Skip to main content
BENFEI SATA to USB Cable, 2in1 USB-C/USB 3.0 to SATA III Hard Driver Adapter Compatible for 2.5 inch HDD and SSD
BENFEI

BENFEI SATA to USB Cable

Bottom line: The BENFEI SATA to USB Cable ($8.99 on Amazon as of 2026-10-08): 2-in-1 head: USB-C and USB 3.0 Type-A, no separate dongle needed; main trade-off: 2.5-inch SATA drives only; no 3.5in, 5.25in, or M.2 support.

$8.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-08. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ 2-in-1 head: USB-C and USB 3.0 Type-A, no separate dongle needed
  • ✓ UASP support: up to 70% faster reads, 40% faster writes vs plain USB 3.0
  • ✓ Plug-and-play, no drivers and no enclosure teardown
  • ✓ 18-month BENFEI warranty included

Cons

  • ✗ 2.5-inch SATA drives only; no 3.5in, 5.25in, or M.2 support
  • ✗ No external power, so power-hungry drives may not spin up reliably
  • ✗ Bare cable leaves the drive unprotected during transfers
  • ✗ 5 Gbps ceiling limits fast SATA SSDs below their full potential

Manufacturer description

Turn any 2.5-inch SATA SSD or hard drive into instant external storage with the BENFEI SATA to USB cable. The 2-in-1 connector gives you both USB-C and USB 3.0 Type-A ends, so the same cable works with a modern ultrabook, an older desktop, or a docking station without an adapter chain. There is no enclosure to open and no driver to install: plug the SATA end into the drive, pick the USB end your machine takes, and the volume mounts. The cable runs at USB 3.0 SuperSpeed, up to 5 Gbps, and stays backward compatible with USB 2.0 and 1.1 ports. UASP support pushes that further on capable hosts…

SpecPicks Verdict

SpecPicks scored BENFEI SATA to USB Cable using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. BENFEI's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this work with a 3.5 inch desktop hard drive?

No. BENFEI lists this cable as compatible with 2.5-inch SATA drives only; 3.5-inch, 5.25-inch, and M.2 drives are not supported. A 3.5-inch drive also needs its own power supply, which this bus-powered cable does not provide.

Does it work with both USB-C and USB-A ports?

Yes. This is the 2-in-1 version with a USB-C connector and a USB 3.0 Type-A connector, so one cable covers a USB-C laptop and an older Type-A desktop port.

How fast is it in practice?

The USB 3.0 interface tops out at 5 Gbps, and UASP adds up to 70 percent faster reads and 40 percent faster writes over standard USB 3.0 per BENFEI. Actual throughput depends on your drive and host port.

Do I need to install drivers or software?

No. BENFEI describes it as plug-and-play with no driver installation. Connect the SATA end to the drive, plug in the USB end, and the drive mounts through your operating system.

Can I use it to clone a laptop drive or recover files from an old one?

Yes, that is a primary use case BENFEI lists: adding storage, running backups, creating disk images, performing data recoveries, and transferring content, all without mounting the drive in an enclosure. Use your own cloning or imaging software.

What warranty comes with it?

BENFEI includes an 18-month warranty on this cable. Check the product listing for current terms and support contact details.

Key Features

  • QUICKLY ACCESS A SATA SSD OR HDD: Add drive space to your laptop by connecting to a SATA 2.5" SATA SSD or HDD using this SATA to USB cable. You can connect to an external drive to: add storage, perform backups, create disk images, implement data recoveries, and transfer content to your laptop. Cable will work ONLY with 2.5" SATA drives.❌3.5"/5.25" and M.2 drives are NOT SUPPORTED.
  • SuperSpeed USB 3.0: Data transfer rates of up to 6Gbps only for SSD. USB 3.0 version, supports data transfer speeds up to 5 Gbps, Backward compatible with USB 2.0 / 1.1. (Note: actual rate will depend on the capability of your device.)
  • UASP Function: Provides faster transfers up to 70% faster read speeds and 40% faster write speeds over traditional USB 3.0
  • SAVE TIME: The hard drive transfer cable lets you easily swap between drives with no need to install the drive inside an enclosure. It’s plug-and-play and doesn’t require drivers.
  • 18 MONTH WARRANTY - Exclusive BENFEI Unconditional 18-month Warranty ensures long-time satisfaction of your purchase; Friendly and easy-to-reach customer service to solve your problems timely.

Full Specifications

BrandBENFEI
ColorUSB 3.0 to Sata
Gauge15
Model000193black
Frequency5 GHz
Cable TypeUSB
Item ShapeRound
Model NameUSB to 2.5 SSD/HDD
Unit Count1.0 Count
Part Number000193black
ConnectivityUSB-C
UASP FunctionProvides faster transfers up to 70% faster read speeds and 40% faster write speeds over traditional USB 3.0
Connector TypeUsb 3.0,usb-c
Number of Pins16
Maximum Voltage5 Volts (DC)
Number of Items1
Special FeaturePortable
Connector GenderMale-to-Female
Specification MetCE, USB-IF
Compatible Devices2.5 inch HDD and SSD
Full listing titleBENFEI SATA to USB Cable, 2in1 USB-C/USB 3.0 to SATA III Hard Driver Adapter Compatible for 2.5 inch HDD and SSD

Ready to buy?

BENFEI SATA to USB Cable, 2in1 USB-C/USB 3.0 to SATA III Hard Driver Adapter Compatible for 2.5 inch HDD and SSD is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $8.99

*Price sourced from Amazon.com. Last updated 2026-10-08. Price and availability subject to change.

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →