Skip to main content
Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code
WayPonDEV

WayPonDEV Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System

Bottom line: The Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit is a specs-and-price decision rather than a crowd-consensus one in the emulation hardware category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar emulation hardware

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For emulation handhelds, FPGA consoles and flash carts, synthesises manufacturer documentation, community compatibility lists and independent reviews rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Backed by WayPonDEV's warranty and support channels

Cons

  • ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
  • ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated

Manufacturer description

-Specification-Brand Name: MaixPyDemo Board Type: FPGAMemory：128M DDR3，13Row x 10Col x 8banks x 16bitsFlash：32Mbits NOR Flash，W25Q32JVSDebugger：Jtag + Uart，JST SH1.0 8Pins connectorSD card slot 1：Push-pull typeDisplay：8Pins spi lcd connectorPackage ：204P DDR3Avaliable IO：117RGB Interface：1x RGB565 40P FPC ConnectorDVP Interface：1x 24P FPC ConnectorMic array Interface：1x 10P FPC ConnectorTouch Interface: 1x 4P FPC ConnectorPMOD Interface: 43.5mm headphone Jack: 1x LPA4809MSF driverDIP switch:1x 5P DIP switchSlide switch: 1x Switch USB function

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit… using a rating × review-volume × price-fit model applied to published specs and reviews across the emulation hardware category. WayPonDEV's emulation hardware lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for emulation hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • [High-performance DSP] Sipeed Tang Primer 20K Core Module board is sodimm package,uses GW2A-LV18PG256C8I7 as the main chip, and hasmultiple internal resources, such as high-performance DSP,high-speed LvDs interface and BSRAM resources, on-boardDDR3 and PMIC. Users could use this CM board for rapiddevelopment and verify, and it's suitable for high-speedand low-cost situations.
  • [Run RISC-V Code] Sipeed Tang Primer 20K gowin fpga development boards can burn the hardware code bitstream file ofPicoRV/Litex to Gw2A, and then use GW2A as acommon MCU. lt can run RISC-V code, conduct RISC-v soft core experiments
  • [Verilog Design] Sipeed Tang Primer 20K Dock FPGA single board computer use verilog to design custom hardware func-tions on the basic of PicoRV/Litex lP core, and at thesame time use C language to write code running onPicoRV/Litex core.
  • [Rich Peripheral interfaces] Sipeed Tang Primer 20K Dock is equipped with a wealth of pe-ripheral resources, such as onboard USB-JTAG & UARTperipheral , Ethernet PHY and RJ45 connector, USB2.0PHY，HDMIl output connector,Audio output circuit and3.5mm connector，RGB screen connector,DVP cameraconnector.
  • [PMOD interfaces] Sipeed Tang Primer 20K Lite ext-board routes so many lOs todouble row pin headers and PMOD interfaces, with whichusers could easily connect other peripheral modules or cir-cuits for secondary development.

Full Specifications

BrandWayPonDEV
Model NameSipeed Tang Primer 20K GOWIN FPGA Development Board
ConnectivityUSB
Model NumberSipeed Tang Primer
Processor BrandGowin
Processor Count1
Total Usb Ports1
RAM Memory Installed1 GB
Wireless CompabilityBluetooth
RAM Memory TechnologyDDR3
Connectivity TechnologyEthernet, GPIO, HDMI, PMOD, USB
Memory Storage Capacity32 MB
Ram Memory Installed Size1 GB
Full listing titleSipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code

Ready to buy?

Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Emulation Hardware

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Sipeed Tang Primer 20K Gowin GW2A FPGA GoAI Development Board Kit Minimum System with DSP LvDs Interface and BSRAM Resources onboard 1GB DDR3 and PMIC Running RISC-V Code
View on Amazon →