Skip to main content
VPFET HDMI Extender Splitter 1 in 2 Out Over Cat5e or 6 Ethernet Adapter Up to 165FT HD1080P60Hz with Loop Support EDID Copy Settings HDCP
VPFET

VPFET HDMI Extender Splitter 1 in 2 Out Over Cat5e or 6 Ethernet Adapter Up to 165FT HD1080P60Hz with Loop Support EDID Copy Settings HDCP

Bottom line: The VPFET HDMI Extender Splitter 1 in 2 Out Over Cat5e or 6 Ethernet: Splits 1 HDMI source to 2 displays over Cat6 at up to 165ft, 130ft on Cat5e; main trade-off: caps at 1080p60/1920x1200 - no 1440p or 4K support.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar retro networking cards

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Splits 1 HDMI source to 2 displays over Cat6 at up to 165ft, 130ft on Cat5e
  • ✓ PoC powers the receiver over the network cable, only the TX needs the 12V adapter
  • ✓ Two local loop-out ports drive nearby displays alongside the extended runs
  • ✓ EDID preset modes on the TX help match odd sources to odd displays
  • ✓ Uncompressed 1080p60/1920x1200 with PCM, DTS and DSD audio passthrough

Cons

  • ✗ Caps at 1080p60/1920x1200 - no 1440p or 4K support
  • ✗ Cat5 runs drop the reach to roughly 100ft, well under the 165ft headline
  • ✗ Wiring 12V to the RX instead of the TX damages the unit per the maker

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored VPFET HDMI Extender Splitter 1 in 2 Out Over Cat5e or 6 Ethernet… using a rating × review-volume × price-fit model applied to published specs and reviews across the retro networking cards category. VPFET's retro networking cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for retro networking cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • 【HDMI Extender splitter over CAT6】The HDMI extender splitter can split One HDMI signal into two identical Signals and run up to 165ft through the CAT6 cable with two Loop-Out Local Display
  • 【Power on CAT6】HDMI extender 1 in 2 out Using POC technology, we only need to use the power supply at TX, and Rx can work through the network cable transmission power supply. Low to 5V voltage transmission, safe and reliable. (Notes: 12V power must be connected to TX, otherwise the device will be damaged.)
  • 【HDMI Extender Splitter Support EDID Preset】According to different application requirements, the TX supports a variety of EDID preset programs to improve the compatibility of the equipment, which can better match the signal source and display to get the most suitable video and audio signal
  • 【No compression Transmission】HDMI extender splitter 1x2 support resolution up to 1920x1200@60Hz and 1080p@60Hz. Support audio format: PCM/DTS/ DSD. Suggested length: Cat6/7--165 ft, Cat5e--130 ft, Cat5--100 ft
  • 【HDMI Extender Splitter Has Auto EQ Fuction】Plug & play setup without any software installation. Chip built-in automatic algorithm, no need to manually adjust the receiver equalization settings to compatibility with cable transmission distance. This unit requires only one power adapter to work

Full Specifications

BrandVPFET
ColorBlack
Unit Count1 Count
Model NumberEX60H-712
Connector TypeHDMI
Item Dimensions0.31 x 0.16 x 0.08 inches
Mfr Part Number20221019
Number of Items5
Number of Ports3
Power Plug TypeType A - 2 pin (North American)
Compatible DevicesTelevision
Item dimensions L x W x H0.31 x 0.16 x 0.08 inches

Ready to buy?

VPFET HDMI Extender Splitter 1 in 2 Out Over Cat5e or 6 Ethernet Adapter Up to 165FT HD1080P60Hz with Loop Support EDID Copy Settings HDCP is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Retro Networking Cards

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
VPFET HDMI Extender Splitter 1 in 2 Out Over Cat5e or 6 Ethernet Adapter Up to 165FT HD1080P60Hz with Loop Support EDID Copy Settings HDCP
View on Amazon →