Skip to main content
HumanCentric Mount for Dell OptiPlex Micro - VESA, Under Desk & Wall | Compatible with MFF 3040, 3046, 3050, 3060, 3070, 3080, 5050, 5060, 5070, 7040, 7050, 7060, 7070 & More
HumanCentric

HumanCentric Mount for Dell OptiPlex Micro

Bottom line: The HumanCentric Mount for Dell OptiPlex Micro ($34.99 on Amazon as of 2026-11-22 17:19 UTC): Fits a wide range of micro OptiPlex PCs, from the 3040 through the 7090; main trade-off: A VESA install uses the monitor's holes, which blocks a monitor arm or stand.

$34.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Fits a wide range of micro OptiPlex PCs, from the 3040 through the 7090
  • ✓ Accepts both 75 x 75 mm and 100 x 100 mm VESA patterns
  • ✓ Includes hardware for under-desk and wall mounting
  • ✓ Two Velcro straps hold the OptiPlex power adapter below the mount
  • ✓ Alternative to Dell mounts such as 482-BBBP and BHD-MFF-D7

Cons

  • ✗ A VESA install uses the monitor's holes, which blocks a monitor arm or stand
  • ✗ Does not fit OptiPlex mini tower, small form factor or Wyse models
  • ✗ Only fits Dell OptiPlex Micro PCs, not other brands' mini PCs
  • ✗ The monitor must have a four-hole VESA pattern

Manufacturer description

The HumanCentric Mount for Dell OptiPlex Micro takes your micro form factor PC off the desk and out of sight. It bolts to the back of a monitor with a 75 x 75 mm or 100 x 100 mm VESA pattern, or attaches to a standard monitor mount. Separate hardware is included for under-desk and wall installs. It fits the micro OptiPlex line, including the 3040, 3046, 3050, 3060, 3070, 3080, 5050, 5060, 5070, 5090, 7040, 7050, 7060, 7070, 7080 and 7090. The mount is sized for the 1.4" x 7" x 7.2" micro chassis. It does not fit OptiPlex mini tower, small form factor or Wyse models, so check that your unit…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for HumanCentric Mount for Dell OptiPlex Micro, so this read rests on the manufacturer's listed specs and the current price in the accessories category (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "Fits a wide range of micro OptiPlex PCs, from the 3040 through the 7090"; the main trade-off is "A VESA install uses the monitor's holes, which blocks a monitor arm or stand". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this mount fit my Dell OptiPlex 7090 Micro?

Yes. The listed compatible models include the micro OptiPlex 3040, 3046, 3050, 3060, 3070, 3080, 5050, 5060, 5070, 5090, 7040, 7050, 7060, 7070, 7080 and 7090. The mount is sized for the 1.4" x 7" x 7.2" micro chassis.

Does it work with an OptiPlex small form factor or Wyse thin client?

No. It only fits the micro form factor OptiPlex. The manufacturer says it does not fit OptiPlex mini tower, small form factor or Wyse models.

Can I still use my monitor arm if I mount the PC behind my monitor?

Not with the same VESA holes. When you mount the OptiPlex to the back of a monitor, this mount uses those holes, so you can't also attach a monitor arm or stand that needs them.

Which VESA patterns does it support?

It supports 75 x 75 mm and 100 x 100 mm VESA patterns and also attaches to standard monitor mounts. Check that your monitor has a four-hole VESA pattern before you buy.

Where does the Dell power adapter go?

Two included Velcro straps hold the OptiPlex power adapter below the mount. This works for VESA, under-desk and wall setups, and keeps the power brick and cables together.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Compatible models: Fits the micro Dell OptiPlex MFF 3000, 3040, 3046, 3050, 3060, 3070, 3080, 5000, 5050, 5060, 5070, 5090, 7000, 7020, 7040, 7050, 7060, 7070, 7080, 7090, and more. It Does not fit OptiPlex mini tower, small form factor, or Wyse models.
  • VESA mount Dell OptiPlex micro computers: Mount your micro OptiPlex to the back of a monitor with a 75 x 75 mm or 100 x 100 mm VESA patterns or to standard monitor mounts. Check to ensure your monitor has a four hole VESA pattern.
  • Other mount options: This mount also comes with mounting hardware for under desk and wall mount setups. This product only fits the micro form factor Dell OptiPlex micro PC mount. Compare to 482-BBBP, 452-BDEQ, 452-BDER, BHD-MFF-D7, mnt-odd-mff-d9.
  • Power adapter holder: Includes two Velcro straps that hold the OptiPlex power adapter below the mount. Keep your cables tidy and clean in all installation scenerios -- micro OptiPlex wall mount, micro OptiPlex VESA, and micro OptiPlex under desk.
  • Important note: If you are mounting the OptiPlex to the back of your monitor, this mount will use the VESA holes which means you won’t be able to mount to a monitor arm or monitor stand. Fits all Dell OptiPlex micro computers size 1.4" x 7" x 7.2".

Full Specifications

BrandHumanCentric
ColorBlack
MaterialAlloy Steel Aluminium
Set NameDell OptiPlex micro
Item Depth7.2 inches
Unit Count1 Count
Finish TypeBlack
Finish TypesBlack
Model Number101-2060
CompatibilityPC
Material TypeAlloy Steel Aluminium
Mounting TypeWall Mount
Manufacturer Part Number101-2060
Full listing titleHumanCentric Mount for Dell OptiPlex Micro - VESA, Under Desk & Wall | Compatible with MFF 3040, 3046, 3050, 3060, 3070, 3080, 5050, 5060, 5070, 7040, 7050, 7060, 7070 & More

Ready to buy?

HumanCentric Mount for Dell OptiPlex Micro - VESA, Under Desk & Wall | Compatible with MFF 3040, 3046, 3050, 3060, 3070, 3080, 5050, 5060, 5070, 7040, 7050, 7060, 7070 & More is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $34.99

*Price sourced from Amazon.com. Last updated 2026-11-22. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →