JTAG Blaster II Altera FPGA CPLD Programmer Supports JTAG, AS and PS | USB Blaster
Bottom line: Per its Amazon listing, the JTAG Blaster II Altera FPGA CPLD Programmer Supports JTAG: includes a 10 pin header with 0.1 inch pitch 5x2; the header supports Input/Ouput Voltages of +1.8V to +5.0V.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Includes a 10 pin header with 0.1 inch pitch 5x2
- ✓ The header supports Input/Ouput Voltages of +1.8V to +5.0V
- ✓ Backed by Earth People Technology's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
JTAG Blaster II ProgrammerJTAG Blaster II Provides programming for Altera devices suchas FPGAs and CPLDs and Flash Chips. Includes USB-C connectorto attach directly to USB 2.0 Port. The 10 Pin Header is pin for pincompatible with Altera USB Blaster. The JTAG Blaster uses theTarget VCC to adjust its Input/Output operation voltage.This allows the device to be compatible with chips from +1.8V to +5V.Only requires 50mA from Target VCC.The JTAG Blaster II is designed as a direct replacement for the originalUSB Blaster from Altera. The board programs Altera FPGA’s, CPLD’sand Flash chips at the…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for JTAG Blaster II Altera FPGA CPLD Programmer Supports JTAG, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the emulation hardware category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Programs Altera FPGAs, CPLDs and Flash chips. It is 100% Compatible with Quartus Prime software. The JTAG Blaster II uses the same driver as the original Altera USB Blaster. Connect it to a PC via USB-C cable and the Quartus Prime Software will fully recognize the board as a native USB Blaster. Program Altera devices using JTAG or Active Serial or Passive Serial interface.
- Programs all Altera devices including MAX II, MAX V, MAX10, Cyclone III, Cyclone IV, Cyclone V, Cyclone 10, Stratix IV, Stratix V, Stratix 10 devices. Also supports the Agilex family and the Enhanced Configuration Devices. Supports the NIOS V softcore processor. Supports the Signal Tap Logic Analyzer.
- Includes a 10 pin header with 0.1 inch pitch 5x2, Shrouded, Keyed for connection to popular Development Boards. This Header supports the Standard Altera Pinout. The pinout supports the JTAG configuration, the Active Serial configuration and the Passive Serial configuration. The header supports Input/Ouput Voltages of +1.8V to +5.0V. The JTAG Blaster II uses the Target Board voltage, VCC(Target) to power the Input/Output level shifters on board. The target board must be capable of supplying 50mA for the level shifters on the board.
- Includes a "CONNECT" LED which indicates USB Enumeration. This LED will indicate to the user that the board is properly powered, connected to the Host PC and the appropriate driver has been loaded for communication with the JTAG Blaster II. Also Included is a RGB LED to indicate programming status. The LED will indicate idle status as well as active programming. This LED will indicate to the user that the board is attempting to communicate with the target board.
- Ultra Small footprint will fit a large range of applications. Includes four 4x40 mounting holes to provide flexibility in mounting on work benches, industrial applications or motherboards. Extra robust USB-C connector with metal legs that attach directly to the PCB provides sturdy, robust connecctions when plugging/un-plugging the USB cable.Please visit the JTAG Blaster II product page under the earthpeopletechnology website to access all schematics, user manual, data sheets and project files.
Full Specifications
| Brand | Earth People Technology |
|---|---|
| CPU Model | Unknown |
| Model Name | JTAG Blaster II |
| Unit Count | 1 Count |
| Connectivity | USB-C |
| Model Number | EPT-2232H-SP-S1 |
| Compatibility | PC |
| Mfr Part Number | EPT-2232H-SP-S1 |
| Processor Brand | Intel |
| Processor Count | 1 |
| Total Usb Ports | 2 |
| CPU Manufacturer | Intel |
| Compatible Devices | Intel/Altera FPGA and CPLD devices (specifically: MAX II, MAX V, MAX10, Cyclone III, Cyclone IV, Cyclone V, Cyclone 10, Stratix IV, Stratix V) |
| RAM Memory Technology | LPDDR3 |
| Connectivity Technology | JTAG, USB |
Ready to buy?
JTAG Blaster II Altera FPGA CPLD Programmer Supports JTAG, AS and PS | USB Blaster is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Emulation Hardware
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Gaming Mouse Pad for Esports FPS in 2026
- FIDECO vs Unitek vs Vantec: Which SATA/IDE Adapter Boots Win98 from CompactFlash in 2026?
- Best Retro Gaming Storage Adapters for Win98 and DOS PCs in 2026
- Aider vs Cline vs Continue.dev for Local-LLM Coding on a 12GB GPU
- Intel llm-scaler-vllm 1.4: What Arc Pro B70 Support Means for Sub-$1500 Local Inference
- Sound Blaster Audigy 2 ZS vs Aureal Vortex 2: The Last Great Win98 Audio Battle
- Moving Files On and Off a Retro PC: CompactFlash + IDE-to-USB
- Best Budget AM4 Gaming Build Parts in 2026
- Best Wired Gear for Tournament-Legal LAN Play in 2026
- LattePanda Sigma vs Raspberry Pi 4 8GB: x86 Windows SBC vs ARM Linux for Edge AI Workloads in 2026
- Best Adaptive and One-Handed Gaming Controllers in 2026
- Best Controller for Sim Racing Beginners on PC in 2026
- Best Sim-Racing Wheel and Shifter Setup for Beginners in 2026
- Best Gaming Mice for Competitive FPS in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget 1080p Gaming Build
- Raspberry Pi 500 Specs, Price & Real-World Use in 2026
- Raspberry Pi OS Moves to Linux 6.18 LTS: What Changes for Pi Builders
- Best Mini PC Deals 2026 for Local AI and Home Labs
- Claude Sonnet 5: What Shipped and What It Means for Local Rigs
- AI-Driven Driver Install on WinXP: Vision LLM Walks the Audigy FX Setup
- Best Streaming Mic for Console Gaming in 2026: HyperX QuadCast 2 vs Blue Yeti
- Intel Arc Pro B70 vLLM Support Lands — vs RTX 3060 12GB
- Viral: Hobbyists Are Tracking Every Plane With a $50 Raspberry Pi - Here Is What You Need
- AMD Ryzen AI Max+ 395 vs Mac Studio M4 Max for Local LLM Inference
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090