Cooler Master
Cooler Master Vertical GPU Card Holder Kit V3, PCIe 4.0 5.0 Motherboards GPUs RTX 5090 RX 9070 XT, ABS Casing, 165mm Length, Modula Adjustable for E-ATX ATX Micro ATX Case, White
As an Amazon Associate, SpecPicks earns from qualifying purchases.
*Price sourced from Amazon.com. Last updated 2026-09-20. Price and availability subject to change.
Bottom line: The Cooler Master Vertical GPU Card Holder Kit V3, PCIe 4.0 5.0 Motherboards GPUs RTX 5090 RX 9070 XT, ABS Casing, 165mm Length, Modula Adjustable for E-ATX ATX Micro ATX Case, White is a specs-and-price decision rather than a crowd-consensus one in the pc cases category, priced around $41.87. Check the specification table above against one or two close alternatives — on price and spec fit, not on star ratings.
Pros & Cons
Pros
- ✓ Backed by Cooler Master's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
PCIe 4.0 Riser Cable Works seamlessly with PCIe 4.0 and 5.0 motherboards and GPUs, delivering fast, reliable performance in gaming or creative tasks. Fits Standard ATX Cases Designed to handle modern 3-slot GPUs while fitting seamlessly into most traditional 7-slot ATX cases. Removable M-ATX Bracket Bracket can be removed to fit seamlessly into most traditional 4-slot Micro-ATX cases. Note: May block rear fan in some cases.
SpecPicks Verdict
SpecPicks scored Cooler Master Vertical GPU Card Holder Kit V3, PCIe 4.0 5.0… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the pc cases category. Cooler Master's pc cases lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for pc cases of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Frequently Asked Questions
Does this work with a PCIe 5.0 graphics card?
Yes. Cooler Master lists the V3 riser as working with PCIe 4.0 and 5.0 motherboards and GPUs, and names the RTX 5090 and RX 9070 XT specifically.
Will it fit a 3-slot GPU?
Yes. The kit is designed for modern 3-slot cards in traditional 7-slot ATX cases. Measure your case's side-panel clearance against the holder's 30mm of inward adjustment.
Can I use this in a Micro-ATX case?
Yes, by removing the M-ATX bracket, which lets it fit most traditional 4-slot Micro-ATX cases. Cooler Master notes this may block the rear fan in some cases.
How much can the holder be adjusted?
Up to 65mm horizontally and 30mm toward the side panel, all toolless. You can set the position first and install the GPU afterward.
Is this a well-reviewed mount?
It holds a 4.4 out of 5 star rating from 2,040 reviewers on the listing. Check the product page for current pricing, warranty terms, and case compatibility notes.
Key Features
- PCIe 4.0 Riser Cable Works seamlessly with PCIe 4.0 and 5.0 motherboards and GPUs, delivering fast, reliable performance in gaming or creative tasks.
- Fits Standard ATX Cases Designed to handle modern 3-slot GPUs while fitting seamlessly into most traditional 7-slot ATX cases.
- Removable M-ATX Bracket Bracket can be removed to fit seamlessly into most traditional 4-slot Micro-ATX cases. Note: May block rear fan in some cases.
- Toolless, Adjustable Easily adjusts up to 65mm horizontally and 30mm toward the side panel—no tools needed.
- Flexible Installation Allows the GPU to be installed after the holder is secured in your preferred position.
Full Specifications
| Size | GPU Kit V3 PCI-E 4.0 White |
|---|---|
| Brand | Cooler Master |
| Color | White |
| Model | MCA-U000R-WFVK03 |
| Warranty | 1 Year |
| UnitCount | 1 |
| ReleaseDate | 2023-02-21T00:00:01Z |
| Manufacturer | Coolermaster |
| ItemPartNumber | MCA-U000R-WFVK03 |
Ready to buy?
Cooler Master Vertical GPU Card Holder Kit V3, PCIe 4.0 5.0 Motherboards GPUs RTX 5090 RX 9070 XT, ABS Casing, 165mm Length, Modula Adjustable for E-ATX ATX Micro ATX Case, White is available on Amazon with Prime shipping and the full Amazon returns policy. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
View Current Price on Amazon →
*Price sourced from Amazon.com. Last updated 2026-09-20. Price and availability subject to change.
Related PC Cases
Cooler Master Vertical GPU Card Holder Kit V3 head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Game Controller for PC in 2026: 5 Picks From DualSense to Arcade Stick
- Build a Raspberry Pi Zero W Cyberdeck in 2026: BOM + Wiring Guide
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: What It Can Really Do
- RTX 5080 vs RX 9070 XT
- Best CPU Cooler for AM4 Ryzen Overclocking (2026 Edition)
- 1999 Dream Build Reborn: Voodoo3, Pentium III, CF Storage
- Raspberry Pi LLM Projects: What Actually Runs in 2026
- Datacenter GPU in a Gaming PC for £200: Is It Worth It?
- Claude Code Telemetry Flap: Why a Local RTX 3060 Rig Is the Privacy Play
- Best Gaming Headset Under $50 for Console + PC (2026)
- Thrustmaster TH8A vs the G29's Stock Shifter: Is a Standalone H-Pattern Worth It?
- What Handheld Console Should I Buy in 2026? A Decision Framework
- 3dfx Voodoo5 5500 AGP Install Guide: Glide, 4-Sample FSAA, and the Last Great 3dfx Driver Stack for Win98SE
- DFlash Speculative Decoding on Qwen3.5-35B-A3B: How an RTX 2080 Super 8GB Hits 60+ tok/s
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Game Streaming in 2026
- Baidu Unlimited OCR Runs Locally: Document AI on an RTX 3060 12GB
- AMD Ryzen AI Max+ 'Gorgon Halo' 192GB: What 192GB Unified Memory Means for Local LLMs
- Dual RTX 3090 Ti in 2026: Worth It vs. the Alternatives?
- Raspberry Pi 5 Projects Worth Building in 2026
- Best SSD for Steam Deck and Handheld Gaming Storage Expansion 2026
- Athlon XP + Radeon 9800 Pro AGP Build Guide: 2003 Period-Correct Rig
- CUDA 13.3 and the RTX 3060: What Changes for Local LLM Inference
- Best SSDs & Cloning Tools for Gaming PC Upgrades 2026
- Best Gaming Webcam and Microphone Bundle for Streamers in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090