Skip to main content
cablecc SATA Disk to IDE/PATA 40Pin Motherboard Converter Adapter PCBA for Desktop & 2.5 3.5" Hard Disk Drive
cablecc

cablecc SATA Disk to IDE/PATA 40Pin Motherboard Converter Adapter PCBA for Desktop & 2.5 3.5" Hard Disk Drive

Status: cablecc SATA Disk to IDE/PATA 40Pin Motherboard…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: The cablecc SATA Disk to IDE/PATA 40Pin Motherboard Converter Adapter PCBA: Bridges any 2.5 or 3.5 inch SATA drive to a 40-pin IDE motherboard header; main trade-off: not hot swappable - the system must be powered down before connecting.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: BENFEI SATA to USB 3.0 Cable — $15.99 on Amazon as of 2026-11-20 23:14 UTC (price may vary).

Similar: UGREEN SATA to USB 3.0 Adapter Cable for… — $17.08 on Amazon as of 2026-11-20 23:13 UTC (price may vary).

Similar: FIDECO SATA/IDE to USB 3.0 Adapter — $19.19 on Amazon as of 2026-11-20 23:13 UTC (price may vary).

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Bridges any 2.5 or 3.5 inch SATA drive to a 40-pin IDE motherboard header
  • ✓ Supports IDE 66, 100, and 133MB/s transfer modes
  • ✓ Master and slave jumpers included for correct channel positioning
  • ✓ No driver install - the drive appears as a standard IDE device
  • ✓ Compatibility listed from DOS and Windows 98 through Windows 10 and Linux

Cons

  • ✗ Not hot swappable - the system must be powered down before connecting
  • ✗ Throughput is capped by the IDE bus, not the SATA drive's rated speed
  • ✗ Bare PCBA with no enclosure or mounting bracket in the listing
  • ✗ Manufacturer does not list BIOS capacity limits, so large-drive support is unverified

Manufacturer description

The cablecc SATA to IDE 40-pin converter solves a specific problem for anyone keeping a legacy desktop alive: your motherboard only speaks PATA, but the drive you want to install is SATA. This PCBA board bridges that gap, letting you connect any 2.5-inch or 3.5-inch SATA hard drive or SSD to a 40-pin IDE mainboard header. It supports IDE transfer modes at 66, 100, and 133MB/s, and includes master/slave jumpers so you can position the drive correctly on the channel alongside an optical drive or second disk. No drivers are required. The adapter presents the SATA drive to the system as a…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for cablecc SATA Disk to IDE/PATA 40Pin Motherboard Converter Adapter PCBA, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "Bridges any 2.5 or 3.5 inch SATA drive to a 40-pin IDE motherboard header"; the main trade-off is "Not hot swappable - the system must be powered down before connecting". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this let me put an SSD in an old IDE-only PC?

Yes. cablecc lists the adapter as suitable for upgrading an old computer from a 3.5-inch IDE HDD to a 3.5-inch SATA HDD or SSD, and it works with all 2.5 and 3.5-inch SATA drives.

Do I need to install a driver?

No. The adapter is plug and play with no driver needed - the SATA drive is presented to the motherboard as a standard IDE device.

Can I hot swap drives with this adapter?

No. cablecc explicitly states the unit is not hot swappable. Shut the system down and disconnect power before attaching or removing the drive.

How do I set it as a primary or secondary drive?

The board includes master and slave jumpers, so you can configure the drive's position on the IDE channel the same way you would with a native PATA disk.

What operating systems does it work with?

cablecc lists DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, 7, 8, and 10, plus Linux. Because no driver layer is involved, OS support tracks whatever the motherboard's IDE controller already handles.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 3.5 inch SATA HDD Drive to IDE 40Pin mainboard converter Board
  • Works with all 2.5/3.5" SATA Drives. Supports IDE 66/100/133MB/s. With Master and slave jumper.
  • No driver needed, plug and play, unit is not hot swappable.
  • Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD.
  • Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Windows 8 & Windows 10& Linux.

Full Specifications

Brandcablecc
ColorGreen SATA Disk to IDE/PATA 40Pin
ModelEP-014-CC
Cable TypeSATA
Unit Count1.0 Count
Part NumberEP-014-CC
CompatibilityLinux
Connector TypeSata
Number of Pins40
Maximum Voltage5 Volts
Special FeatureHigh Speed
Connector GenderMale-to-Female
Compatible DevicesPC
Data Transfer Rate133 Megabytes Per Second
Indoor Outdoor UsageIndoor
Connectivity TechnologySATA
Recommended Uses For ProductConnecting SATA hard drives to IDE/PATA motherboards for data transfer and computer upgrades
Other Special Features of the ProductHigh Speed

Ready to buy?

Amazon shows no buyable offer for cablecc SATA Disk to IDE/PATA 40Pin Motherboard… at the last check. A similar in-stock product is BENFEI SATA to USB 3.0 Cable. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $15.99

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
BENFEI SATA to USB 3.0 Cable
This listing is unavailable. Similar, in stock:
BENFEI SATA to USB 3.0 Cable
Similar, in stock — $15.99 →