Skip to main content
XPG Pylon 750W 80 Plus Bronze Certified 120mm Fluid Dynamic Bearing Fan Power Supply (PYLON750B-BKCUS)
XPG

XPG Pylon 750W 80 Plus Bronze Certified 120mm Fluid Dynamic Bearing Fan Power Supply (PYLON750B-BKCUS)

Bottom line: The XPG Pylon 750W 80 Plus Bronze Certified 120mm Fluid Dynamic Bearing: 80 Plus Bronze certified with Japanese main capacitors for stable rails; main trade-off: non-modular cabling means unused leads stay in the case.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar power supplies

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ 80 Plus Bronze certified with Japanese main capacitors for stable rails
  • ✓ 120mm fluid dynamic bearing fan runs quieter and lasts longer than sleeve bearings
  • ✓ Full protection suite: OCP, OVP, UVP, OPP, SCP, OTP, NLO, SIP
  • ✓ Seven SATA connectors at 750W for drive-heavy builds

Cons

  • ✗ Non-modular cabling means unused leads stay in the case
  • ✗ Only one EPS 8-pin (4+4), so dual-EPS motherboards are out
  • ✗ 3-year warranty trails the 7-10 years on higher-tier units
  • ✗ Bronze efficiency lags Gold units on power draw and heat

Manufacturer description

The XPG Pylon 750W is a budget ATX power supply built around the parts that actually determine longevity: a 120mm fluid dynamic bearing fan spinning at 2,000 RPM and Japanese main capacitors, rated for a 100,000-hour MTBF at 25C. It carries 80 Plus Bronze certification and complies with Intel ATX 12V v2.4 timing (aligned to the v2.52 guidelines), so it drops into any standard mid-tower without adapter work. The 150 x 140 x 86mm chassis is a standard ATX footprint, and the 750W model ships with a single 24-pin, one EPS 8-pin (4+4) CPU connector, and seven SATA leads, which covers a single-GPU…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored XPG Pylon 750W 80 Plus Bronze Certified 120mm Fluid Dynamic Bearing… using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies category. XPG's power supplies lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Is 750W enough for an RTX-class gaming build?

The Pylon 750W supplies one EPS 8-pin (4+4) CPU connector and a 24-pin ATX, which fits a typical single-GPU, single-CPU gaming system. Check your specific GPU's manufacturer-recommended PSU wattage and PCIe connector count against the listing before buying.

Is the XPG Pylon 750W modular?

No. The Pylon is a fixed-cable unit, so all leads are permanently attached, including the seven SATA connectors on the 750W model. Plan for cable management behind the motherboard tray.

How loud is the fan?

XPG uses a 120mm fluid dynamic bearing fan with a 2,000 RPM rating. FDB fans generally run quieter and last longer than sleeve-bearing designs; the unit is specified at 100,000 hours MTBF at 25C.

What warranty comes with the XPG Pylon?

XPG lists a 3-year manufacturer warranty. Confirm the current terms and regional coverage on the product listing before purchase.

Will it fit my case?

The Pylon measures 150 x 140 x 86mm, a standard ATX power supply footprint, and follows the Intel ATX 12V v2.4 specification. Any case with a standard ATX PSU bay accepts it.

Key Features

  • 80 Plus Bronze Certified
  • 120mm FDB Fan to keep PSU running at low noise and helps to prolong PSU lifespan.
  • Main Japanese Capacitor to ensure durability and stability.
  • 4 Wattage selections: 450W / 550W/ 650W/ 750W
  • 3 Year manufacturer warranty

Full Specifications

BrandXPG
Wattage750 watts
Fan Size12 centimeters
Form FactorATX
Model Number75260140
Connector TypeSATA
Cooling MethodAir
Number of Fans1
Output Wattage750
Item Dimensions5.91 x 5.51 x 3.39 inches
Mfr Part NumberPYLON750B-BKCCN
Compatible DevicesPersonal Computer
Power Supply DesignNon-Modular
4 Wattage selections450W / 550W/ 650W/ 750W
Warranty Description3 Years Manufacturer on Parts
Maximum Input Voltage240 volts
Minimum Input Voltage100 volts
Item dimensions L x W x H5.91 x 5.51 x 3.39 inches
System Bus Connector Type24 Pin
Connector Type Used on CableSATA

Ready to buy?

XPG Pylon 750W 80 Plus Bronze Certified 120mm Fluid Dynamic Bearing Fan Power Supply (PYLON750B-BKCUS) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Supplies

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
XPG Pylon 750W 80 Plus Bronze Certified 120mm Fluid Dynamic Bearing Fan Power Supply (PYLON750B-BKCUS)
View on Amazon →