uxcell
uxcell M4 Hex Brass Standoff Spacer 25mm+6mm Male-Female Threaded Pillar Screw Nut Kit
Bottom line: The uxcell M4 Hex Brass Standoff Spacer 25mm+6mm Male-Female Threaded is a specs-and-price decision rather than a crowd-consensus one in the tools & maintenance category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Size - Hex Standoff Size: M4x25mm+6mm; Screw Size: M4x6mm; Nut Size: M4
- ✓ Backed by uxcell's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored uxcell M4 Hex Brass Standoff Spacer 25mm+6mm Male-Female Threaded… using a rating × review-volume × price-fit model applied to published specs and reviews across the tools & maintenance category. uxcell's tools & maintenance lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Size - Hex Standoff Size: M4x25mm+6mm; Screw Size: M4x6mm; Nut Size: M4
- Material - These standoffs are made of brass, and come in male-female forms, good mechanical strength, wear resistance, and corrosion resistance.
- Applications - Widely used in printed-circuit board, quadcopter drone, and computer, etc
- Easy to Install - The thread is very sharp, clean, and accurate. Accurate dimensions make your installation or maintenance easier.
- Package Includes: 10pcs x M4 Nuts, 10pcs x M4 Screws, 10pcs x M4x25mm+6mm Brass standoffs
Full Specifications
| Brand | uxcell |
|---|---|
| Material | Brass |
| Metal Type | Brass |
| Thread Size | M 4 |
| Fastener Type | Hex |
| Exterior Finish | Brass |
| Package Includes | 10pcs x M4 Nuts, 10pcs x M4 Screws, 10pcs x M4x25mm+6mm Brass standoffs |
| Size - Hex Standoff Size | M4x25mm+6mm; Screw Size: M4x6mm; Nut Size: M4 |
| Full listing title | uxcell M4 Hex Brass Standoff Spacer 25mm+6mm Male-Female Threaded Pillar Screw Nut Kit for PCB Motherboard Computer Circuit Board, 10 Sets |
Ready to buy?
uxcell M4 Hex Brass Standoff Spacer 25mm+6mm Male-Female Threaded Pillar Screw Nut Kit for PCB Motherboard Computer Circuit Board, 10 Sets is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Build a RetroPie Handheld with the Raspberry Pi Zero W in 2026: Full BOM + Setup
- Retro Console on a Modern TV: Fix the Blur (2026 Guide)
- CPU Fan Angled Left on a New Prebuilt: Normal or Not?
- Bilingual Voice Agents: Frontier ASR on Code-Switched Speech
- How to Find and Join Active Quake 3 and UT99 Servers in 2026
- Ryzen 5 5600G vs RTX 3060 12GB for Entry Local LLM Inference (2026)
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- How Secure Is My Homelab Compared to Big Companies?
- Did the Steam Deck Get a New Box Design? What Changed
- Building a Period-Correct 2002 GeForce 4 Ti + Pentium 4 Northwood Win98/XP Dual-Boot
- Razer Blade 16 (2026) Review: Gaming Performance and Endurance
- Qwen 3.6 35B-A3B on RTX 3060 12GB: Local LLM Throughput Guide (2026)
- Homelab Month One: Raspberry Pi 4 or a Ryzen 5 Mini-PC?
- 3dfx Voodoo2 SLI in 2026: Building a Period-Correct Windows 98 Glide Rig
- Best CPU Cooler for the Ryzen 7 5800X: Air vs 120mm vs 240mm AIO
- Turn a Raspberry Pi Pico W Into a Driverless USB WiFi Adapter
- Running Gemma 4 31B Finetunes Locally: Dual RTX 3060 12GB vs Single 24GB Card
- Best Sim Racing Wheel for Beginners: G29 vs HORI vs Thrustmaster
- PC Sim Racing Wheels in 2026: Logitech G29, Thrustmaster and HORI Compared
- Intel Arc A770 LLM Performance: Local Inference Guide
- Can a Raspberry Pi 4 8GB Run Local LLMs in 2026?
- Best Budget Internal SSD for 2026: 5 Picks Tested by Value
- Logitech G502 Hero vs HyperX QuadCast 2 S vs Elgato Cam Link 4K: Building a Sub-$300 Streaming Starter Kit
- Is the KOORUI 27" 4K QD-Mini LED Worth It for RTX 3060 Gaming?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090