BONTEC

BONTEC Dual Monitor Stand for 15-38 Inch Screens

Name: BONTEC Dual Monitor Stand for 15-38 Inch Screens, Gas Spring Adjustable Monitor Arm, Full Motion VESA 75x75/100x100mm Desk Mount with Tilt, Swivel
Brand: BONTEC
SKU: B0FJDG6FB7

Status: BONTEC Dual Monitor Stand for 15-38 Inch Screens: Unavailable on Amazon as of 2026-10-07 04:29 UTC. SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

🛒 Search eBay for this model

Bottom line: The BONTEC Dual Monitor Stand for 15-38 Inch Screens: Handles 15-38 inch screens up to 26.5 lbs per arm, room for heavy ultrawides; main trade-off: only fits VESA 75x75 and 100x100mm, so 200mm-pattern monitors need an adapter.

Unavailable on Amazon as of 2026-10-07 04:29 UTC

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: MOUNT PRO Dual Monitor Stand — $29.99 on Amazon as of 2026-10-07 04:28 UTC (price may vary).

View Current Price — $29.99

Similar: UPGRAVITY 3 Monitor Desk Mount for 17 to 32 inch… — $35.19 on Amazon as of 2026-10-06 22:25 UTC (price may vary).

View Current Price — $35.19

Similar: HUANUO Quad Monitor Mount for 13-32 Inch Screens — $42.74 on Amazon as of 2026-10-06 22:13 UTC (price may vary).

View Current Price — $42.74

Original listing (currently unavailable) → Compare to similar home & kitchen

By Mike Perry, Founder & Editor-in-Chief · Listing data updated 2026-10-07

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. About the author →

Pros & Cons

Pros

✓ Handles 15-38 inch screens up to 26.5 lbs per arm, room for heavy ultrawides
✓ Height range spans 7.1 to 19.1 inches for true eye-level positioning
✓ 23.3 inch max extension reaches across deep desks
✓ 360-degree rotation supports portrait mode for code and documents
✓ Zinc alloy build tested through 30,000 movement cycles

Cons

✗ Only fits VESA 75x75 and 100x100mm, so 200mm-pattern monitors need an adapter
✗ Gas spring tension usually needs re-tuning each time you swap monitor weights
✗ C-clamp limited to desks 0.39-2.76 inches thick, ruling out very thick tops
✗ Snap-fit clips route cables but do not fully enclose them

Manufacturer description

The BONTEC Dual Monitor Stand handles two screens from 15 to 38 inches on a single desk footprint, with each gas spring arm rated for displays up to 26.5 lbs. That capacity headroom matters if you run heavy 34-inch ultrawides or older thick-bezel panels that lighter arms sag under. Mounting uses standard VESA 75x75mm or 100x100mm patterns, so most office and gaming monitors bolt straight on. Positioning is where this BONTEC monitor arm earns its keep. You get +85 to -50 degrees of tilt, plus or minus 90 degrees of swivel, full 360-degree rotation for portrait work, and a height range from…

SpecPicks Verdict

SpecPicks scored BONTEC Dual Monitor Stand for 15-38 Inch Screens using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. BONTEC's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this fit my 34-inch ultrawide monitors?

Yes. The arms support screens from 15 to 38 inches, so a 34-inch ultrawide is within range as long as each display weighs 26.5 lbs or less and uses a VESA 75x75mm or 100x100mm mounting pattern.

How much weight can each arm hold?

Each gas spring arm is rated for monitors up to 26.5 lbs, which BONTEC states is 33 percent above standard mounts in this class.

Can I rotate a monitor to portrait orientation?

Yes. Each arm offers 360-degree rotation, along with plus or minus 90 degrees of swivel and a tilt range of +85 to -50 degrees.

Does it clamp to my desk or require drilling?

Both options are included. A C-clamp mounts without drilling, or a grommet base installs through an existing hole. Either fits desks 0.39 to 2.76 inches thick.

How high can it raise my monitors?

The height adjustment range runs from 7.1 to 19.1 inches above the desk surface, and the arms extend up to 23.3 inches outward for depth positioning.

Key Features

WIDE COMPATIBILITY FOR MULTIPLE SCREENS – BONTEC dual monitor stand fits 15–38 inch screens up to 26.5 lbs, 33% higher capacity than standard mounts. Supports VESA 75x75mm and 100x100mm, and works as a dual monitor arm stand, desk monitor mount for 2 monitors, or computer monitor mount for office, home office, gaming, or study setups
Ergonomic Design with Enhanced Height Range – Full motion gas spring arm offers +85° to -50° tilt, ±90° swivel, 360° rotation, and a superior height adjustment range from 7.1" to 19.1", 21% taller than typical arms; promotes better posture and reduces neck, back, and eye strain. Great for home office, gaming, creator workstations, or study desks
Reinforced Arm Structure for Maximum Stability – Constructed with high-grade zinc alloy and tested for 30,000 cycles, this dual monitor mount features a 33% longer and thicker rear segment to prevent sagging and slipping, delivering long-term durability for heavier screens
EXTENDED REACH WITH ORGANIZED SETUP – Features a 23.3" max extension, 33% longer than standard arms, for flexible monitor positioning even on deep desks. Built-in cable management with snap-fit clips keeps HDMI, power, and data cords neatly secured for a cleaner, more organized workspace
Simple Installation with Premium Finish – Installs easily using C clamp or grommet base for desks 0.39–2.76 inches thick; matte black scratch-resistant finish resists daily wear and cleans effortlessly, maintaining a sleek look in any modern office or gaming setup

Full Specifications

Brand	BONTEC
Color	Black
Material	Metal
Model Number	GDM7506-FBA
Mounting Type	Tabletop Mount
Movement Type	Swivel
Mfr Part Number	GDM7506-FBA
Number of Items	1
Number of Packs	1
Compatible Devices	Monitor
Enclosure Material	Metal
Maximum Tilt Angle	90 degrees
Maximum-Supported Screen Size	34 inches
Minimum-Supported Screen Size	15 inches
Full listing title	BONTEC Dual Monitor Stand for 15-38 Inch Screens, Gas Spring Adjustable Monitor Arm, Full Motion VESA 75x75/100x100mm Desk Mount with Tilt, Swivel, Rotation, Ergonomic Design for Home Office or Gaming

Ready to buy?

Amazon shows no buyable offer for BONTEC Dual Monitor Stand for 15-38 Inch Screens at the last check. A similar in-stock product is MOUNT PRO Dual Monitor Stand. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $29.99