MWRF Source
MWRF Source BNC Male to BNC Male RG316 Cable (6 Inches)
Bottom line: The MWRF Source BNC Male to BNC Male RG316 Cable: True 50 Ohm RG316 coax, correct impedance for RF test gear and sync generators; main trade-off: 50 Ohm impedance mismatches 75 Ohm composite and SDI video runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ True 50 Ohm RG316 coax, correct impedance for RF test gear and sync generators
- ✓ 6-inch length keeps benchtop jumper runs tight with no coiled slack
- ✓ RG316 PTFE dielectric tolerates soldering-iron heat near the jacket
- ✓ Male-to-male BNC ends mate directly with scope, SDI, and sync-gen jacks
Cons
- ✗ 50 Ohm impedance mismatches 75 Ohm composite and SDI video runs
- ✗ 6 inches only reaches adjacent gear, not across a bench or rack
- ✗ RG316 is thin coax, so repeated flexing at the connector strains the joint
- ✗ Single cable per pack, so multi-channel scope setups need several orders
Manufacturer description
Package Include: 1 PC BNC Male to BNC Male Low Loss RG316 RF jumper cableConnector: BNC Male to BNC MaleImpedance: 50 OhmCable Type: RG316
SpecPicks Verdict
SpecPicks scored MWRF Source BNC Male to BNC Male RG316 Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the display & crt accessories category. MWRF Source's display & crt accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for display & crt accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Package Include: 1 PC BNC Male to BNC Male Low Loss RG316 RF jumper cable
- Connector: BNC Male to BNC Male
- Impedance: 50 Ohm
- Cable Type: RG316
Full Specifications
| Brand | MWRF Source |
|---|---|
| Color | Black |
| Model | BNC-Male-to-BNC-Male-RG316-6Inches |
| Connector | BNC Male to BNC Male |
| Impedance | 50 Ohm |
| Cable Type | Coaxial |
| Item Shape | Round |
| Unit Count | 1.0 Count |
| Item Length | 6 Inches |
| Compatibility | PC |
| Connector Type | RF Connector |
| Number of Pins | 2 |
| Outer Material | Plastic |
| Maximum Voltage | 50 Volts |
| Number of Items | 1 |
| Package Include | 1 PC BNC Male to BNC Male Low Loss RG316 RF jumper cable |
| Special Feature | Low Voltage |
| Connector Gender | Male-to-Male |
| Compatible Devices | PC |
| Indoor Outdoor Usage | Indoor, Outdoor |
Ready to buy?
MWRF Source BNC Male to BNC Male RG316 Cable (6 Inches) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Display & CRT Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Is the RTX 3060 12GB Still Worth Buying in 2026?
- Best Wireless Controller for PC Gaming in 2026
- Moonshot Pauses Kimi K3 Signups After GPU Demand Maxes Out
- Best CPU Coolers for Ryzen and Intel Builds in 2026
- IDE-to-USB and CompactFlash Adapters for Retro PCs: FIDECO vs Unitek vs Vantec
- Best NVMe SSD for Local LLM Model Storage in 2026
- Meta's AI Bill Hits Billions: The Case for Local Inference on a $300 GPU
- Building a 2003-Era LAN Party Rig: Pentium 4, GeForce FX 5900, Audigy 2 ZS
- CompactFlash as a Boot Disk: A Silent, Reliable Drive for Your Win98 Retro Rig
- Is My CPU Sufficient for Light Universe Simulations?
- Build a Sub-$60 Air Quality Monitor on a Raspberry Pi 4 (CO₂, PM2.5, VOC)
- Best AIO Liquid CPU Coolers for High-TDP Builds in 2026
- Best Mouse Pad for Office Productivity and Long Hours (2026)
- FIDECO vs Unitek: Best IDE-to-USB Adapter for Retro Drive Imaging
- Best Budget SSD for a Steam Library: NVMe vs SATA Game Load Times
- First-Time CPU Delidding: What to Expect and How to Get It Right
- 360mm vs 240mm AIO: Is the Bigger Radiator Worth It in 2026?
- pxpipe: Hide Text in PNGs to Cut Claude Code Token Costs up to 70%
- 3dfx Voodoo2 SLI in 2026: Building a Period-Correct Windows 98 Glide Rig
- Steam Deck OLED vs ROG Xbox Ally X: Which Handheld Wins?
- Ryzen 5 5600G vs Ryzen 7 5700X: Best Budget Build CPU 2026
- How to Build a Fully Declarative Homelab Stack
- US Forces Anthropic to Disable Claude Fable 5: Local Fallbacks
- AMD Ryzen AI Halo: A DGX Spark Rival at Mini-PC Size
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090