Serial Bus Servo Driver Board for ST/SC Series Serial Bus Servos Up to 253
Bottom line: The UeeKKoo Serial Bus Servo Driver Board is a specs-and-price decision rather than a crowd-consensus one in the displays & upscalers category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by UeeKKoo's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored UeeKKoo Serial Bus Servo Driver Board using a rating × review-volume × price-fit model applied to published specs and reviews across the displays & upscalers category. UeeKKoo's displays & upscalers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for displays & upscalers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Serial Bus Servo Driver Board: Integrates Servo Power Supply And Control Circuit, Applicable for ST/SC Series Serial Bus Servos, Small In Size, Easy to Integrate.
- Compatible Servos: Supports ST/SC series bus servos, and can directly power the servos via DC power jack, supports selecting power supply input according to the servo used. Support ST3020 Servo, SC09 Servo, SC15 Servo, ST3215-HS Servo Motor, ST3215 Servo, ST3025 Servo.
- UART Serial Bus Control: Allows controlling up to 253 SC/ST series serial bus servos at the same time, supports receiving the operating status and various information feedback of each servo.
- Easy to Use with USB Control: Connect the driver board to the host via a USB cable to easily control the serial bus servo and receive data feedback, speeding up the project prototyping process.
- Suitable for More Applications via UART: Supports directly controlling the serial bus servo via UART communication, and provides SDK which is compatible with various hardware platforms, please refer to the product's Wiki for more details.
Full Specifications
| Brand | UeeKKoo |
|---|---|
| Platform | Custom |
| Model Name | Serial Bus Servo Driver Board |
| Unit Count | 1 Count |
| Connectivity | USB |
| Model Number | Serial Bus Servo Drive Board |
| Built-In Media | Bus Servo Adapter (A) x1 |
| Mfr Part Number | Serial Bus Servo Drive Board |
| Number of Items | 1 |
| Number of Packs | 1 |
| Number of Ports | 2 |
| Total USB Ports | 1 |
| Total Usb Ports | 1 |
| Compatible Devices | Raspberry Pi, Jetson Orin Nano, PC, ESP32 |
| Warranty Description | Technical Support is provided |
| Compatible Processors | Raspberry Pi BCM2835, BCM2836, BCM2837, BCM2711, Jetson Orin NX, Intel, AMD, ESP32 Tensilica Xtensa LX6 |
| Memory Slots Available | Serial Bus Servo Drive Board |
| Graphics Card Interface | Integrated |
| Main Power Connector Type | DC5521 power jack |
| Serial Bus Servo Driver Board | Integrates Servo Power Supply And Control Circuit, Applicable for ST/SC Series Serial Bus Servos, Small In Size, Easy to Integrate. |
Ready to buy?
Serial Bus Servo Driver Board for ST/SC Series Serial Bus Servos Up to 253 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Displays & Upscalers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen 7 5700X vs 5800X for a 2026 Gaming and Streaming Build
- GeForce 4 Ti 4600 + Pentium 4 Northwood: Period-Correct 2002 Build Guide
- Best Webcam for Twitch Streaming on a Budget in 2026
- How to Find and Join Active Quake 3 and UT99 Servers in 2026
- STEPLA-1 8-Bit Hardwired CPU: 74-Series Logic Explained
- MTP in llama.cpp: The Regression, the Fix, and the KV-Cache Free Lunch
- Best Sim Racing Wheel for Forza on Xbox + PC 2026
- Best Budget SSD for 2026: 5 SATA and NVMe Picks
- Build a Privacy-First Ring Alternative on a Raspberry Pi 4 in 2026
- vLLM vs llama.cpp on a 12GB GPU: Which Serves Local LLMs Faster?
- First Homelab Setup: Hardware, Security & Networking Guide
- Using a Raspberry Pi 5 with AI to Recover Lost Windows 98 INF Files (2026)
- Legion Go vs Steam Deck vs ROG Ally: 2026 Buying Guide
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5070
- Best Budget GPU for Local Stable Diffusion and ComfyUI in 2026
- AMD Challenges Nvidia DGX Spark with $3,999 Ryzen AI Halo
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
- Forza Horizon 6 Is the Highest-Rated Game of 2026: What Metacritic's 94 Says About Where Racing Sims Are Going
- Benchmarking Open Models for Tool-Use on a Budget RTX 3060 Rig
- Best GPU for 1080p Gaming in 2026: Where the RTX 3060 12GB Lands
- Best GPUs for 1440p Gaming in 2026
- Best Budget GPU for Stable Diffusion: Why the RTX 3060 12GB Still Wins
- 16% of Freelance Jobs Are Now AI-Doable: The Local Agent Rig That Runs Them
- Quantization on a 12GB GPU: q4 vs q5 vs q8 Tok/s and Quality on the RTX 3060
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090