GeeekPi

GeeekPi Mini Tower NAS Kit for Raspberry Pi 4

Name: GeeekPi Mini Tower NAS Kit for Raspberry Pi 4, Pi 4 ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board, 18W
Brand: GeeekPi
SKU: B09LD3JQGV

Status: GeeekPi Mini Tower NAS Kit for Raspberry Pi 4: Unavailable on Amazon as of 2026-10-22 10:29 UTC. SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

🛒 Search eBay for this model

Bottom line: The GeeekPi Mini Tower NAS Kit for Raspberry Pi 4: Bundled M.2 SATA SSD shield supports 2280/2260/2240 drives up to 2TB; main trade-off: SATA only, no NVMe support, which rules out most current M.2 drives.

Unavailable on Amazon as of 2026-10-22 10:29 UTC

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — an in-stock alternative:

Similar: GeeekPi 18W 5V 3.6A Power Supply for Raspberry… — $10.99 on Amazon as of 2026-10-25 04:15 UTC (price may vary).

View Current Price — $10.99

Original listing (currently unavailable) → Compare to similar single-board computers

By Mike Perry, Founder & Editor-in-Chief · Listing data updated 2026-10-22

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides. About the author →

Pros & Cons

Pros

✓ Bundled M.2 SATA SSD shield supports 2280/2260/2240 drives up to 2TB
✓ 0.96-inch OLED comes pre-mounted on the case, no soldering or drilling
✓ ICE Tower cooler with PWM RGB fan handles sustained Pi 4 NAS workloads
✓ GPIO 1-to-2 edge expansion board keeps header pins free for HATs
✓ 18W QC3.0 supply included, so no separate Pi 4 power brick needed

Cons

✗ SATA only, no NVMe support, which rules out most current M.2 drives
✗ RGB fan and mood light stay dark until you install the driver
✗ OLED shows nothing until you manually enable it over I2C at 0x3C
✗ Raspberry Pi 4 Model B and the M.2 SSD are both sold separately

Manufacturer description

About this item This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host. NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!! The 0.96 inch OLED screen was already…

SpecPicks Verdict

SpecPicks scored GeeekPi Mini Tower NAS Kit for Raspberry Pi 4 using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. GeeekPi's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host.
NOTE The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!
The 0.96 inch OLED screen was already mounted on the case.28x64pixels, default I2C address 0x3C
M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive
Package Includes 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x QC 3.0 Power supply,1 x Assembly manual(Note Raspberry Pi 4B is Not included in the package)

Full Specifications

ASIN	B09LD3JQGV
Brand	GeeekPi
Model Name	Raspberry Pi 4
Item Weight	360 Grams
Manufacturer	GeeekPi
Model Number	Raspberry Pi 4
Mfr Part Number	K-0612-EU
Processor Brand	ARM
Processor Count	1
Total Usb Ports	2
Compatible Devices	Servers
RAM Memory Installed	2 TB
Warranty Description	6 months
Wireless Compability	Bluetooth
RAM Memory Technology	LPDDR4
Connectivity Technology	USB
Memory Storage Capacity	2 TB
Ram Memory Installed Size	2 TB
Full listing title	GeeekPi Mini Tower NAS Kit for Raspberry Pi 4, Pi 4 ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board, 18W QC3.0 Power Supply for Raspberry Pi 4 Model B

Hardware benchmark data

Ready to buy?

Amazon shows no buyable offer for GeeekPi Mini Tower NAS Kit for Raspberry Pi 4 at the last check. A similar in-stock product is GeeekPi 18W 5V 3.6A Power Supply for Raspberry…. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $10.99