Roland
Roland Gold Series MIDI Cable, Angled/Straight, 5-Feet
Bottom line: The Roland Gold Series MIDI Cable ($23.99 on Amazon as of 2026-10-06): Gold-plated contacts on heavy-duty connectors resist corrosion at the DIN jack; main trade-off: 5 ft limits you to gear stacked close together; no longer length in this SKU.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Gold-plated contacts on heavy-duty connectors resist corrosion at the DIN jack
- ✓ Right-angle end tucks flat against rear panels in tight rack or desk setups
- ✓ Spiral shielding plus polyethylene insulation targets noise on long MIDI runs
- ✓ Four-conductor build covers non-standard MIDI wiring some vintage gear uses
- ✓ Roland backs it with a lifetime guarantee, rare for a MIDI cable
Cons
- ✗ 5 ft limits you to gear stacked close together; no longer length in this SKU
- ✗ Angled/straight config only fits if your jack faces the right direction
- ✗ MIDI is low-bandwidth digital, so gold contacts add durability more than tone
Manufacturer description
Roland Gold Series MIDI cables are the premium solution for connecting all your MIDI gear. Multi-strand copper wire reliably transmits your data, while high-density spiral shielding eliminates any possible interference and unwanted noise. Incorporating high-quality connectors with gold plated contacts and a heavy-duty woven outer jacket, these professional cables provide ultra-reliable operation and superior performance.
SpecPicks Verdict
SpecPicks scored Roland Gold Series MIDI Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the audio & midi category. Roland's audio & midi lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for audio & midi of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Straight to right-angle, 5 ft./1.5 m (RMIDI-G5A)
- Heavy-duty connectors with gold contacts
- Four-conductor configuration
- Low-noise design with heavy-duty polyethylene insulation
- Lifetime guarantee
Full Specifications
| Brand | Roland |
|---|---|
| Color | Gold series |
| Model | RMIDI-G5A |
| Cable Type | MIDI Cable |
| Item Shape | Round |
| Model Name | Black Series Instrument Cable, Angled/Straight 1/4-Inch Jack |
| Unit Count | 1 Count |
| Item Length | 5 feet |
| Part Number | RMIDI-G5A |
| Connector Type | Midi |
| Item Type Name | Black Series Instrument Cable, Angled/Straight 1/4-Inch Jack |
| Number of Pins | 4 |
| Outer Material | Heavy-duty woven outer |
| Maximum Voltage | 15 volts_of_direct_current |
| Number of Items | 1 |
| Special Feature | Low Noise Design |
| Connector Gender | Male-to-Male |
| Compatible Devices | Musical Instrument |
| Included Components | Cable |
| Indoor Outdoor Usage | Outdoor |
Ready to buy?
Roland Gold Series MIDI Cable, Angled/Straight, 5-Feet is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Audio & MIDI
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Intel llm-scaler-vLLM 1.4 with Arc Pro B70: Local Inference vs RTX 3060 12GB
- Matrox G400 MAX in 2026: Period-Correct Install, EMBM Showcase, and Pentium III Benchmarks
- Adafruit Reverse-Engineers the Creative Katana V2X Soundbar
- Raspberry Pi AI Module in 2026: Can a Pi + Hailo Run Local LLMs?
- Prime Big Deal Days Prebuilt PCs: RTX 5060 vs 5060 Ti vs 5070
- Q4_K_M Is Fine for Chat, a Trap for Agents: KV Cache Quant Math for Local Coding
- 8BitDo Sn30 Pro vs Pro 2: Best Bluetooth Controller for Raspberry Pi 4 Emulation
- Best GPU for Llama 3.1 405B (2026)
- Building a Period-Correct 2001 GeForce 3 + Windows 98 SE Gaming Rig
- Is the RTX 3060 12GB Still the Best Budget GPU for 1080p Esports in 2026?
- Best CPU Cooler for AM4 Ryzen Overclocking (2026 Edition)
- Glide vs OpenGL vs Direct3D: The PC Gaming API War 1996-2003, Benchmarked
- Is the RTX 3060 12GB Still Worth It for Gaming in 2026?
- Modder Runs a Counter-Strike Clone at 60 FPS on the Original PSP
- Open-WebUI Self-Hosted on a Ryzen 5 5600G + RTX 3060: A Private ChatGPT at Home
- Raspberry Pi 5 Local LLM Server: Best Models for 8GB RAM in 2026
- Complete Ollama Installation Guide for 2026: Hardware & Software Setup
- Installing 3dfx Voodoo Glide Drivers on Windows 98 in 2026
- CompactFlash as a Silent IDE Boot Drive in a Retro Windows 98 Gaming PC: Full 2026 Guide
- Microsoft Mirage Adds Persistent Spatial Memory: Can a 12GB GPU Run Local Video Gen?
- Kimi K3 Costs $10.57 per Agentic Task: Is Local Cheaper?
- Is vLLM Worth It If You're Not Serving Other Users?
- Crucial BX500 vs Samsung 870 EVO: Best Budget SATA SSD for Upgrades
- Pi Pico Puts Bluetooth Keyboards on the I2C Bus
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090