Facmogu 24V 5A Power Adapter
Bottom line: The Facmogu 24V 5A Power Adapter: Full 24V/5A (120W) output for LED strips, amp boards, and 3D printer projects; main trade-off: hard 5A ceiling: devices drawing more than 5A won't run properly.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Full 24V/5A (120W) output for LED strips, amp boards, and 3D printer projects
- ✓ Universal 100-240V 50/60Hz input works on overseas mains
- ✓ 5.5x2.5mm plug also fits 5.5x2.1mm jacks via center spring contact
- ✓ UL certified with over-voltage, over-current, and over-temperature protection
- ✓ 6.99 ft (213cm) total cable length for flexible placement
Cons
- ✗ Hard 5A ceiling: devices drawing more than 5A won't run properly
- ✗ Needs a clear, hard surface for cooling; keep off carpets and fabric
- ✗ Indoor use only; not rated for outdoor LED installs
- ✗ Center-positive only; reverse-polarity gear needs an adapter
SpecPicks Verdict
SpecPicks scored Facmogu 24V 5A Power Adapter using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. Facmogu's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【IMPORTANT NOTE】-- Compatible with 24V DC equipment, please make sure that the output voltage of your electronic device is 24V and the output current is less than or equal to 5A, the rated power is within the range of 120W! This is a 5A power converter. If a product exceeding 5A is connected, which will cause not working properly. The power supply requires adequate palce for heat dissipation, Place on hard, flat surface with clearance. Keep away from soft surfaces (beds, carpets), fabrics, and rubber to prevent overheating.
- 【Power Specifications】-- Power Supply with Input AC100-240V- 50/60Hz and Output: DC 24V/5A (5000mA), 213cm (6.99 feet) Total Cable Length. Indoor use only!
- 【Plug Design】-- Fit for both 5.5x2.5mm & 5.5x2.1mm plug. This cable terminates with a "standard" 5.5mm OD, 2.5mm ID DC plug, but it's also compatible with DC 5.5x2.1mm socket with the inner center spring contact. (NOTEPower Supply Polarity: Center or Tip is positive (+), Sleeve is negative(-).
- 【Built-in Power Supply Protection】-- Certified by UL, it ensures safe use with over voltage, over current, and over temperature protection to keep all of your mobile devices safe from unexpected surges and spikes. Wide voltage range from 100V to 240V makes it suitable for travel.
- 【Wide Applications】-- 24V 5A Power adapters are in high demand for audio amp boards, portable powered speakers, cable boxes, LED light strips, wireless routers, ADSL Cats, DC motors, 3D printers, computer projects, HUB, Switches, audio/ video power supply, and Arduino controllers to provide a safe and stable power supply for your creation.
Full Specifications
| Brand | Facmogu |
|---|---|
| Color | Black |
| Current | DC |
| Wattage | 120 watts |
| Amperage | 5 Amps |
| Portable | No |
| Plug Type | Type A |
| Model Name | Power Adapter |
| Power Plug | Type A - 2 pin (North American) |
| Unit Count | 1.0 Count |
| Form Factor | Compact |
| Connectivity | Wireless |
| Model Number | A20114-MG-US |
| Power Source | Corded Electric |
| Input Voltage | 24 Volts |
| Mounting Type | Wall Mount |
| Built-In Media | Power Adapter |
| Connector Type | Barrel Connector |
| Output Current | 6 Amps |
| Output Voltage | 24 Volts |
| Full listing title | Facmogu 24V 5A Power Adapter, 120W 110-240V AC to DC 24V Transformer, 24 Volts DC Power Supply for LED Light, 120W Switching Transformer 5.5x2.5mm & 5.5x2.1mm DC Plug Converter |
Ready to buy?
Facmogu 24V 5A Power Adapter, 120W 110-240V AC to DC 24V Transformer, 24 Volts DC Power Supply for LED Light, 120W Switching Transformer 5.5x2.5mm & 5.5x2.1mm DC Plug Converter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best SATA SSDs Under $100 in 2026: 5 Picks for Boot Drives, Upgrades, and Retro PCs
- Best Components for a Budget Local-LLM Workstation in 2026
- Anthropic's Fable 5 Ban and Jailbreak: What It Means for Local-LLM Resilience
- Best Quiet PC Upgrades for Apartment Gaming in 2026
- Ryzen 7 5800X vs 5800X3D for 1440p Gaming: Which Should You Buy?
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Homelab and Virtualization Box in 2026
- Self-Hosting Jellyfin on a Raspberry Pi 4 8GB: Real Performance
- Claude Opus 4.8 Takes #1 on the Artificial Analysis Intelligence Index at 61.4
- KOORUI 27" 4K QD-Mini LED: Is a Budget 4K Gaming Monitor Enough for an RTX 3060?
- Is the RTX 5050 Really as Bad as Everyone Says?
- How Creative Killed Aureal: The 1999 Patent War, Audigy's Lineage, and Why Consumer PC Audio Stagnated for…
- GeForce 4 Ti 4600 AGP in 2026: Period-Correct Win98 Install Guide
- AMD Ryzen AI Halo: Pre-Orders Open for Linux Developers
- Best Raspberry Pi Alternative for Home Assistant (2026)
- Best Classic Retro RPGs to Play in 2026 (Top 15)
- Alienware AW3426DW Review: QD-OLED Ultrawide Gaming at $699
- Logitech G502 Hero vs SteelSeries QcK: The Cheap FPS Setup That Still Wins in 2026
- Run Qwen 3.6 27B Locally: What Fits on 12GB in 2026
- Run Local LLMs on a Ryzen 5 5600G With No GPU (2026)
- Ryzen 5600G vs 5700X vs 5800X: Best CPU for a 1080p Gaming Build (2026)
- Qwen 3.6 35B-A3B vs Qwen 3.6 27B Dense: Which Local LLM Wins on a Single 24GB GPU?
- Running Qwen3 35B A3B at 80 tok/s on a 12GB RTX 3060 in 2026
- Kimi K3 Lands #5 on Coding Agents: What You Can Actually Run Local
- Best Gaming Controller for PC and Console in 2026: 5 Picks Compared
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090