Ikpek
Ikpek 10 Pack 2K3 Ohm Potentiometer Replacement for Sony PlayStation 5 PS5 Controller
Bottom line: The Ikpek 10 Pack 2K3 Ohm Potentiometer Replacement is a specs-and-price decision rather than a crowd-consensus one in the controllers & gamepads category, priced around $9.99 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 【A Set of Tools】-- Helps to disassemble Controller and install more convenient.
- ✓ Backed by Ikpek's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
【What you get】-- 10 x Potentiometer, 1 x Screwdriver (Phillips #00), 1 x Tweezer, 1 x Spudger, 1 x Pry tools, 1 x Pry bar.
SpecPicks Verdict
SpecPicks scored Ikpek 10 Pack 2K3 Ohm Potentiometer Replacement using a rating × review-volume × price-fit model applied to published specs and reviews across the controllers & gamepads category. Ikpek's controllers & gamepads lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for controllers & gamepads of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【Compatible model】-- 2K3 Ohm Potentiometer Only Compatible with PS5 Controller (NOT FIT for PS4 Xbox One Xbox One S/X Controller).
- 【What you get】-- 10 x Potentiometer, 1 x Screwdriver (Phillips #00), 1 x Tweezer, 1 x Spudger, 1 x Pry tools, 1 x Pry bar.
- 【Solve Most Joystick Problem】-- Stick drift, stuttering, dead zones, creeping, blind spots, non centered.
- 【Attentions】-- This product will require moderate soldering to install. Please search for installation videos on youtube above before purchasing.
- 【A Set of Tools】-- Helps to disassemble Controller and install more convenient.
Full Specifications
| Brand | Ikpek |
|---|---|
| Color | Turquoise |
| Compatibility | PS5, PS4, Xbox |
| Compatible Devices | PS5 Controller |
| Full listing title | 10 Pack 2K3 Ohm Potentiometer Replacement for Sony PlayStation 5 PS5 Controller, Trim Pot Resistor Module Sensor for Dualsense ALPS Analog Joystick |
Ready to buy?
10 Pack 2K3 Ohm Potentiometer Replacement for Sony PlayStation 5 PS5 Controller, Trim Pot Resistor Module Sensor for Dualsense ALPS Analog Joystick is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Controllers & Gamepads
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026? Ollama tok/s + SSD-Boot Setup
- Secluso: Private DIY Home Security on a Raspberry Pi 4
- Best Mouse and Mousepad for FPS Aim Training in 2026
- How to run DeepSeek-R1 32B on AMD Radeon RX 7900 XTX
- Best Game Streaming Starter Kit in 2026: Mic, Light, and Capture
- Raspberry Pi Home Automation Projects: A 2025 Starter Guide
- KOORUI 27" 4K QD-Mini LED vs Samsung Odyssey 27" 4K: Which 4K Gaming Monitor Wins?
- Best 27-Inch 4K Gaming Monitor: KOORUI QD-Mini LED vs Samsung Odyssey
- Why Nvidia Killed 3dfx — and How Voodoo Still Shapes Every GPU Launch
- Qwen3.6-35B-A3B vs Gemma4-26B-A4B: Which MoE Fits a 12GB RTX 3060
- GameSir G7 SE vs 8BitDo Pro 2: Best Wired-vs-Wireless PC Controller
- Microsoft Now Points to 32GB RAM for Windows 11 Gaming — What It Means for Your Build
- Can a Raspberry Pi 4 8GB Run a Local LLM in 2026? Real tok/s and What Fits
- Best Hardware for Running Qwen3 Locally in 2026
- 21 GPU's benchmarked running a small TTS model (vram peak: 5GB)
- ViewSonic VX2730D-4K Review: 4K Gaming at 163 PPI and 144Hz
- Best Quiet CPU Cooler for Silent Workstation and Office Builds 2026
- Ryzen 5 5600G vs Intel i7-9700K for Budget Gaming in 2026
- Best Wireless Productivity Keyboards for Home Office in 2026
- CompactFlash and IDE-to-USB Adapters for Retro PC Builds in 2026
- Ryzen 7 5800X vs Ryzen 5 5600G for Gaming and Streaming
- Anker's Thus Chip Claims 150x AI Boost: No Benchmarks Yet
- Ryzen 9 9950X3D vs Core Ultra 9 285K
- RTX 3060 12GB vs Ryzen 5 5600G iGPU: Do You Need a GPU for 1080p Esports?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090