OkeMeeo Wall Mount for eero 6
Bottom line: The OkeMeeo Wall Mount for eero 6 ($11.99 on Amazon as of 2026-10-06): Screwless adhesive install - no drilling into drywall or rental walls; main trade-off: fits eero 6 dual-band only - not compatible with eero 6+.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Screwless adhesive install - no drilling into drywall or rental walls
- ✓ Screw holes included if you want a permanent mechanical anchor
- ✓ Cable routes underneath the bracket for a clean, hidden run
- ✓ Wall placement lifts the eero 6 higher for better signal spread
Cons
- ✗ Fits eero 6 dual-band only - not compatible with eero 6+
- ✗ Requires a 24-hour adhesive cure before the router can be placed
- ✗ Router not included - bracket only
- ✗ Single pack, so multi-node mesh setups need multiple orders
Manufacturer description
The OkeMeeo Wall Mount for eero 6 gets your mesh router off the desk and onto the wall without a single hole in your drywall. The bracket uses a strong adhesive backing that sticks to any vertical surface, so you can place your eero 6 higher and more centrally in a room for better signal coverage. If you prefer a permanent anchor, the same bracket accepts screws, giving you two install paths from one part. Cable routing is handled beneath the mount, so the power lead tucks out of sight and the finished install looks like part of the wall rather than an accessory bolted to it. Getting the…
SpecPicks Verdict
SpecPicks scored OkeMeeo Wall Mount for eero 6 using a rating × review-volume × price-fit model applied to published specs and reviews across the networking category. OkeMeeo's networking lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for networking of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this mount fit the eero 6+?
No. OkeMeeo lists this bracket as compatible with the eero 6 dual-band router only, and explicitly notes it is not for the eero 6+. Check the listing for mounts covering other eero models.
Do I have to drill holes in my wall?
No. The bracket installs with strong adhesive on a vertical surface, so no drilling is required. Screw installation is offered as a second option if you want a mechanical anchor.
How long before I can put the router on it?
Attach the mount to the vertical surface and let it sit for 24 hours before placing the eero 6 on it. That cure time lets the adhesive reach full hold.
Is the eero 6 router included?
No. This is the mounting bracket only - the router itself is not included. You are buying a single-pack mount for an eero 6 you already own.
Where does the power cable go?
The cable plugs in beneath the mount, so it runs down behind and under the bracket instead of looping out the side. That keeps the install looking tidy on an open wall.
Key Features
- Wall Mount for eero 6: Please attach it to vertical surface for 24 hours before putting router on it. Please check below detail page if you search mounts for other models
- Faster Response Rate: Mount for eero 6 dual-band anywhere near and high for easy setup of network and better signal
- Clutter Free, Perfect Unity: Cable can be plugged beneath the mount, simple design looks neat and clean
- Two-Way Easy Installation & No Hassle: No need to drill a hole. No need to worry about water splashing compared to putting it on desktop. it can be sticked onto vertical space or it can also be installed on wall by using screws.
- Built to Last: This adhesive holder for eero 6 dual-band is solid built. Feel free to contact us for any question. (NOT for eero 6+) The router itself is not included
Full Specifications
| Brand | OkeMeeo |
|---|---|
| Color | For eero 6 dual-band, 1Pack |
| Frequency | 5 GHz |
| Model Name | 341-eero6-J1Z |
| Unit Count | 1.0 Count |
| Connectivity | WiFi |
| Model Number | 341-eero6-J1Z |
| Built-In Media | Adhesive mount for eero 6, screws and anchors( Not for eero 6+) |
| Control Method | App |
| Mfr Part Number | 341-eero6-J1Z |
| Special Feature | 2-way Installation. Adhesive and with screws, Adhesive, For eero 6 only, not for eero 6+ |
| Antenna Location | Home, Office |
| Wi-Fi Generation | Wi-Fi 6 |
| Security Protocol | WPA2, WPA3 |
| Compatible Devices | for eero 6 (Not compatible with eero 6+) |
| Included Components | Adhesive mount for eero 6, screws and anchors( Not for eero 6+) |
| Is Modem Compatible | No |
| Router Network Type | wireless |
| Faster Response Rate | Mount for eero 6 dual-band anywhere near and high for easy setup of network and better signal |
| Frequency Band Class | Dual-Band |
| Full listing title | Wall Mount for eero 6, Screwless Strong Adhesive Bracket for eero 6 Mesh WiFi Router (1 Pack) (Not for eero 6+) |
Ready to buy?
Wall Mount for eero 6, Screwless Strong Adhesive Bracket for eero 6 Mesh WiFi Router (1 Pack) (Not for eero 6+) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Networking
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Self-Host Immich on a Raspberry Pi 4 8GB: SSD Boot, Power Draw, and Real Performance
- Best 32-Inch 4K Gaming Monitor for PS5 + PC 2026
- Local AI Server Build 2026: RAM, VRAM and NVMe for 13B+ Models
- Local LLM PC Build 2026: What 12GB of VRAM Really Runs
- This Retro Switch 2 Dock Looks Exactly Like an N64 — and Holds Six Cards
- Intel Axes BigDL: Local-LLM Picks for Consumer GPUs in 2026
- Noctua NH-U12S vs DeepCool AK620 for the Ryzen 7 5800X
- Hugging Face Says an AI Agent Breached Its Infrastructure
- Solar-Powered Bird Identifier: Raspberry Pi Zero 2W + AI Camera
- Best Gaming Gifts Under $60 in 2026
- Best First Upgrades for a Prebuilt Gaming PC in 2026
- Dumping and Imaging Vintage IDE and CompactFlash Drives in 2026: A Safe Workflow
- Ryzen 7 5800X + RTX 5060 Bundle Drops to $439 With a Free CPU Cooler
- Modern CRT Monitor for Retro Gaming: The 2025 Reality Check
- Codex Now Drives Windows PCs: The Local-Agent Rig You Can Build Instead
- Best Sim Racing Wheel + Shifter Combo Under $400 in 2026: 5 Setups for iRacing, ACC, and GT3
- DeepSeek Tops US AI Vendor Charts in June 2026 as Firms Chase Cheaper AI
- Unified RAM for LLMs: 2025-2026 Hardware Guide
- How to Image and Preserve a Vintage IDE Hard Drive in 2026 (CompactFlash + USB Adapter Workflow)
- Microsoft Now Recommends 32GB RAM for Gaming in 2026
- Best Streaming Gear for Twitch Beginners in 2026
- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026: Setup and Real Transcode Limits
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- Open-WebUI vs LM Studio: Best Local LLM Front-End in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090