Unitek

Unitek SATA/IDE USB 3.0 Adapter, Dual-Drive for 2.5/3.5" HDD, 24TB, 6Gbps

Name: Unitek SATA/IDE USB 3.0 Adapter, Dual-Drive for 2.5/3.5" HDD, 24TB, 6Gbps
Brand: Unitek
SKU: B01NAUIA6G
Price: 34.99 USD
Availability: InStock

By Mike Perry, Hardware Editor · Verified 2026-09-11

Mike Perry has researched PC hardware since 2014, tracking 80+ GPU generations, 50+ retro handheld platforms, and 30+ vintage PC configurations. He synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. View full credentials →

$34.99

As an Amazon Associate, SpecPicks earns from qualifying purchases.

🛒 See live eBay price Also on Amazon — View Current Price → Compare to similar external storage

*Price sourced from Amazon.com. Last updated 2026-09-10. Price and availability subject to change.

Bottom line: The Unitek SATA/IDE USB 3.0 Adapter, Dual-Drive for 2.5/3.5" HDD, 24TB, 6Gbps is a specs-and-price decision rather than a crowd-consensus one in the external storage category, priced around $34.99. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.

【Dual-Drive Simultaneous Access & Broad Compatibility】Connect and operate one SATA drive and one IDE drive at the same time. Works with 2.5"/3.5" SATA HDDs/SSDs (up to 24TB), 2.5"/3.5" IDE HDDs, and optical drives like CD/DVD-ROM and DVD-RW. The dual-head IDE connector (40-pin/44-pin) and SATA port allow easy connection. 【Fast USB 3.0 Speeds up to 6Gbps】Transfer files at up to 6Gbps for SATA drives and up to 5Gbps for IDE drives over USB 3.0. Backward compatible with USB 2.0/1.1 for reliable connectivity with older computers. 【Stable Power for Reliable Operation】Includes a 12V/2A power…

SpecPicks Verdict

SpecPicks scored Unitek SATA/IDE USB 3.0 Adapter, Dual-Drive for 2.5/3.5" HDD, 24TB… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the external storage category. Unitek's external storage lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for external storage of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.

Frequently Asked Questions

Can it read an old IDE hard drive and a SATA SSD at the same time?

Yes. The adapter connects one SATA drive and one IDE drive simultaneously, so you can copy directly from a legacy IDE disk to a modern SATA SSD in one pass.

What is the largest drive this adapter supports?

It supports 2.5" and 3.5" SATA HDDs and SSDs up to 24TB, plus 2.5" and 3.5" IDE hard drives and optical drives such as CD/DVD-ROM and DVD-RW.

Do I need to install drivers?

No. It is true plug-and-play with no driver installation required, and it also supports hot-swapping.

Does it work with a 3.5" IDE drive that needs its own power?

Yes. The kit includes a 12V/2A power adapter and a dedicated 4-pin power cable, which is required only for 3.5" IDE drives. SATA drives do not need the 4-pin cable.

Will it still work on an older PC without USB 3.0?

Yes. It is backward compatible with USB 2.0 and USB 1.1, though transfer speeds will fall well below the 6Gbps SATA and 5Gbps IDE ceilings.

Pros & Cons

Pros

✓ Backed by Unitek's warranty and support channels
✓ Ships via Amazon with Prime eligibility and the standard returns policy

Cons

✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified

Key Features

【Dual-Drive Simultaneous Access & Broad Compatibility】Connect and operate one SATA drive and one IDE drive at the same time. Works with 2.5"/3.5" SATA HDDs/SSDs (up to 24TB), 2.5"/3.5" IDE HDDs, and optical drives like CD/DVD-ROM and DVD-RW. The dual-head IDE connector (40-pin/44-pin) and SATA port allow easy connection.
【Fast USB 3.0 Speeds up to 6Gbps】Transfer files at up to 6Gbps for SATA drives and up to 5Gbps for IDE drives over USB 3.0. Backward compatible with USB 2.0/1.1 for reliable connectivity with older computers.
【Stable Power for Reliable Operation】Includes a 12V/2A power adapter to ensure stable power delivery. The dedicated 4-pin power cable is required only for 3.5" IDE drives (not needed for SATA drives).
【User-Friendly Features Built-In】No driver installation required — true plug-and-play. Supports hot-swapping, an On/Off switch for HDD protection, LED indicators for power and activity, and automatic sleep mode after 30 minutes of inactivity.
【Complete Kit & 24/7 Support】Package includes the SATA/IDE to USB 3.0 adapter, 12V/2A power adapter, 4-pin power cable, and 24/7 email customer support. Everything you need to start transferring data immediately.

Full Specifications

Size	M
Brand	Unitek
Color	USB A
Model	Y-3324
Warranty	2-year warranty
UnitCount	1
Manufacturer	Unitek
ItemPartNumber	Y-3324

Ready to buy?

Unitek SATA/IDE USB 3.0 Adapter, Dual-Drive for 2.5/3.5" HDD, 24TB, 6Gbps is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

See live eBay listings →

*Price sourced from Amazon.com. Last updated 2026-09-10. Price and availability subject to change.