How to run Llama 3.1 70B on AMD Radeon RX 7900 XTX

This tutorial walks you through running Llama 3.1 70B on an AMD Radeon RX 7900 XTX. Exact commands, expected tokens-per-second, and the tradeoffs you should know before starting.

Does it fit?

AMD Radeon RX 7900 XTX has 24 GB of GDDR6. Llama 3.1 70B at q4_K_M wants ~42 GB of it for weights alone.

Verdict: ⚠️ Tight fit. You'll need CPU offload (llama.cpp with 9 layers on CPU) or drop to q3_K_S. Expect 6-12 tok/s with offload.

Install Ollama (the easy path)

# macOS/Linux
curl -fsSL https://ollama.com/install.sh | sh
ollama pull llama3.1:70b
ollama run llama-3-1-70b

Ollama handles GPU detection automatically on NVIDIA (via CUDA), AMD (via ROCm on Linux), and Apple Silicon (via Metal). No manual configuration needed.

Install llama.cpp (more control)

llama.cpp gives you flag-level control over quantization, context length, and layer offload. Build from source:

git clone https://github.com/ggerganov/llama.cpp
cd llama.cpp
make GGML_HIPBLAS=1 -j

# Download a quantized GGUF (community favorite: bartowski or TheBloke on HuggingFace)
./llama-cli -m ~/models/llama-3-1-70b-q4_k_m.gguf \
 -n 512 -c 4096 \
 -ngl 20 \
 -p "Write a haiku about GPUs"

With 24GB VRAM, offload ~20 layers; the rest stays on CPU. Expect roughly half the all-GPU speed but much cleaner than running at smaller quants.

Expected performance

• Community reports from LocalLLaMA suggest ~10-25 tok/s on this class of hardware.

If you need more speed, bigger VRAM is the answer. Consider upgrading to a card with more headroom →.

Common issues

"out of memory" on the first prompt: reduce context length (-c 2048) or quantization (q4_K_S instead of q4_K_M).

Slow first token but fast generation: that's prompt processing ("prefill"). Normal — blame the KV cache building. Subsequent messages in the same session will be snappy.

Frequent swapping / system hangs: VRAM is full AND system RAM is full. Close Chrome. Add more DDR5.

Related

• Full AMD Radeon RX 7900 XTX benchmarks →
• Best GPU for Llama 3.1 70B →
• AI Rigs buyer's guide →

AMD Radeon RX 7900 XTX specs: 24GB memory, 355W TDP, 2022 launch. MSRP $999.

Does it fit? Full quantization matrix

Weight-only VRAM for Llama 3.1 70B at every common quant, plus the KV-cache overhead for a 4K-token context. KV cache scales linearly with context — see the context-length table further down.

Values are approximate — actual footprint depends on batch size, whether the KV cache is quantized (-ctk q8_0 -ctv q8_0 in llama.cpp halves it), and whether you reserve VRAM for a display. Rule of thumb: budget 5-10% headroom on top of the table.

How public benchmarks show and compared

Every tok/s, FPS, and synthetic score in this article is pulled live from the SpecPicks benchmark catalog (hardware_specs, ai_benchmarks, synthetic_benchmarks). We cite the source_name on each row — the vast majority are community-reported numbers from r/LocalLLaMA and llama.cpp GitHub Discussions, with synthetic scores from PassMark, Phoronix, and Tom's Hardware's GPU hierarchy.

Where DB rows exist for a specific model+quant+GPU combination, we quote the number exactly. Where they don't, we fall back to published spec-sheet values (VRAM capacity, TDP, memory bandwidth) plus the closest community-verified ballpark — clearly flagged as a ballpark, not a measurement. We prefer "we don't know" over a fabricated number.

SpecPicks does not run paid hardware review cycles; we aggregate. If you see a number you can improve on, pull-request the row.

Measured tok/s on this GPU

Live data from ai_benchmarks for AMD Radeon RX 7900 XTX, filtered to the Llama 3.1 70B family where available:

For the full tok/s matrix on this card across every model we've logged, see the AMD Radeon RX 7900 XTX benchmark page.

Context length and VRAM — the hidden cost

KV cache grows linearly with context. Here's the approximate overhead on top of 42.0 GB of q4_K_M weights for Llama 3.1 70B:

For long-context workloads (128K ≥ 32K) on consumer hardware, use llama.cpp's KV-cache quantization — -ctk q8_0 -ctv q8_0 roughly halves cache footprint with sub-1% quality loss. This is the single biggest VRAM-saving flag for long context.

Which runtime wins on this hardware?

Three mainstream runtimes target AMD Radeon RX 7900 XTX; the right one depends on your workload:

• Ollama — easiest. Auto-detects CUDA, handles model downloads, exposes an OpenAI-compatible API out of the box. Wraps llama.cpp; you give up fine-grained control for zero setup.
• llama.cpp — direct flag-level control over quant, context, KV-cache precision, batch size, split layers across GPUs. Where the LocalLLaMA community benchmarks its numbers (see the Apple-Silicon megathread #4167 for reference tok/s across M-series chips).
• vLLM — built for production serving. Tensor parallelism, PagedAttention, continuous batching. Linux + NVIDIA CUDA primary target. If you're not serving multiple concurrent users, the overhead isn't worth it.

For head-to-head numbers and install commands across all three, see our Ollama vs llama.cpp vs vLLM guide.

Troubleshooting — three failure modes and fixes

1. First token takes 5-30 seconds, then generation is fast. That's normal prefill: the model is processing your prompt before it can start generating. On a long prompt (4K+ tokens) prefill dominates the first-token latency. If it's unexpectedly slow, check that you actually offloaded layers to the GPU — nvidia-smi or powermetrics (macOS) should show near-100% utilisation during prefill. If utilisation is flat, your inference is running on CPU.

2. "Out of memory" halfway through a long chat. The KV cache grew past what the card can hold. Drop to a smaller quant (q4_K_M → q3_K_M), cut -c context length, or enable KV-cache quantization (-ctk q8_0 -ctv q8_0 in llama.cpp). On Ollama set num_ctx smaller in your Modelfile.

3. Tok/s is ~30% of what LocalLLaMA threads report. Three usual suspects: (a) power/thermal throttling — check sustained clocks during a long prompt; (b) PCIe x8 or x4 link when you expected x16 — nvidia-smi --query-gpu=pcie.link.width.current --format=csv; (c) running the wrong binary, e.g. a non-CUDA llama.cpp build on an NVIDIA card. Rebuild with GGML_CUDA=1 and confirm.

Sources

1. r/LocalLLaMA (community tok/s threads)
2. llama.cpp GitHub Discussions #4167 — Apple Silicon benchmark thread
3. Tom's Hardware GPU Hierarchy

Related guides

• AMD Radeon RX 7900 XTX full benchmark page
• Best GPU for Llama 3.1 70B
• Ollama vs llama.cpp vs vLLM
• What VRAM do you need for local LLMs?

Products mentioned

• PowerColor Red Devil AMD Radeon RX 7900 XTX Graphics Card
• Sapphire Pulse Radeon RX 7900 XTX AMD 24 GB GDDR6
• Sapphire 11322-02-20G Pulse AMD Radeon RX 7900 XTX Gaming…