JacobsParts 4-pin Molex Male to 2X 4-pin Molex Female Power Y-Splitter Extension Cable
Bottom line: The JacobsParts 4-pin Molex Male to 2X 4-pin Molex Female Power is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Also useful as a Molex extension cable
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Used and vintage listings vary by seller and condition — check the listing photos, description and return terms before buying
Manufacturer description
Split a single 4-pin Molex power connector into two so you can power more devices with your existing power supplyAlso useful as a Molex extension cable18 AWG copper wire8 Inches / 20cm
SpecPicks Verdict
SpecPicks scored JacobsParts 4-pin Molex Male to 2X 4-pin Molex Female Power… using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. JacobsParts's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Split a single 4-pin Molex power connector into two so you can power more devices with your existing power supply
- Also useful as a Molex extension cable
- 18 AWG copper wire
- 8 Inches / 20cm
Full Specifications
| Brand | JacobsParts |
|---|---|
| Gauge | 18.0 |
| Wattage | 120 watts |
| Plug Type | Type M |
| UL Listed | No |
| Unit Count | 1.0 Count |
| Item Length | 8 Inches |
| Plug Format | Type M |
| Model Number | LYSB00GQLPRT6-CMPTRACCS |
| Mfr Part Number | MLX-Y |
| Connector Gender | Male-to-Female |
| Special Features | Y-splitter extension |
| Number of Outlets | 2 |
| Has Extension Cord | Yes |
| Number Of Conductors | 2 |
| Power Cord Prong Count | 4 |
| Water Resistance Level | Not Water Resistant |
Ready to buy?
JacobsParts 4-pin Molex Male to 2X 4-pin Molex Female Power Y-Splitter Extension Cable is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Best Wired Controller for Fighting Games on PC (2026)
- Best SSD for a Raspberry Pi 5 Boot Drive in 2026
- Qwen3 4B on Raspberry Pi 4 8GB vs Ryzen 5 5600G: Which Cheap Always-On Box Wins?
- Can a 12GB RTX 3060 Run Gemma 4 31B? Quantization & Tok/s Reality Check
- AMD Ryzen AI Max 400 'Gorgon Halo': What 192GB of Unified Memory Unlocks for Local AI
- Ryzen 7 5700X + RTX 3060 12GB: A Balanced 1440p Build in 2026
- AMD Instinct MI300X vs Consumer GPUs: What Local AI Builders Should Buy in 2026
- Best Wireless Streaming Microphones for Twitch in 2026
- Best SSD and Controller Pairing for a Living-Room Gaming PC
- Best CPU Cooler for Ryzen 7 5800X Overclocking (2026)
- This DIY 'Steam Controller Puck' Emulates Xbox, Switch & PS Pads
- Best AM4 CPU for Gaming in 2026: 5 Ranked Picks
- 2000s LAN Party Modern Setup Guide: Hardware, Cables, and Server Stack in 2026
- GTX 1050 Ti vs Ryzen 5 2600 for Gemma 3 1B and Llama 3.2 1B
- Voodoo 3 3500 TV vs Voodoo 5 5500: Which Late-3dfx Card Should You Hunt For in 2026?
- Best SSD for PS4 Pro: SATA Upgrades That Actually Help
- Grok 4.5 at $0.31 a Task: When Cheap Cloud Beats a Local Build
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: What It Can Really Do
- AI-Assisted Sound Card Driver Install on Vintage WinXP: How a Vision LLM Automates the Sound Blaster Audigy FX
- Mini-ITX Gaming PC in a 3D Printed Case: 2026 Builder's Guide
- ComfyUI on an RTX 3060 12GB: VRAM Tuning and Image-Gen Throughput
- Run Text-to-SQL Locally on a 12GB GPU After Gemini-SQL2
- Best Raspberry Pi Alternative for Emulation (2025)
- How to Image and Preserve a Vintage IDE Hard Drive in 2026 (CompactFlash + USB Adapter Workflow)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090