Timetec 16GB KIT(2x8GB) DDR3 / DDR3L 1333MHz PC3-10600 Non-ECC Unbuffered 1.5V / 1.35V CL9 2Rx8 Dual Rank 240 Pin UDIMM PC Desktop Computer Memory RAM Module Upgrade (16GB KIT(2x8GB))
Bottom line: The Timetec 16GB KIT ($37.99 on Amazon as of 2026-10-06): Dual voltage 1.35V/1.5V works in both DDR3L and standard DDR3 boards; main trade-off: desktop 240-pin UDIMM only - will not fit laptop SO-DIMM slots.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Dual voltage 1.35V/1.5V works in both DDR3L and standard DDR3 boards
- ✓ Lifetime warranty from purchase date with US-based technical support
- ✓ 2Rx8 dual-rank 512x8 layout matches what most DDR3 desktop boards expect
Cons
- ✗ Desktop 240-pin UDIMM only - will not fit laptop SO-DIMM slots
- ✗ 1333MHz PC3-10600 is the slow end of DDR3; 1600 and 1866 kits exist
- ✗ CL9 timings are stock JEDEC, not tuned for overclocking headroom
- ✗ Non-ECC, so unusable in servers or workstations needing error correction
Manufacturer description
The Timetec 16GB DDR3 kit (2x8GB) is a straightforward capacity upgrade for older Intel and AMD desktop boards that still run on 240-pin DDR3. Each module is an 8GB PC3-10600 stick clocked at 1333MHz with CL9 timings, built on a 2Rx8 dual-rank layout using 512x8 chips - the configuration most DDR3-era motherboards expect when you fill all four slots. The dual-voltage design is the part worth noting: the same stick operates at either 1.35V for DDR3L boards or 1.5V for standard DDR3, so you do not need to match a specific voltage spec before ordering. These are non-ECC unbuffered UDIMMs, which…
SpecPicks Verdict
SpecPicks scored Timetec 16GB KIT(2x8GB) DDR3 / DDR3L 1333MHz PC3-10600 Non-ECC… using a rating × review-volume × price-fit model applied to published specs and reviews across the memory & ram category. Timetec's memory & ram lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for memory & ram of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this work in my laptop?
No. These are 240-pin desktop UDIMM modules. Laptops use 204-pin SO-DIMMs, which are physically shorter and will not fit a desktop DIMM slot or vice versa.
Is this DDR3 or DDR3L - my motherboard needs one specific type?
It is both. Each module is dual voltage and operates at 1.35V (DDR3L) or 1.5V (standard DDR3), so it drops into either board type without a voltage mismatch.
Can I run this alongside RAM already in my system?
Mixing brands and ranks on DDR3 is unpredictable. This is a matched 2x8GB kit at 1333MHz CL9 2Rx8; pairing it with dissimilar sticks may force slower timings or fail to post. Check your motherboard's QVL.
What is the warranty on this kit?
Timetec lists a lifetime warranty from the purchase date, plus free technical support based in the United States. Check the product listing for current claim procedures.
Key Features
- DDR3 / DDR3L 1333MHz PC3-10600 240-Pin Non-ECC Unbuffered 1.5V / 1.35V CL9 Dual Rank 2Rx8 based 512x8
- Module Size: 16GB KIT(2x8GB Modules) Package: 2x8GB ; JEDEC standard 1.35V, this is a dual voltage piece and can operate at 1.35V or 1.5V
- PCB Color may be different (Black or Green) due to different production batches; all Timetec products are high quality and rigorously tested to meet stringent standards
- For DDR3 Desktop Compatible with Intel and AMD CPU, Not for Laptop
- Guaranteed Lifetime warranty from Purchase Date and Free technical support based on United States
Full Specifications
| Brand | Timetec |
|---|---|
| Voltage | 1.5 Volts |
| RAM Size | 16 GB |
| Model Name | 75TT133U2R8-8G |
| Form Factor | DIMM |
| Module Size | 16GB KIT(2x8GB Modules) Package: 2x8GB ; JEDEC standard 1.35V, this is a dual voltage piece and can operate at 1.35V or 1.5V |
| Memory Speed | 1333 MHz |
| Model Number | 75TT133U2R8-8G |
| Compatibility | PC |
| Number of Pins | 240 |
| Mfr Part Number | 75TT133U2R8-8G |
| Compatible Devices | Desktop |
| Data Transfer Rate | 168533344 Bits Per Second |
| Memory Form Factor | DIMM |
| Additional Features | DDR3 |
| Computer Memory Size | 16 GB |
| Warranty Description | Lifetime |
| RAM Memory Technology | DDR3 |
| Column Address Strobe Latency | CL9 |
Ready to buy?
Timetec 16GB KIT(2x8GB) DDR3 / DDR3L 1333MHz PC3-10600 Non-ECC Unbuffered 1.5V / 1.35V CL9 2Rx8 Dual Rank 240 Pin UDIMM PC Desktop Computer Memory RAM Module Upgrade (16GB KIT(2x8GB)) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Memory & RAM
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- 3dfx Voodoo3 3000 PCI vs Voodoo5 5500 AGP: Win98 Performance Synthesis (2026)
- ASRock Phantom Gaming vs Steel Legend 360 LCD Review
- Best CPU Cooler for AM5 and LGA1700 Overclocking (2026)
- Best Steam Deck Docked Setup for a 4K Desk in 2026: Dock, Monitor, Storage
- HyperX QuadCast 2 vs Blue Yeti for Streaming & Podcasting (2026)
- Revive a Dead Payphone with a Raspberry Pi Zero 2 W: Full Build Walkthrough
- Logitech G920 vs Thrustmaster: Best Beginner Sim Racing Setup 2026
- Advanced Shader Delivery on the RX 9070 XT: Benchmark Results
- Cursor Launches Its Own AI Model and Git Platform: What Changes
- Building a 2001 LAN Party Rig in 2026: GeForce 3, Pentium III, and Period-Correct Peripherals
- Raspberry Pi Projects for College Students: 2026 Guide
- Building multi-agent AI orchestrators — LangGraph, DSPy, n8n, and picking the right one
- NVIDIA DGX Spark Review: Grace Blackwell vs RTX 5090 & Mac Studio M3 Ultra
- Samsung's 2026 Odyssey Lineup Adds 5K, 6K and a 360Hz 4K QD-OLED
- DeepSWE vs SWE-Bench Pro: The Coding-Agent Benchmark Shakeup
- Qwen3.6 35B-A3B Just Cleared FoodTruck-Bench: What the MoE Sparse Path Means for 12GB Cards
- Ryzen AI Max+ 395 LLM Performance: What to Expect
- Best GPU for Ollama Under $300: Why 12GB Beats a Faster 8GB Card
- Best Wireless Gaming Controller for PC and Console (2026)
- Troubleshooting Sound Blaster Audigy FX Crackling and Driver Failures on WinXP (2026)
- Best CompactFlash to IDE Adapter for Win98 SE Builds in 2026
- When Gemini Debugs Your Linux Boot: Agentic Sysadmin on a Local RTX 3060 Rig
- Hyperscalers May Soon Outrun Their Cash Flow on AI Buildout
- Best Steam Deck Dock for 4K Gaming on a TV in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090