Rubber Feet for Cutting Board with Stainless Screws, 12 Pieces Non Slip Rubber Bumper Feet for Electronics 13/16" W x 3/8" H
As an Amazon Associate, SpecPicks earns from qualifying purchases.
*Price sourced from Amazon.com. Last updated 2026-04-19. Price and availability subject to change.
Bottom line: The Rubber Feet for Cutting Board with Stainless Screws, 12 Pieces Non Slip Rubber Bumper Feet for Electronics 13/16" W x 3/8" H is a niche pick — read recent reviews before buying in the cases & modding category, priced around $11.99. Compare close alternatives before committing.
SpecPicks Verdict
SpecPicks scored Rubber Feet for Cutting Board with Stainless Screws, 12 Pieces Non… using a rating × review-volume × price-fit model applied to our editorial and benchmark analysis across the cases & modding category. TOPINSTOCK's cases & modding lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Mixed or limited buyer feedback at this price point — focus your evaluation on recent reviews that specifically address build quality and long-term reliability, and shortlist one or two close alternatives before deciding.
Common buyer scenarios for cases & modding of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the Amazon listing before purchase. Prices, stock, and Prime eligibility update directly from Amazon's catalog and may have moved since this page was last verified.
Pros & Cons
Pros
- ✓ Each pack including 12 round rubber feet and 12 matching wood screws.
- ✓ Backed by TOPINSTOCK's warranty and support channels
- ✓ Ships via Amazon with Prime eligibility and the standard returns policy
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, and Prime eligibility update from Amazon and may have changed since this page was last verified
Key Features
- Each pack including 12 round rubber feet and 12 matching wood screws.
- Perfect for cutting board feet and other wood craft projects.
- 3/8" Tall x 13/16" Top Width x 11/16" Bottom Width, Center hole 5/32" (fits #8 screws).
- Made from quality thermoplastic rubber, soft, anti-slip, anti-corrosion. Protect your counertop, cabinet from scratching, also provide good shock absorption.
- Built-in a stainless steel washer for each rubber feet, to increase stability and durability. Screw on rubber feet, easy to install.
Full Specifications
| Brand | TOPINSTOCK |
|---|---|
| Color | Black |
| Shape | Round |
| Material | Rubber, Stainless Steel |
| Unit Count | 12.0 Count |
| Grip Material | Silicone,Rubber |
| Material Type | Rubber, Stainless Steel |
| Number of Items | 24 |
| Number of Pieces | 12 |
| Additional Features | Durability |
| Surface Recommendation | Hardwood |
| Item Dimensions L x W x Thickness | 0.83"L x 0.83"W x 0.39"Th |
Ready to buy?
Rubber Feet for Cutting Board with Stainless Screws, 12 Pieces Non Slip Rubber Bumper Feet for Electronics 13/16" W x 3/8" H is sold on the used and vintage market, where eBay carries the live inventory — Amazon does not stock this part. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-04-19. Price and availability subject to change.
Related Cases & Modding
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Lemonade v10.5.1: an MTP + ROCm 7.13 quick start for Strix Halo
- Second Streaming PC vs NVENC: What an Old i7-9700K Is Still Good For
- How to Run a SATA SSD on a Windows XP Retro Gaming PC (AHCI + Adapters)
- Best SATA SSDs for Gaming and Emulation in 2026
- Rescue Dying Vintage IDE & SATA Drives with a USB Adapter Before They Fail
- Legion Go vs Steam Deck vs ROG Ally: 2026 Buying Guide
- Data Center CPU Demand Surge: AI Agents and the GPU Ratio Shift
- Wooden CPU Cooler: How to Build One and What to Expect
- Best CPU Cooler for AM5 Overclocking: Noctua NH-U12S vs Cooler Master ML240L
- Running a 1-Trillion-Parameter LLM on 768GB of Cheap Optane
- Open WebUI + Ollama on an RTX 3060: The Self-Hosted ChatGPT Alternative for 2026
- Best Game Controller for PC in 2026: 5 Picks Tested Against Real Use
- Local LLM Image Generators: Best AMD GPUs in 2025
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- Qwen3.6-27B at Q4_K_M for Agentic Coding: Is the Quant Safe on a 12GB RTX 3060?
- Sub-$300 4K Mini-LED Gaming Monitors Hit the Mainstream
- Best Controller for Steam Deck Docked Mode in 2026
- Using Claude to Hunt PCI Device IDs on Win98: Voodoo, Audigy, GeForce 4 Ti
- Raspberry Pi 4 vs Pi Zero W: Which Board for Your First Project?
- Abit BP6 Dual Celeron 366 Build Guide: The Legendary $200 SMP Workstation in 2026
- 8BitDo Pro 2 vs DualSense for PC Emulation: Which Controller Wins
- Running Mistral's New OCR Model Locally on a 12GB GPU
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
- Ryzen 5 5600G vs Ryzen 7 5700X: Best CPU for a First Gaming PC in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090