TOMSIN 2pcs Replacement Analog Module 3D Joystick Sensor Thumbsticks for Switch Pro Controller
Bottom line: The TOMSIN 2pcs Replacement Analog Module 3D Joystick Sensor Thumbsticks: Phillips screwdriver and double-ended spudger included, no separate teardown kit needed; main trade-off: requires moderate soldering; not a plug-in swap for most owners.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Phillips screwdriver and double-ended spudger included, no separate teardown kit needed
- ✓ Targets the exact Switch Pro drift failure: drifting, broken, and loose analog sticks
- ✓ Drop-in fit for the Switch Pro controller housing, no shimming or trimming
- ✓ Repair cost lands far under a replacement Pro controller
Cons
- ✗ Requires moderate soldering; not a plug-in swap for most owners
- ✗ No soldering iron, solder, or flux in the box despite the job needing all three
- ✗ Written instructions are not included, so you supply your own teardown guide
- ✗ Switch Pro only; Joy-Con and third-party pads are not covered
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for TOMSIN 2pcs Replacement Analog Module 3D Joystick Sensor Thumbsticks, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the joysticks & game port category before committing. On the listing's own facts, the case for it is "Phillips screwdriver and double-ended spudger included, no separate teardown kit needed"; the main trade-off is "Requires moderate soldering; not a plug-in swap for most owners". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- NOTE: Needs moderate soldering. Professional installation is highly recommended, instruction and soldering tools are not included
- COMPATIBILITY: Perfect fit for N Switch Pro controller
- HIGH-QUALITY: 100% Genuine Original Analog Module and Thumbstick of the highest quality. Fix Drifting, Broken and Loosen Joysticks on Switch Pro controller
- PACKAGE INCLUDES: 2 X 3D Analog Module, 2 X Replacement Thumbsticks, 1 X Phillips Screwdriver, 1 X Double-Ended Spudger
- To see other accessories for N Switch in our range, simply search 'TOMSIN' in the search bar above
Full Specifications
| NOTE | Needs moderate soldering. Professional installation is highly recommended, instruction and soldering tools are not included |
|---|---|
| Brand | TOMSIN |
| Color | Black |
| Material | Plastic |
| Unit Count | 2 Count |
| HIGH-QUALITY | 100% Genuine Original Analog Module and Thumbstick of the highest quality. Fix Drifting, Broken and Loosen Joysticks on Switch Pro controller |
| Model Number | VGR0047 |
| COMPATIBILITY | Perfect fit for N Switch Pro controller |
| Compatibility | Switch |
| Mfr Part Number | VGR0047 |
| PACKAGE INCLUDES | 2 X 3D Analog Module, 2 X Replacement Thumbsticks, 1 X Phillips Screwdriver, 1 X Double-Ended Spudger |
| Compatible Devices | Nintendo Switch |
| Enclosure Material | Plastic |
Ready to buy?
TOMSIN 2pcs Replacement Analog Module 3D Joystick Sensor Thumbsticks for Switch Pro Controller is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Building a Period-Correct 2001 GeForce 3 Windows 98 SE Rig — With a CompactFlash Boot Drive
- Frontier Models Cheat on Security Tests: Why You Should Eval Locally
- Best SATA/IDE-to-USB Adapters for Ripping Old Drives in 2026
- Raspberry Pi 5 Secondary Monitor Setup Guide (2025)
- Corsair's New Gaming Mouse Has a Dedicated Stream Deck Launch Button
- Linux Beats Windows 11 on the Ryzen 9 9950X3D2, Phoronix Finds
- Build a Real-Time Flight Tracker (ADS-B) on a Raspberry Pi 4 in 2026
- Can a Raspberry Pi Zero W Run a Local LLM in 2026? A Tiny-Model Reality Check
- Best SATA SSD to Revive an Old Laptop: Crucial BX500 vs Samsung 870 EVO
- 8BitDo Pro 2 vs GameSir G7 SE for Raspberry Pi Emulation
- Ryzen 7 5800X3D vs Core i7-14700K: The DDR4 Gaming Faceoff for 2026 Builders
- Wooden CPU Cooler: How to Build One and What to Expect
- Sound Blaster Audigy 2 ZS vs Sound Blaster Live! on Windows 98: Which Wins for Late-90s Gaming?
- Ryzen 7 5800X + RTX 5060 Combo Drops to $439 With Free Cooler
- RTX 4090 vs RX 7900 XTX
- How to run DeepSeek-R1 32B on AMD Radeon RX 7900 XTX
- Windows 98 vs Windows 2000 for a GeForce-Era Retro Gaming Build
- Best Budget Gaming CPU Under $250 in 2026
- Best Game Controller in 2026: 5 Picks for PC, Console and Retro
- Best Budget NVMe SSD for a Big Steam Library: WD Blue SN550 vs SATA
- Best GPU for Llama 3.1 8B (2026)
- Best budget SSD for a gaming PC in 2026: BX500 vs 970 EVO Plus vs SSD Plus
- Razer Soma Chroma Gaming Chair Review: RGB vs. Adjustability
- Best Raspberry Pi 4 Starter Kit Bundle for First-Time Robotics Builders in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090