Monoprice 3FT 24AWG Cat5e 350MHz UTP Ethernet Bare Copper Network Cable - Gray
Bottom line: The Monoprice 3FT 24AWG Cat5e 350MHz UTP Ethernet Bare Copper Network: Bare copper conductors, not copper-clad aluminum, so Gigabit runs stay clean; main trade-off: 3 feet only, too short for anything beyond a rack or desk hop.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Bare copper conductors, not copper-clad aluminum, so Gigabit runs stay clean
- ✓ 350MHz bandwidth rating exceeds the 100MHz Cat5e minimum
- ✓ 50 microinch gold-plated contacts resist oxidation on reseated connections
- ✓ Snagless molded boots keep the RJ45 tab off rack rails and drive cages
Cons
- ✗ 3 feet only, too short for anything beyond a rack or desk hop
- ✗ Unshielded (UTP), so it is the wrong pick next to heavy electrical noise
- ✗ Cat5e caps at Gigabit, no headroom for a future 2.5G or 10G switch upgrade
- ✗ Gray jacket blends into other gray cables unless you label both ends
Manufacturer description
The Monoprice Cat5e patch cable is the 3-foot gray run you reach for when a switch, a NAS, or a vintage PC sits inches from its port and you don't want a six-foot cable coiled behind the desk. It uses bare copper conductors in 24AWG unshielded twisted pairs rated to 350MHz, which is the bandwidth headroom that lets a Cat5e run carry Gigabit Ethernet without the crosstalk problems you get from copper-clad aluminum knockoffs. The contacts are plated with 50 microinches of gold, so the connection resists the oxidation that turns an intermittent link light into an afternoon of troubleshooting…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Monoprice 3FT 24AWG Cat5e 350MHz UTP Ethernet Bare Copper Network…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. On the listing's own facts, the case for it is "Bare copper conductors, not copper-clad aluminum, so Gigabit runs stay clean"; the main trade-off is "3 feet only, too short for anything beyond a rack or desk hop". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Is this cable actually bare copper or copper-clad aluminum?
It is bare copper. Monoprice lists bare copper conductors at 24AWG, which matters because copper-clad aluminum has higher resistance and can fail on longer PoE or Gigabit runs.
Will a 350MHz Cat5e cable give me full Gigabit speeds?
Yes. Gigabit Ethernet needs 100MHz of usable bandwidth and this cable is rated to 350MHz, so there is substantial margin over the Cat5e spec at this 3-foot length.
Can I use this for 2.5GbE or 10GbE?
It is sold as a Cat5e cable, so plan around Gigabit. Short Cat5e runs sometimes negotiate faster links, but that is not a rated guarantee. Buy Cat6 or Cat6a if you need certified multi-gig.
What does snagless mean and why should I care?
The molded boot covers the base of the RJ45 release tab so it will not catch on rack rails, other cables, or a drive cage when you pull the cable out of a bundle. Fewer snapped tabs over time.
Is 3 feet long enough for my setup?
Three feet covers switch-to-patch-panel hops, router-to-modem, PC-to-wall-jack at a desk, and retro bench wiring. Measure your run first; for anything across a room, step up to a longer length.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Unshielded Twisted Pairs (UTP)
- 350MHz bandwidth
- 50µm gold plated contacts
- Color matched, snagless strain relief boots
Full Specifications
| Brand | Monoprice |
|---|---|
| Color | Gray |
| Gauge | 24.0 |
| Model | 100132 |
| Frequency | 350 MHz |
| Cable Type | Ethernet |
| Item Shape | Round |
| Model Name | Cat5e 3ft Gray Crossover Patch Cable |
| Unit Count | 1 Count |
| Item Length | 3 Feet |
| Part Number | 100132 |
| Connector Type | RJ45 |
| Number of Pins | 8 |
| Number of Items | 1 |
| Special Feature | Braided |
| Connector Gender | Male-to-Male |
| Specification Met | No |
| Compatible Devices | Personal Computer |
| Data Transfer Rate | 350 Megabits Per Second |
| Included Components | Cat5e Ethernet Patch Cable |
Ready to buy?
Monoprice 3FT 24AWG Cat5e 350MHz UTP Ethernet Bare Copper Network Cable - Gray is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- AMD Ryzen Buying Guide 2026: Every Tier Compared
- ASUS A7N8X-Deluxe + Athlon XP Barton 2500+: The Definitive 2003 Enthusiast Build Guide
- RTX 5080 vs RTX 4080 SUPER — one generation apart
- Legion Go vs Steam Deck vs ROG Ally: 2026 Buying Guide
- Ryzen AI Halo vs a DIY RTX 3060 Box for Local LLMs in 2026
- Best Parts for a Local LoRA Fine-Tuning Workstation in 2026
- Building a period-correct Windows 98 gaming rig in 2026
- Retro Nintendo Switch 2 Dock Channels the N64 and Holds Six Game Cards
- Intel Kills BigDL: The Local-LLM Path Forward in 2026
- Intel Arc Pro B60 24GB: The Cheapest 24GB Inference Card Yet?
- Best 1TB SATA SSD for Cloning Old Drives and OS Migrations 2026
- Logitech G502 Hero vs SteelSeries QcK: Building a Competitive FPS Loadout in 2026
- Ryzen AI Max+ 395 128GB vs Dual RTX 3060 for Local LLMs
- Leanstral 1.5 on the RTX 3060 12GB: Open Math and Code on a Budget GPU
- GitHub Copilot vs Claude Code vs OpenCode Benchmark 2026
- Qwen 3.6 35B-A3B-MTP on a GTX 1060 6GB: How Far Can Old GPUs Still Go?
- Best Budget PC Gaming Peripherals and Desk Setup in 2026
- OpenAI's Codex Price War: When Local Coding on an RTX 3060 Wins
- LM Studio on an RTX 3060 12GB: Local-LLM Setup and tok/s in 2026
- Best CPU Cooler for Ryzen 7 5800X Heavy Workloads (2026)
- Booting Windows 98 From CompactFlash: The Silent Solid-State Retro Drive
- Build a Sub-$60 Air Quality Monitor on a Raspberry Pi 4 (CO₂, PM2.5, VOC)
- Steam Deck OLED vs ROG Ally Z1 Extreme: 2025 Comparison
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090