elechawk
5 Pairs JST-XH 2.54mm 2 Pin 1S Balance Plug Lead Socket Male and Female Connector with 20cm (7.9inch) Silicone Wire Cables for Woodland Just Plug Lights 3D Printer
*Price sourced from Amazon.com. Last updated 2026-05-26. Price and availability subject to change.
Bottom line: The 5 Pairs JST-XH 2.54mm 2 Pin 1S Balance Plug Lead Socket Male and Female Connector with 20cm (7.9inch) Silicone Wire Cables for Woodland Just Plug Lights 3D Printer is a solid pick with broad community endorsement in the power supplies & cables category, priced around $7.99, rated 4.5★ across 40 verified Amazon reviews. A solid choice — worth comparing against one or two close alternatives first.
Package included:5 pcs female cables, 5 pcs male cables, 5 pcs top entry sockets, 5 pcs side entry socketsFeatures:DIY special 1S lithium battery, special balance charging line, B6 balance charging plug, lithium battery conversion line.Specification:●Silicone insulated cable●22AWG wire●20cm (7.9 inch) long●JST-XH connector
SpecPicks Verdict
SpecPicks classifies 5 Pairs JST-XH 2.54mm 2 Pin 1S Balance Plug Lead Socket Male and… as a solid pick with broad community endorsement in the power supplies & cables category, based on 40 verified Amazon reviews and our ranking model that weights rating × review-volume × price-fit. elechawk's positioning sits comfortably above the category median. Use the Compare tool to put it side-by-side with two or three close alternatives before clicking through to Amazon.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Pros & Cons
Pros
- ✓ Highly rated — 4.5★ average across customer reviews
- ✓ JST-XH connectors and sockets are suitable as a power line for your project like Arduino
- ✓ Backed by elechawk's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Limited review volume so far — fewer data points on long-term reliability
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
Key Features
- Included: 5 pcs female cables, 5 pcs male cables, 5 pcs top entry sockets, 5 pcs side entry sockets
- JST-XH connectors and sockets are suitable as a power line for your project like Arduino
- Suitable for Woodland Scenics Just Plug: Lights & Hub Set and Expansion Hub and 3D printer connector plug wire
- 22AWG cable can work with enough current. 20cm (7.9 inch) long
- The silicone wire is very soft and high temperature resistance
Full Specifications
| Brand | elechawk |
|---|---|
| Included | 5 pcs female cables, 5 pcs male cables, 5 pcs top entry sockets, 5 pcs side entry sockets |
| Material | Copper, Silicone |
| Cable Type | silicone wire |
| Unit Count | 10.0 Count |
| Material Type | Copper, Silicone |
| Wire Diameter | 0.64 Millimeters |
| Connector Type | Jst-xh |
| Item Dimensions | 3.54 x 5.12 x 0.47 inches |
| Item dimensions L x W x H | 3.54 x 5.12 x 0.47 inches |
| Suitable for Woodland Scenics Just Plug | Lights & Hub Set and Expansion Hub and 3D printer connector plug wire |
Ready to buy?
5 Pairs JST-XH 2.54mm 2 Pin 1S Balance Plug Lead Socket Male and Female Connector with 20cm (7.9inch) Silicone Wire Cables for Woodland Just Plug Lights 3D Printer is available on Amazon with Prime shipping and the full Amazon returns policy. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-05-26. Price and availability subject to change.
Related Power Supplies & Cables
