.28"W x 0.59"H |
Ready to buy?
upHere 10-Port ARGB PWM Fan Hub Controller - Magnetic Installation PC Case Fan Splitter with SATA Power, 5V 3-Pin RGB LED Support for PC Case Cooling & Lighting Customization Black P13PARGB BK is available on Amazon with Prime shipping and the full Amazon returns policy. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
View Current Price on Amazon →
*Price sourced from Amazon.com. Last updated 2026-08-15. Price and availability subject to change.
Related Controllers & Gamepads
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Samsung's 240Hz 1440p Gaming Monitor Drops to $169
- Best CPU Cooler for AM5 Ryzen 9 Overclocking (2026)
- Raspberry Pi vs AMD GPUs for Local LLMs: What the Specs Show
- Best PC Couch-Gaming Setup in 2026: Controllers, Display, and Audio
- Best CPU Cooler for the Ryzen 7 5800X: Air vs 120mm vs 240mm AIO
- Raspberry Pi 4 as a SimHub Dash for a Logitech G29 Rig
- Best 4K Monitor for Reviewing AI-Generated Images on an RTX 3060
- Best Gaming Keyboard for Office and Gaming Crossover (2026)
- Jetson Orin Nano Super for Local LLM: 7B/13B Tokens-per-Second Reality Check
- Can the RTX 3060 12GB Still Game at 1440p in 2026?
- Sound Blaster Audigy FX vs Sound BlasterX G6: Picking a Card for Retro and Modern Dual-Boot
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- Do You Even Need a Graphics Card? Ryzen 5 5600G iGPU vs RTX 3060 for 1080p
- Best SATA SSD to Upgrade Your PS4 Pro Storage in 2026
- Build a RetroPie Arcade on a Raspberry Pi 4 8GB in 2026
- Best CPU for AI Inference Workstations in 2026
- CompactFlash-to-IDE Boot Drive: The Silent Win98 Build Upgrade
- Best Esports Club Practice Room Gear in 2026
- ASRock Phantom Gaming vs Steel Legend 360 LCD Review
- Building a Silent Pentium III Windows 98 Gaming Rig in 2026
- Bridging Retro Audio: Sound Blaster Legacy to a Modern Sound BlasterX G6
- Prime Day 2026: Gaming Monitor Deals Worth a Look
- Real Productivity on 32-64GB RAM for Local LLMs
- Best Controller for Steam Deck Docked Mode in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090