MORIENZI FPGA Programmmer
Bottom line: The MORIENZI FPGA Programmmer is a specs-and-price decision rather than a crowd-consensus one in the emulation hardware category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Support Software version :IE8-ISE14.7、Vivado、Impact, Chipscope, Modelsim, EDK, etc
- ✓ Backed by MORIENZI's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Supports Windows and Linux operating systems (XP, WIN7, WIN8, WIN10, and others are all supported) The following are just a few examples, including but not limited to the following devices: Latest FPGAs such as Zynq-7000, Kintex-7, Artix-7, etc Spartan FPGA series, including Spartan-7, -6, etc Virtex FPGA series, including Virtex-7, -5, -6, etc XC9500/XC9500XL/XC9500XV CPLD Series CoolRunner XPLA3/CoolRunner IL CPLD Series Platform Flash XCFOOS/XCF0OP/XL PROM Series XC18V00 ISP PROM Series XC4000 series FPGA
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for MORIENZI FPGA Programmmer, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- The following are just a few examples, including but not limited to the following devices: Latest FPGAs such as Zynq-7000, Kintex-7, Artix-7, etc Spartan FPGA series, including Spartan-7, -6, etc Virtex FPGA series, including Virtex-7, -5, -6, etc XC9500/XC9500XL/XC9500XV CPLD Series CoolRunner XPLA3/CoolRunner IL CPLD Series Platform Flash XCFOOS/XCF0OP/XL PROM Series XC18V00 ISP PROM Series XC4000 series FPGA
- Support computer systems: Windows 2000, XP, Vista, Linux Operating systems such as Win7, Win8, Win10, Ubuntu, etc
- Support Software version :IE8-ISE14.7、Vivado、Impact, Chipscope, Modelsim, EDK, etc
- Product features: 1. Suitable for downloading and debugging all Xilinx CPLD/FPGA chips. 2. Supports JTAG, Slave Serial, SPI download modes, and can configure all Xilinx devices. 3. Fully compatible with Xilinx Platform USB Cable and using the latest firmware version. 4. The target device download clock is optional and supports automatic speed regulation of XILINX software. 5. Supports iMPACT and ChipScope. 6. Supports all versions of ISE8 software up to now. 7. All adapter boards adopt foolproof design.
- Package include:DLC9G FPGA Programmmer Cable*1,14pin 2.0mm cable*2,10pin 2.54mm cable*1,14pin 2.54mm cable*1,7pin dupont cable*1,6pin 2.54mm cable*1
Full Specifications
| Brand | MORIENZI |
|---|---|
| Weight | 9g |
| Connectivity | USB |
| Compatibility | Linux |
| Package include | DLC9G FPGA Programmmer Cable*1,14pin 2.0mm cable*2,10pin 2.54mm cable*1,14pin 2.54mm cable*1,7pin dupont cable*1,6pin 2.54mm cable*1 |
| Package Dimensions | 5.91 x 3.94 x 1.57 inches |
| Manufacturer Part Number | DLC9G |
| Support Software version | IE8-ISE14.7、Vivado、Impact, Chipscope, Modelsim, EDK, etc |
| Support computer systems | Windows 2000, XP, Vista, Linux Operating systems such as Win7, Win8, Win10, Ubuntu, etc |
| Full listing title | FPGA Programmmer for with Xilinx Series JTAG Debugger Compatible with XILINX Platform Cable USB FPGA CPLD DLC9 in Circuit Debugger Programmer |
Ready to buy?
FPGA Programmmer for with Xilinx Series JTAG Debugger Compatible with XILINX Platform Cable USB FPGA CPLD DLC9 in Circuit Debugger Programmer is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Emulation Hardware
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Minimal Raspberry Pi 5 Case: Friction-Fit 3D Printing Guide
- HyperX QuadCast 2 S vs Blue Yeti for Streaming in 2026
- Qwen 3.8 Open Weights: What Fits on a 12GB GPU
- What Fits in 12GB VRAM? RTX 3060 Local LLM Model Guide (2026)
- Ex-Sega Engineer Builds a 'Super-Realistic' CRT Emulator
- Logitech G502 Hero vs SteelSeries QcK: Building a Competitive FPS Loadout in 2026
- Best GPU for 1440p Esports in 2026: RTX 3060 12GB Tested
- How Fast Is Local LLM Inference on a Ryzen 7 5800X (CPU-Only, No GPU)?
- Best Budget Gaming SSDs Under $100 in 2026
- How to run Llama 3.1 8B on Arc B580
- AI Technologies We'll Realistically See in Our Lifetimes
- Can a Raspberry Pi 4 Run a Local LLM? Ollama tok/s Tested
- NVMe vs SATA for a Steam Library: 970 EVO Plus vs BX500
- Ryzen 5 2600 vs Core i7-9700K for a First 1080p Gaming Build (2026)
- The vLLM MCP Vulnerability: What Local LLM Operators Need to Do
- North Mini Code: The New Small Coding Model and the Hardware That Runs It
- How Running Out of VRAM Affects Your FPS
- Gemma 4 31B Heretic Finetune: Can It Run on a 12GB RTX 3060?
- GPU Deals for Local LLMs 2026: 12GB vs 16GB Cards
- Build a Real-Time Flight Tracker (ADS-B) on a Raspberry Pi 4 in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X vs Ryzen 7 5800X for 1080p Gaming in 2026
- Raspberry Pi 4 8GB as a 2026 Home Server: What Actually Runs Well
- Logitech G502 HERO vs G29: Which Logitech Peripheral Belongs in Your Sim Rig?
- Troubleshooting Corsair 12V-2x6 Cable Issues on RTX-Class GPUs (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090