SJ@JX Arcade Game Controller Encoder 3D Analog Stick Sensor Fly Joy DIY Code Board Gamepad Joystick Button for PS4 PS3 Nintendo Switch Android Raspberry Pi Retro Pie PC
Bottom line: Per its Amazon listing, the SJ@JX Arcade Game Controller Encoder 3D Analog Stick Sensor Fly Joy: size:Board 9cm (9.5cm with USB Plug) x 4cm; USB Cable 180cm.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Compatible With:PS4, PS3, Windows 10,Nintendo Switch, Raspberry Pi, PC and Android 10.
- ✓ Backed by SJ@JX's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Description Include:1x Encoder,1x USB Cable,1x 5pin Cable,13x 2pin 2.8mm snap Cable.17x 2pin 4.8mm/0.187inch snap Cable.2x 3D Analog Joystick,2x 6pin Analog Joystick Cable. One of 2pin for L3/R3.
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for SJ@JX Arcade Game Controller Encoder 3D Analog Stick Sensor Fly Joy…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the joysticks & game port category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Easy Installation Design! Just connected the push button and joystick, really plug and play!
- Size:Board 9cm(9.5cm with USB Plug) x 4cm. USB Cable 180cm. Button and Joystick Cable 20cm.
- Compatible With:PS4, PS3, Windows 10,Nintendo Switch, Raspberry Pi, PC and Android 10.
- Hold the Mode key for 5 seconds to switch to mode.
- 3D joystick for flight simulation games, Analogue Stick Thumb sticks Joystick Cap Mushroom Head.
Full Specifications
| Size | Board 9cm(9.5cm with USB Plug) x 4cm. USB Cable 180cm. Button and Joystick Cable 20cm. |
|---|---|
| Brand | SJ@JX |
| Color | Ps4 3d |
| Connectivity | USB |
| Power Source | Corded Electric,Usb Cable |
| Compatibility | PC, PS4, PS3, Switch, Android |
| Button Quantity | 16 |
| Compatible With | PS4, PS3, Windows 10,Nintendo Switch, Raspberry Pi, PC and Android 10. |
| Controller Type | Gamepad |
| Hardware Platform | pc |
| Compatible Devices | Playstation 3, Windows |
| Additional Features | 3D Analog Joystick |
| Connectivity Technology | USB |
| Compatible Video Game Console Models | Nintendo Switch, Sony PlayStation 3, Sony PlayStation 4 |
Ready to buy?
SJ@JX Arcade Game Controller Encoder 3D Analog Stick Sensor Fly Joy DIY Code Board Gamepad Joystick Button for PS4 PS3 Nintendo Switch Android Raspberry Pi Retro Pie PC is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Joysticks & Game Port
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Ryzen AI Halo vs a DIY RTX 3060 Box for Local LLMs in 2026
- Best Wireless Gaming Controller for PC and Console (2026)
- Windows XP Gaming in 2025: Hardware, Fixes, Best Games
- Best Budget SATA SSD for a Retro PC Build in 2026
- Best Streaming Setup for PC Gamers in 2026: 5 Picks Under $500
- Sony to End Physical PlayStation Disc Production by 2028: What It Means for Retro Collectors
- Voodoo3 3000 vs GeForce 256: 1999 Glide vs OpenGL Showdown
- Best Budget 1080p Gaming PC Parts in 2026: 5 Picks
- Aider vs Cline vs Cursor for Local + Cloud Coding in 2026
- Build a Raspberry Pi 4 Cyberdeck Music Workstation in 2026
- Best 1TB SATA SSD for Cloning Old Drives and OS Migrations 2026
- Raspberry Pi 5 + Hailo-8L vs Coral Dual Edge TPU: Which AI Accelerator HAT Wins in 2026?
- Best GPU for Qwen 3 14B (2026)
- Intel Arc B60 Stable Diffusion: Setup & Benchmarks 2025
- ComfyUI on a 12GB RTX 3060: Install + Stable Diffusion Throughput 2026
- Asus ROG Harpe II Extreme Lands With a 65K-DPI Sensor
- Best Raspberry Pi 5 Starter Kits and Accessories for Home Lab Builds (2026)
- Best CPU Coolers for Ryzen in 2026: 5 Tested Picks
- How to run Qwen 3 14B on Apple M4 Pro
- Self-Host NextCloud on a Raspberry Pi 4 8GB: A Complete Private-Cloud Build for 2026
- Best budget SSD for a gaming PC in 2026: BX500 vs 970 EVO Plus vs SSD Plus
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 3090
- Meta Is 'Token Managing' Now: Cut Local-LLM Cost on a Single RTX 3060
- Best Sim Racing Wheel for Forza Horizon 6 on PC in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090