ErGear Single Monitor Arm
Bottom line: The ErGear Single Monitor Arm ($25.48 on Amazon as of 2026-10-07): Handles 13-34 inch screens up to 19.8 lbs on VESA 75x75 or 100x100; main trade-off: 19.8 lb ceiling rules out many heavy 34-inch ultrawides and curved panels.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Handles 13-34 inch screens up to 19.8 lbs on VESA 75x75 or 100x100
- ✓ 22.6 in height range and 20.6 in horizontal reach from the extra column
- ✓ Full 360-degree rotation makes portrait mode workable, not just possible
- ✓ VESA plate is 40% wider than the prior version, cutting wobble and sag
- ✓ C-clamp and VESA screws hand-tighten, so no tools needed to install
Cons
- ✗ 19.8 lb ceiling rules out many heavy 34-inch ultrawides and curved panels
- ✗ C-clamp only, so no grommet mount option for desks without a free edge
- ✗ Anti-slip padding needs a flat desk edge; thick or beveled tops complicate it
- ✗ Gas-spring tension rating is not published, so heavy-screen droop is unverified
Manufacturer description
Mount a 13-34 inch display and reclaim the desk space underneath it. The ErGear Single Monitor Arm clamps to your desk with an integrated C-clamp lined with anti-slip silicone padding, spreading the load across a wider contact area so a 19.8 lb screen stays where you put it. The extra column pushes height adjustment to 22.6 inches and horizontal reach to 20.6 inches, which is enough travel to pull a 34-inch ultrawide forward for detail work and push it back for a movie. Articulation covers +80 to -50 degrees of tilt, plus-or-minus 90 degrees of swivel, and full 360-degree rotation, so…
SpecPicks Verdict
SpecPicks scored ErGear Single Monitor Arm using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. ErGear's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this hold a 34-inch ultrawide monitor?
It is rated for 13-34 inch screens up to 19.8 lbs. Check your monitor's weight without its stand first, since many 34-inch ultrawides exceed 19.8 lbs.
Does it fit VESA 100x100 mounting holes?
Yes. The arm supports both VESA 75x75mm and 100x100mm patterns, which covers the majority of standard desktop monitors.
Can I rotate the monitor to portrait mode?
Yes. The mount allows full 360-degree rotation, so portrait orientation works, along with plus-or-minus 90-degree swivel and +80 to -50 degree tilt.
How far can it extend and raise the screen?
An additional column gives up to 22.6 inches of height adjustment and 20.6 inches of horizontal extension from the mounting point.
Do I need tools to install it?
No. The integrated C-clamp and the VESA plate screws both hand-tighten. Confirm your desk has a clear, flat edge for the clamp before ordering.
Key Features
- Wide Compatibility: This monitor arm supports a wide range of monitors from 17″ to 34″, with VESA 75x75mm and 100x100mm mounting patterns. The monitor mount is capable of holding up to 19.8 lbs, making the VESA monitor mount ideal for most standard-sized displays.
- Extended Adjustability: With an additional column, this single monitor arm allows for impressive height adjustments up to 22.6″ and horizontal extension up to 20.6″. Tilt your monitor +80° to -50°, swivel it ±90° and rotate it 360° to find the perfect position. Even in portrait mode, the desk monitor mount allows 360° free rotation, ensuring your monitor aligns with eye level for optimal viewing angles and better ergonomics.
- Enhanced Stability: Featuring a high-quality integrated C-clamp with anti-slip silicone padding, this monitor stand ensures a larger contact area with your desk for added stability. The redesigned VESA plate is 40% wider, providing a snug fit and reducing screen wobbling and sagging. The arm and post connection is also gap-free, ensuring a secure and stable mount.
- Easy Installation: Forget about complicated setups! This monitor desk mount features an integrated C-clamp and VESA plate screws that can be easily tightened by hand, ensuring a quick and hassle-free installation process without the need for additional tools.
- Upgraded Cable Management: Say goodbye to messy cables. This single monitor mount comes with pre-installed cable management clips that don’t require any tools, allowing you to organize and hide cables easily. Simply snap the cables into place for a clean and tidy setup.
Full Specifications
| Brand | ErGear |
|---|---|
| Color | Black |
| Material | Alloy Steel |
| Unit Count | 1.0 Count |
| Model Number | EGDMA71B-SS-EU |
| Mounting Type | Tabletop Mount |
| Movement Type | Articulating, Swivel, Rotate, Tilt |
| Compatible Devices | Monitor |
| Enclosure Material | Alloy Steel |
| Maximum Tilt Angle | 80 Degrees |
| Warranty Description | 2-year |
| Maximum-Supported Screen Size | 34 Inches |
| Minimum-Supported Screen Size | 13 Inches |
| Full listing title | ErGear Single Monitor Arm, Adjustable Desk Gaming Monitor Mount for 13-34″ Screens, Up to 19.8 lbs, Enhanced Stability with Integrated C-Clamp, Upgraded Cable Management, VESA 75x75/100x100mm, Black |
Ready to buy?
ErGear Single Monitor Arm, Adjustable Desk Gaming Monitor Mount for 13-34″ Screens, Up to 19.8 lbs, Enhanced Stability with Integrated C-Clamp, Upgraded Cable Management, VESA 75x75/100x100mm, Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- RTX 3060 12GB vs Ryzen 7 5800X for Qwen3 14B Local Inference (2026)
- Intel Kills BigDL: The Local-LLM Path Forward in 2026
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
- LM Studio on an RTX 3060 12GB: A Zero-Terminal Local LLM Setup
- Gemma 4 31B Uncensored on a 12GB RTX 3060: What Fits, How Fast
- AMD Ryzen 7 9800X3D Bundle: DDR5 + MSI B850 Wi-Fi 7 Guide
- Ryzen 7 9800X3D vs Ryzen 9 9950X3D: Which X3D Wins at 1440p in 2026?
- llama.cpp vs Ollama on an RTX 3060: Which Runs GLM-5.2 Faster?
- GLM-5.2 vs DeepSeek V4 on a 12GB RTX 3060: Which Open-Weights Model Wins?
- OpenAI Says GPT-5.5-Cyber Beats Anthropic's Mythos on Security
- Run Qwen Locally: Apple Silicon vs a 12GB RTX 3060 Rig in 2026
- Claude Fable 5 Burns 117k Tokens/Task: Can a Local RTX 3060 Keep Up?
- AMD Ryzen AI Max for Local LLMs: What the Specs Mean
- Run DeepSeek & Qwen Locally on an RTX 3060 12GB (2026 Guide)
- Buying Pre-Owned SSDs and HDDs: Good Idea in 2026?
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5080
- Best AMD CPUs for Gaming in 2026: Top Ryzen Picks
- Best CPU Cooler for AM5 Ryzen 9 Overclocking (2026)
- Why Stock GPU Pastes Last Longer Than Aftermarket Ones
- What a $15 Raspberry Pi Zero W Can Still Do in 2026
- Can a Raspberry Pi 4 8GB Run a Local LLM? Ollama Tiny-Model Benchmarks
- MAYFLASH F300 vs DualSense for PC Rhythm Games (2026)
- Raspberry Pi 5 Price Guide: What You'll Actually Pay
- Build a PiKVM V3 Device for Remote Server Management (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090