Audio-Technica AT2020 Cardioid Condenser Studio Microphone, Black (Renewed)
Bottom line: The Audio-Technica AT2020 Cardioid Condenser Studio Microphone ($107.61 on Amazon as of 2026-10-07): Cardioid pattern isolates your voice from room noise; main trade-off: renewed condition, not factory-new packaging or finish.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Cardioid pattern isolates your voice from room noise
- ✓ Flat 20-20,000 Hz response captures full vocal range
- ✓ High SPL handling suits loud sources like guitar cabs
Cons
- ✗ Renewed condition, not factory-new packaging or finish
- ✗ Needs 48V phantom power from an interface or mixer
- ✗ No USB output, so an XLR interface is required
- ✗ Fixed cardioid only, no omni or figure-8 patterns
Manufacturer description
The Audio Technica AT2020 Cardioid Condenser Microphone features an all-new proprietary design, with the proven reliability of Audio-Technica's modern engineering and manufacturing expertise. Ideal for project/home studio applications, the AT2020 features a custom-engineered low-mass diaphragm, providing extended frequency response plus the ability to handle extremely high SPLs. The AT2020 has a fixed cardioid polar pattern to allow isolation of the desired sound source. The mic features excellent performance specifications, including a flat, extended frequency response (20 - 20,000 Hz)…
SpecPicks Verdict
SpecPicks scored Audio-Technica AT2020 Cardioid Condenser Studio Microphone using a rating × review-volume × price-fit model applied to published specs and reviews across the PC & gaming hardware category. Amazon Renewed's PC & gaming hardware lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for PC & gaming hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- The price/performance standard in side-address studio condenser microphone technology
- Ideal for project/home-studio applications, High SPL handling and wide dynamic range provide unmatched versatility
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
- Custom-engineered low-mass diaphragm provides extended frequency response and superior transient response
Full Specifications
| Brand | Audio-Technica |
|---|---|
| Color | Black |
| Model Name | AT2020-CR |
| Model Number | AT2020-CR |
| Power Source | Corded Electric |
| Audible Noise | 20 Decibels |
| Polar Pattern | Unidirectional |
| Built-In Media | microphone |
| Connector Type | XLR |
| Frequency Range | 20 hz - 20 khz |
| Item Dimensions | 9.6 x 9.6 x 2.6 inches |
| Mfr Part Number | AT2020 |
| Antenna Location | Singing, Streaming |
| Compatible Devices | Personal Computer, Laptop, Professional Audio Equipment |
| Enclosure Material | Metal |
| Frequency Response | 20000 Hz |
| Number of Channels | 1 |
| Included Components | microphone |
| Warranty Description | 90 days limited warranty |
| Signal-to-Noise Ratio | 96 dB |
Ready to buy?
Audio-Technica AT2020 Cardioid Condenser Studio Microphone, Black (Renewed) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Kimi K2.7 Code: 12x Cheaper Than GPT-5.5, But Can You Run It Locally?
- Best Cooling for AMD Ryzen Overclocking in 2026
- Ollama vs llama.cpp vs LM Studio on an RTX 3060 12GB: Which Local Runner Wins in 2026?
- AMD Ryzen AI Halo vs NVIDIA DGX Spark — or Just an RTX 3060?
- Best GPU for Running Llama 8B Under $300 in 2026
- Intel Arc A770 LLM Performance: Local Inference Guide
- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- Best CPU Cooler for the Ryzen 7 5800X: Air vs AIO in 2026
- Best Budget Gaming PC Build Parts in 2026: 5 Core Picks
- LM Studio on an RTX 3060 12GB: Local-LLM Setup and tok/s in 2026
- Best Streaming Webcam and Mic Setup Under $300 (2026)
- Running Local LLMs on a Raspberry Pi 5 in 2026: What Works, What Doesn't
- Best SSD for Steam Deck and Handheld Emulation in 2026
- How to run DeepSeek-R1 32B on Arc B580
- Best Budget Gaming Headset Under $60: Turtle Beach Recon 50 vs BERIBES vs TAGRY
- Best Budget Battlestation 2026: 5 Picks That Punch Up
- Best Retro PC Upgrade Kit 2026: Sound & Storage
- Started a Homelab a Month Ago: Am I Doing It Right?
- Qwen3.6-27B at 72 Tok/s on RTX 3090: What's Real
- Mini-ITX Gaming PC in a 3D Printed Case: 2026 Builder's Guide
- Homelab Changes You Wish You'd Made Sooner
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5080
- SNES Classic vs Sega Genesis Mini: Best Plug-and-Play Retro Console in 2026
- Wooden CPU Cooler: How to Build One and What to Expect
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090