NETGEAR WiFi Router (R6230)
Bottom line: The NETGEAR WiFi Router ($59.99 on Amazon as of 2026-10-06): Dual-band AC1200: up to 900 Mbps on 5GHz, 300 Mbps on 2.4GHz; main trade-off: 802.11ac only, no Wi-Fi 6 or Wi-Fi 6E support.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Dual-band AC1200: up to 900 Mbps on 5GHz, 300 Mbps on 2.4GHz
- ✓ Four 1G Ethernet ports for consoles, desktops, and NAS
- ✓ 880MHz processor plus advanced QoS for streaming and gaming traffic
- ✓ USB 2.0 port shares a drive or printer across the network
Cons
- ✗ 802.11ac only, no Wi-Fi 6 or Wi-Fi 6E support
- ✗ 1200 sq ft coverage limit is tight for multi-story homes
- ✗ 20-device recommendation is low for dense smart-home setups
- ✗ USB 2.0 port bottlenecks external drive transfer speeds
Manufacturer description
The NETGEAR R6230 is an AC1200 dual-band router built for apartments, condos, and smaller homes where a single access point needs to cover roughly 1200 square feet without fuss. NETGEAR rates it for up to 20 connected devices across the 2.4GHz and 5GHz bands, splitting AC1200 speed into up to 300 Mbps and up to 900 Mbps respectively, so laptops and phones that support 5GHz get the faster lane while smart plugs, cameras, and older gear stay on 2.4GHz. An 880MHz processor and two amplified external antennas handle the routing load, and advanced QoS prioritizes streaming and gaming traffic when…
SpecPicks Verdict
SpecPicks scored NETGEAR WiFi Router using a rating × review-volume × price-fit model applied to published specs and reviews across the networking category. NETGEAR's networking lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for networking of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How much area does the NETGEAR R6230 cover?
NETGEAR rates it for up to 1200 square feet, which suits apartments, condos, and smaller single-floor homes. Larger or multi-story houses will likely need a mesh system or an extender.
How many devices can the R6230 handle?
NETGEAR recommends up to 20 connected devices. That covers a typical household of phones, laptops, a console, a TV, and a handful of smart home devices.
How fast is the R6230?
It is an AC1200 dual-band router: up to 900 Mbps on the 5GHz band and up to 300 Mbps on 2.4GHz. Real-world speeds depend on your internet plan, distance, and client device.
Does the R6230 have Wi-Fi 6?
No. It is an 802.11ac (Wi-Fi 5) router. If you need Wi-Fi 6 or 6E for a dense smart-home or high-client-count setup, look at a newer model.
What can I plug into the USB port?
The single USB 2.0 port lets you share an external storage drive or a printer with any device on the network. USB 2.0 speeds make it better for light file sharing than large media transfers.
Key Features
- Maximum Range : 1200 Sq Ft
- Fast WIFI Performance: Get up to 1200 square feet wireless coverage with AC1200 speed (Dual band up to 300 plus 900 Mbps)
- Recommended for Up to 20 Devices; Reliably stream videos, play games, surf the internet, and connect smart home devices
- WIRED ETHERNET PORTS: Plug in computers, game consoles, streaming players, and other nearby wired devices with 4 x 1 Gigabit Ethernet ports.
- LOADED WITH ADVANCED TECHNOLOGY: Designed with an 880MHz processor, 2 amplified antennas, and advanced QoS.
- USB Connections; Share a storage drive or printer with any network connected device using the 1 x 2.0 USB port
Full Specifications
| Brand | NETGEAR |
|---|---|
| Color | Black |
| Weight | 1g |
| Voltage | 120240 volts |
| Coverage | Up to 1200 sq ft |
| Frequency | 880 MHz |
| Model Name | R6230-100NAS |
| Unit Count | 1 Count |
| Antenna Type | Fixed |
| Connectivity | Wireless, USB, WiFi |
| Model Number | R6230-100NAS |
| Maximum Range | 1200 Sq Ft |
| Built-In Media | NETGEAR AC1200 Smart WiFi Router – Dual Band Gigabit (R6230) |
| Control Method | App |
| Item Type Name | Netgear R6230-100NAS AC1200 Dual Band Wi-Fi Gigabit Router |
| Connection Type | Wired |
| Controller Type | App Control |
| Mfr Part Number | R6230-100NAS |
| Number of Ports | 2 |
| Special Feature | QoS |
| Full listing title | NETGEAR WiFi Router (R6230) - AC1200 Dual Band Wireless Speed (up to 1200 Mbps) | Up to 1200 sq ft Coverage & 20 Devices | 4 x 1G Ethernet and 1 x 2.0 USB Ports |
Ready to buy?
NETGEAR WiFi Router (R6230) - AC1200 Dual Band Wireless Speed (up to 1200 Mbps) | Up to 1200 sq ft Coverage & 20 Devices | 4 x 1G Ethernet and 1 x 2.0 USB Ports is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- How to run Llama 3.1 70B on AMD Radeon RX 7900 XTX
- How to run Qwen 3 32B on Arc B580
- Build a Raspberry Pi 4 AirPlay Receiver in 2026: Full Walkthrough
- Raspberry Pi Pico W Becomes a Driverless USB WiFi Adapter
- Can a Raspberry Pi 4 8GB Run a Local LLM with Ollama?
- Qwen 3.6 27B vs Sonnet 4.6: Local Agentic Benchmarks
- Best Mouse Pad for FPS and MOBA Esports Players (2026)
- Building a MAME Fighting Setup: Fight Stick + CF Storage for an Arcade Corner
- Intel Arc A770 LLM Performance: Local Inference Guide
- Pro-Level 180Hz 1440p Gaming Monitor for $159: Gigabyte Deal
- KOORUI vs Samsung Odyssey: Best 27" 4K Gaming Monitor?
- Best Force-Feedback Racing Wheel for PC in 2026: G29 vs HORI vs Thrustmaster
- Voodoo 3 3500 TV vs Voodoo 5 5500: Which Late-3dfx Card Should You Hunt For in 2026?
- Reviving the LAN Party in 2026: Arcade Sticks, Classic Consoles, and Local Multiplayer
- Voodoo 5 6000 Stability: Hangs, Wedges and a Bricked Board
- Qwen3 8B: Raspberry Pi 4 8GB vs RTX 3060 12GB (2026)
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget LLM + Gaming Build
- Best SSD for PS5 and Console-PC Hybrid Setups in 2026
- Windows 98 vs Windows 2000 for a GeForce-Era Retro Gaming Build
- Best 4K Monitor Under $400 for Console & PC Gaming 2026: SANSUI vs KOORUI vs ASUS TUF
- Ryzen 7 5800X vs Ryzen 9 3900X: Mistral Small 24B Offload (2026)
- Open-Source NVIDIA NVK Vulkan Driver Adds DLSS Support: What It Means for RTX 3060 Owners
- Can a Modern Sound Blaster G6 Replace an AWE64 for Retro PC Audio?
- Best Budget SSD for a Gaming PC in 2026: SATA vs NVMe
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090