BIGTREETECH
SKR Pico V1.0 Controller Board Perfectly Compatible with Voron V0.1 3D Printer, Fits for Raspberry-Pi Using Klipper Firmware, Entry-Level 4-axis DIY Motherboard
*Price sourced from Amazon.com. Last updated 2026-07-22. Price and availability subject to change.
Bottom line: The SKR Pico V1.0 Controller Board Perfectly Compatible with Voron V0.1 3D Printer, Fits for Raspberry-Pi Using Klipper Firmware, Entry-Level 4-axis DIY Motherboard is a niche pick — read recent reviews before buying in the single board computers category, priced around $35.99. Read recent reviews carefully before committing.
SpecPicks Verdict
SpecPicks classifies BIGTREETECH SKR Pico V1.0 Controller Board Perfectly Compatible with… as a niche pick — read recent reviews before buying in the single board computers category, based on our editorial and benchmark analysis and our ranking model that weights rating × review-volume × price-fit. BIGTREETECH's positioning sits within the broader category mid-tier. Use the Compare tool to put it side-by-side with two or three close alternatives before clicking through to Amazon.
Common buyer scenarios for single board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Pros & Cons
Pros
- ✓ Backed by BIGTREETECH's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
Key Features
- Using Raspberry Pi ARM Cortex-M0+ main control RP2040 microprocessor. This controller board onboard UART mode of TMC2209 and supports Klipper firmware
- BIGTREETECH SKR Pico V1.0 main control board heat sink design is newly upgraded, the heat dissipation area is enlarged, and the heat dissipation performance is greatly improved, which is both beautiful and practical
- Chip capacitors (MLCC) of the main control board are all Murata capacitors; well-known brand capacitors, with guaranteed quality and better experience
- Fuse adopts the form of "fuse holder + fuse", which is easy to disassemble; the lateral design of the main control board seat perfectly matches the space characteristics of Voron V0 machine that needs to fix the main board vertically
- ID design is newly upgraded. It adopts the Raspberry-Pi board frame, which is perfectly installation with Rasberry-Pi to save internal space. The appearance and performance coexist. It is the coolest choice for Voron players
Full Specifications
| Brand | BIGTREETECH |
|---|---|
| Color | black |
| Model | KINGPRINTER-1060000513 |
| Material | Plastic |
| Unit Count | 1.0 Count |
| Part Number | KINGPRINTER-1060000513 |
| Display Type | LCD |
| Material Type | Plastic |
| Included Components | BIGTREETECH SKR Pico V1.0 |
| Smart Home Compatibility | Not Smart Home Compatible |
Ready to buy?
BIGTREETECH SKR Pico V1.0 Controller Board Perfectly Compatible with Voron V0.1 3D Printer, Fits for Raspberry-Pi Using Klipper Firmware, Entry-Level 4-axis DIY Motherboard is available on Amazon with Prime shipping and the full Amazon returns policy. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-07-22. Price and availability subject to change.
Related Single Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Do you need a shifter for sim racing? Logitech G29 + Thrustmaster TH8A
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5080
- LM Studio vs Jan.ai vs Ollama on an RTX 3060 12GB: Which Local Runner Wins?
- Building a Retro PC Server Farm with AI: Hosting Quake 3, UT99 & OpenArena in 2026
- Stable Diffusion vs Flux — which open image model wins in 2026?
- ATI Radeon 9700 Pro Install Guide: Catalyst Versions, AGP 8x Compatibility, and Period-Correct Drivers
- Running DeepSeek Distills Locally on a Ryzen 7 5800X + RTX 3060
- pxpipe Hides Prompts in PNGs to Cut Claude Code Tokens 70% — Or Just Run Local on an RTX 3060
- Ryzen 7 5800X3D vs Core i7-14700K: DDR4's Last Big Fight
- Mistral Medium 3.5 Dense Local Inference: Hardware Tiers from 24GB to 192GB
- Transcend CF133 CompactFlash as a Retro PC Boot Drive: Setup + Gotchas
- Best SATA SSD to Upgrade Your PS4 Pro Storage in 2026
- Why NVIDIA Killed 3dfx: How the Voodoo Brand Still Haunts Modern GPU Launches
- AMD Ryzen 9 9950X Hitting 98°C While Streaming?
- GLM-5.2: The Open-Weights Model Built for Long-Horizon Agentic Tasks
- Amstrad CPC Emulator Now Runs on the Raspberry Pi Pico 2
- Qwen 3.8 Open Weights: What Fits on a 12GB GPU
- Qwen3.6-27B on Dual RTX 3060 12GB: The $400 30-50 tok/s Local LLM Build
- Best SSD for PS5 and Console-PC Hybrid Setups in 2026
- Best Mechanical Keyboard for Office and Hybrid Work in 2026
- Best Budget SSDs for Retro and Homelab Builds in 2026
- Open-Source Linux Driver Lands for the ASUS ZenVision Lid OLED
- Self-Host Jellyfin on the Raspberry Pi 4 8GB: Transcoding Limits
- Best GPU for ComfyUI & Stable Diffusion Under $300 in 2026