Monoprice
Monoprice 1.5ft Ultra Slim SVGA Super VGA 30/32AWG M/M Monitor Cable w/ ferrites (Gold Plated Connector)
Bottom line: The Monoprice 1.5ft Ultra Slim SVGA Super VGA 30/32AWG M/M Monitor Cable ($5.09 on Amazon as of 2026-10-06): 1.5ft length cuts slack on monitor-to-tower, KVM, or rack runs; main trade-off: at 1.5ft, too short for most desk-to-floor tower runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 1.5ft length cuts slack on monitor-to-tower, KVM, or rack runs
- ✓ 30AWG coaxial conductors carry the red, green and blue color lines
- ✓ Ultra slim 30/32AWG build routes easily through tight cable channels
- ✓ Gold-plated male DE-15 (HD-15) connectors on both ends
- ✓ Ferrite cores at each end help block EMI and RFI interference
Cons
- ✗ At 1.5ft, too short for most desk-to-floor tower runs
- ✗ Analog VGA only; carries no HDMI, DVI or DisplayPort signal
- ✗ Thin 30/32AWG gauge trades some durability for slimness
- ✗ Male-to-male only; extending a cable needs a male-to-female version
Manufacturer description
The Monoprice 1.5ft Ultra Slim SVGA monitor cable is a short, thin VGA cable for setups where a longer cable only adds clutter. It carries analog VGA and extended VGA signals between two DE-15 (HD-15) ports. It suits a monitor sitting right next to a tower, a KVM switch, a rack-mounted server, or a retro PC build feeding a CRT. Inside, the three color lines (red, green and blue) run on 30AWG coaxial conductors. The remaining conductors use 32AWG stranded wire. The thin wire keeps the jacket slim and flexible enough to route through tight cable channels and behind desks. Both ends use…
SpecPicks Verdict
SpecPicks scored Monoprice 1.5ft Ultra Slim SVGA Super VGA 30/32AWG M/M Monitor Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the cables & connectors category. Monoprice's cables & connectors lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cables & connectors of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this cable work with a retro PC and a CRT monitor?
Yes, as long as both have female VGA ports. It carries analog VGA and extended VGA signals over male DE-15 (HD-15) connectors. At 1.5ft, the monitor has to sit close to the PC.
What resolution does this Monoprice VGA cable support?
Monoprice says it handles analog VGA and extended VGA resolutions but does not list a maximum. The color lines use 30AWG coaxial conductors. For exact resolution limits, check the current product listing.
Are both ends male connectors?
Yes. Both ends have gold-plated male DE-15 connectors, also called HD-15 or DB-15. They plug into the female VGA ports found on graphics cards, monitors, KVM switches and projectors.
What do the ferrite cores on this cable do?
There is a ferrite core at each end. It helps keep EMI and RFI interference out of the video signal, which is useful when the cable runs near power supplies or other cables.
Can I use this cable with an HDMI-only monitor?
Not directly. It is an analog VGA cable with DE-15 plugs on both ends. An HDMI-only display would need a separate VGA-to-HDMI converter.
Key Features
- package height : 27.2 cm
- package length : 4.3 cm
- package width :23.6 cm
- Product type:ELECTRONIC CABLE
- country of origin :China
Full Specifications
| Brand | Monoprice |
|---|---|
| Model | 106358 |
| Material | Gold |
| Cable Type | Coaxial, DVI, HDMI, VGA |
| Unit Count | 1.0 Count |
| Part Number | 106358 |
| Product type | ELECTRONIC CABLE |
| Material Type | Gold |
| package width | 23.6 cm |
| Connector Type | Vga |
| package height | 27.2 cm |
| package length | 4.3 cm |
| Item Dimensions | 5 x 4 x 5 inches |
| country of origin | China |
| Included Components | Video Cables ( 2 ) |
| Warranty Description | Lifetime Warranty |
| Item dimensions L x W x H | 5 x 4 x 5 inches |
| Recommended Uses For Product | connecting personal computer to monitor |
| Global Trade Identification Number | 00844660063582 |
Ready to buy?
Monoprice 1.5ft Ultra Slim SVGA Super VGA 30/32AWG M/M Monitor Cable w/ ferrites (Gold Plated Connector) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Cables & Connectors
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Claude Now Writes 65% of Anthropic's Code: The Local Coding-Rig Angle
- Imaging Vintage IDE & SATA Drives in 2026: USB Adapters
- Samsung's 256GB microSD Falls to $47.99 — Plus the SSD Sidegrade
- The $500M Claude Bill: What Local LLM Inference Actually Costs
- Best PlayStation 5 Controllers in 2026: 5 Picks for Every Player
- Prime Big Deal Days 2026 Desk Deals: 5 L-Shaped and Standing Desks for a Tower + Multi-Monitor Setup
- Can an RTX 3060 12GB Drive a 27-Inch 4K Monitor in 2026?
- Best Components for a Budget Local-LLM Workstation in 2026
- Building a 3dfx Voodoo2 SLI Win98 Rig with a CompactFlash Boot Drive
- Grok 4.5 Tops AutomationBench at 51%: Cloud Score vs Local-Rig Reality
- Asus ProArt PA27USD 27-Inch OLED Review: Color Meets Gaming Speed
- Noctua NH-U12S vs DeepCool AK620 for the Ryzen 7 5800X
- Best Wired Mouse and Pad for FPS in 2026: Logitech G502 Hero and SteelSeries QcK
- Ryzen 9 3900X vs Ryzen 5 5600G for CPU-Only Local LLM Inference (2026)
- Lossless Scaling on Steam Deck: Is It Worth It?
- Best CPU Cooler for Ryzen 9 3900X Overclocking in 2026
- Build a Budget Local-LLM Workstation Under $1,500: Ryzen 7 5800X + RTX 3060 12GB Benchmarks
- Building a Silent Windows 98 PC with a CompactFlash Boot Drive
- Why FurMark Has a 'GPU Killer' Reputation
- Best Budget Gaming PC Parts Under $700 in 2026
- 768GB Intel Optane DIMM Rigs: Can Cheap Persistent Memory Really Run a 1T-Parameter LLM?
- GLM-5.2: Probably the Most Powerful Text-Only Open-Weights LLM
- Gemma 4 31B Creative-Writing Finetunes on RTX 3060 12GB
- GameSir G7 SE vs DualSense for PC Emulation in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090