JCWINY 30 Inch Webcam Stand Camera Mount
Bottom line: The JCWINY 30 Inch Webcam Stand Camera Mount: Extends to 30 in / 76 cm for eye-level or overhead webcam shots; main trade-off: max load only 0.7 kg / 1.5 lb, not for DSLRs or heavy cameras.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Extends to 30 in / 76 cm for eye-level or overhead webcam shots
- ✓ 360-degree ball joint dials in any viewing angle
- ✓ Universal 1/4" mount fits Logitech C920/C922/Brio and GoPro Hero 4-8
- ✓ Clamp opens to 2.7"/7cm for thick desks, headboards, counters
- ✓ Non-slip cushion shields furniture from scratches
Cons
- ✗ Max load only 0.7 kg / 1.5 lb, not for DSLRs or heavy cameras
- ✗ Gooseneck can bounce unless bent into an S or Z shape
- ✗ Clamp may crack if over-tightened
- ✗ Needs a steady, wobble-free desk to avoid shake
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for JCWINY 30 Inch Webcam Stand Camera Mount, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the PC & gaming hardware category before committing. On the listing's own facts, the case for it is "Extends to 30 in / 76 cm for eye-level or overhead webcam shots"; the main trade-off is "Max load only 0.7 kg / 1.5 lb, not for DSLRs or heavy cameras". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, load rating and mounting or device compatibility in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Upgrade Thick Clamping Base】We have upgraded the clamp base. It is thicker and more durable. The clamping base is easy to be secured in place without the need to go overboard. Please place one hand over the clamp mount to move the goose-neck arm around.
- 【Adjustable Height and View】Up to the max 76cm / 30 inches. With gooseneck, makess it easier and flexible to operate and access different best height you want. 360-degree rotating ball joint on webcam Mount supports different best viewing angles. Please place one hand over the clamp mount to adjust the arm around.Please ensure that the desk using is steady with No wobble and it is very important to to minimize annoying bouncing while shooting and protects your valuable device from tipping over.
- 【Universal Compatibility】 The camera mount stand fits all devices with a 1/4'' screw hole, like for Logitech Webcam Brio 4K, C925e, C922x, C922, C930e, C930, C920, C615, action cameras, Gopros, Projectors, DSLRs, and etc.
- 【Wide Application】The web cam stand with an adjustable clamp base can open maximum to 2.7"/7cm, allow you securely clamp on the desk, headboard, nightstand, end table, kitchen counter, sideboard, etc. Non-slip cushion protects your furniture from scratches. The clamp mount of the base is easy to be secured in place without the need to go overboard. If over-tightened, it may crack.
- This Webcam Stand Max load weight 0.7kg /1.5 lb; Not for heavy Camera and devices. The webcam will be more stable if you bend the tube as "S" or "Z"to clamp on the desk when using the webcam stand. If you have any problem, please contact us at any time.
Full Specifications
| Brand | JCWINY |
|---|---|
| Color | Black |
| Shape | Rectangular |
| Weight | 0.7kg |
| Arm Length | 32 inches |
| Model Name | JCWINY-30Flex |
| Model Number | 762409116668 |
| Mounting Type | Clamp Mount |
| Mfr Part Number | 762409116668 |
| Compatible Devices | Cameras |
| Enclosure Material | Aluminum, Metal |
| Additional Features | webcam stand, webcam mount |
| Water Resistance Level | Not Water Resistant |
| Weight Capacity Maximum | 1.5 pounds |
| Full listing title | 30 Inch Webcam Stand Camera Mount, Upgraded Thick Base Flexible Gooseneck Camera Stand Desk Webcam Mount Clamp for Logitech Webcams C930e C930 C920 C922x C922 Brio 4K C925e C615, Gopro Hero 8 7 6 5 4 |
Ready to buy?
30 Inch Webcam Stand Camera Mount, Upgraded Thick Base Flexible Gooseneck Camera Stand Desk Webcam Mount Clamp for Logitech Webcams C930e C930 C920 C922x C922 Brio 4K C925e C615, Gopro Hero 8 7 6 5 4 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Gemma 4 31B on a 24GB GPU: RTX 3090 vs RTX 4090 vs RX 7900 XTX Quant Table (2026)
- Qwen3 32B on Apple M4 Max vs M4 Pro: tok/s and Memory per Quant (2026)
- Best Game Controller for PC in 2026: 5 Picks From DualSense to Arcade Stick
- Imaging Vintage IDE Drives in 2026: The Retro-PC Backup Workflow
- Sound Blaster Audigy 2 ZS vs Aureal Vortex 2: The Last Great Win98 Audio Battle
- Best $500-600 Gaming PC Build for a Ryzen/RX 6600 Rig
- Mistral Robostral Navigate: An 8B Model Steers Robots From One Camera
- Gemini-Class Models on Local Hardware: How Much VRAM You Actually Need
- Dump and Archive Your Retro PC's IDE Drives in 2026: A USB Adapter Workflow
- Self-Host Jellyfin on the Raspberry Pi 4 8GB: Transcoding Limits
- Why Local RAG Beats Cloud Agents at Follow-Up Questions on an RTX 3060
- Thinking Machines Drops Inkling, a 975B Open Model Leading US Labs
- GLM-5.2 With CPU Offload: Ryzen 7 5800X + RTX 3060 12GB Tested
- How Fast Is Local LLM Inference on a Ryzen 7 5800X (CPU-Only, No GPU)?
- Local LLM in VSCode: The 2026 Setup Guide
- Microsoft Now Points to 32GB RAM for Windows 11 Gaming — What It Means for Your Build
- Raspberry Pi Air Quality Sensor Guide: Setup & Sensor Picks
- GLM-5.2's Long-Horizon Agent Mode: Running It Locally in 2026
- Watercooled Gaming/Networking Rack: 2025 Build Guide
- Local AI on a Raspberry Pi in 2026: What Actually Runs (and What Doesn't)
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
- Ollama vs llama.cpp vs vLLM — which local LLM runtime wins in 2026?
- Gemma 4 31B Creative-Writing Finetunes on RTX 3060 12GB
- Linux Driver Will Expose Voltage Inputs on Raspberry Pi SBCs
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090