Aypzuke
Aypzuke 3 Pack Computer PC PWM Fan Splitter Cable 1 to 3 (4 Pin+3 Pin)
Bottom line: The Aypzuke 3 Pack Computer PC PWM Fan Splitter Cable 1 to 3: Runs 3 case fans off one motherboard header per cable; main trade-off: only the 4-pin port carries true PWM; 3-pin fans run full speed.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Runs 3 case fans off one motherboard header per cable
- ✓ 26cm reach lets you route fans for a clean, tidy build
- ✓ Works with both 4-pin PWM and 3-pin fan connectors
Cons
- ✗ Only the 4-pin port carries true PWM; 3-pin fans run full speed
- ✗ Just one fan's tach/RPM signal reports back to the board
- ✗ 26cm can be short for routing in a large full-tower
- ✗ Splitting three fans onto one header raises its current draw
SpecPicks Verdict
SpecPicks scored Aypzuke 3 Pack Computer PC PWM Fan Splitter Cable 1 to 3 using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Aypzuke's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- this 4 pin pwm fan splitter cable with 26cm allow you make more choices to position your fans inside your computer case, which also make your computer case very clean and tidy
- this PC fan splitter cable could connects 3 computer case fans to a single motherboard fan header, which increases airflow in your computer case to reduce the accumulation of heat within the chassis
- this 4 pin fan splitter cable is compatible with 4pin PWM fan connector and 3pin fan connector, each pack of this fan splitter cable is with one of 4 Pin PWM Fan Connector + two of 3 Pin PWM Fan Connector
- This cost-effective 3 Pack of 4 pin fan splitter cables provide the more spare cable for adding fans to increase cooling in your computer case to ensure the operational speed of CPU
- Supports 3pcs of PWM fans in a single motherboard PWM header;Compatible with 4pin PMW fan connector and 3pin fan connector
Full Specifications
| Brand | Aypzuke |
|---|---|
| Color | Black |
| Model | 1 |
| Cable Type | PWM |
| Item Shape | Round |
| Model Name | 1 |
| Unit Count | 3 count |
| Part Number | 1 |
| Compatibility | PC |
| Connector Type | 4-pin and 3-pin Pwm Fan Connectors |
| Number of Pins | 4 |
| Outer Material | Nylon or plastic braided and covered with black sleeves |
| Maximum Voltage | 12 volts |
| Number of Items | 3 |
| Special Feature | Heat Resistant |
| Connector Gender | Male-to-Female |
| Specification Met | RoHS |
| Compatible Devices | PC |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Customer Package Type | FFP |
Ready to buy?
Aypzuke 3 Pack Computer PC PWM Fan Splitter Cable 1 to 3 (4 Pin+3 Pin) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi 4 8GB as a Local LLM Box: What Models Actually Run?
- Best Gaming Monitor for Console and PC Crossover (2026)
- Best SSD for PS5 Storage Expansion Under $100 (2026)
- Local AI on Raspberry Pi 5: Sourced Benchmarks for Llama, Phi, and Gemma (2026)
- Raspberry Pi 4 8GB vs Pi Zero W: Which Fits Your First Project?
- RX 7900 XTX 24GB vs RTX 4080 16GB for Local LLM Inference (2026)
- Best Sound Card and DAC for Competitive FPS Players in 2026
- ComfyUI on an RTX 3060 12GB: Flux and SDXL Speeds in 2026
- Modern PC Builds vs Period-Correct Retro Rigs: A 2026 Comparison
- Sub-$300 4K Mini-LED Gaming Monitors Hit the Mainstream
- Hackaday Europe 2026: Building a Retro PC From Scratch
- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLMs
- Can an RTX 3060 12GB Still Run 2026's Local LLMs?
- Running Mistral Leanstral 1.5 Locally on an RTX 3060 12GB
- DwarfStar Distributed Inference: Splitting a Single LLM Across a Home LAN of Mismatched GPUs
- Raycast FPS in COBOL: Can a 60-Year-Old Language Render 3D?
- Intel-Scaler vLLM 0.21.0: What the New Release Changes for Intel GPU Inference
- Best Budget Upgrades for a Ryzen Gaming PC in 2026
- Best Budget Gaming CPU Under $250 in 2026
- MLX engine comparison… and oMLX is the top choice.
- Best PlayStation Controller for PC Gaming in 2026
- Radeon Pro W7900 48GB vs RTX A6000 48GB for Local 70B Inference (2026)
- AMD Ryzen AI Halo vs RTX 3060 for Local LLMs in 2026
- Best Controller for RetroPie & Pi Emulation: SN30 Pro vs DualSense
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090